Q2. For The Stool Shown in Figure Bellow Simulate: A) The Total Deformation and The Equivalent Stress Due To The Applied Load. B) The Buckling Analysis To Determine Load Multiplier
The document provides instructions for a mechanical engineering examination on computer-aided engineering (CAE). Students are asked to simulate the deformation, equivalent stress, and buckling analysis of a stool under an applied load using CAE software. The stool model is an aluminum stool with a 750N force applied at its top surface and its lower surface fixed. The analysis should consider steady state elastic deformation.
The document provides instructions for a mechanical engineering examination on computer-aided engineering (CAE). Students are asked to simulate the deformation, equivalent stress, and buckling analysis of a stool under an applied load using CAE software. The stool model is an aluminum stool with a 750N force applied at its top surface and its lower surface fixed. The analysis should consider steady state elastic deformation.
Q2. For The Stool Shown in Figure Bellow Simulate: A) The Total Deformation and The Equivalent Stress Due To The Applied Load. B) The Buckling Analysis To Determine Load Multiplier
The document provides instructions for a mechanical engineering examination on computer-aided engineering (CAE). Students are asked to simulate the deformation, equivalent stress, and buckling analysis of a stool under an applied load using CAE software. The stool model is an aluminum stool with a 750N force applied at its top surface and its lower surface fixed. The analysis should consider steady state elastic deformation.
First Term Examination 2016/2017 Subject: CAE Year: 4th year classes Division: Automotive Engineering Time: 1.5 Hrs. Examiner(s): CAE group Date: 24 / 1 / 2017
Note: 1. Assume any missing data. 2. All dimensions in centimeters.
Q2. For the stool shown in figure bellow simulate:
A) The total deformation and the equivalent stress due to the applied load. B) The Buckling analysis to determine load multiplier. Assumptions: Steady state Material: Aluminum Elastic deformation. Y