Professional Documents
Culture Documents
Gponomciv2voiceconfigurationintroduction PDF
Gponomciv2voiceconfigurationintroduction PDF
CONFIGURATION INTRODUCTION
Author&History
• 2014-01-21 Xu Ronghua
• Ronghua.xu@alcatel-sbell.com.cn
• GPON OMCI V2 VOICE CONFIGURATION
INTRODUCTION
Test Network
GPON G.984.4 SIP
GPON G.984.4 H.248
GPON G.984.4 voice
OMCIv2 ME’s
IP Host Config data
TCP/UDP Config data
VoIP Config data
VoIP Voice CTP
VoIP Media profile
RTP Profile data
Voice Service Profile
PPTP POTS UNI
SIP User Data
SIP Agent Config Data
Network Dial Plan Table
VoIP Application Service Profile
RTP Performance Monitoring History Data
Call Control Performance Monitoring History Data
SIP Call Initiation Performance Monitoring History Data
SIP Agent Performance Monitoring History Data
GPON OMCI V2 Service Model
GPON OMCI V2 voice configuration
OLT Configuration for data
Add ONT
• configure equipment ont interface 1/1/7/2/3 sernum ALCL:FAAA865E sw-ver-pland
3FE54869ACEB04 voip-allowed iphost
• admin-state up
Create service vlan
• configure vlan id 96 mode residential-bridge in-qos-prof-name name:Default_TC0
• Create BW profile
• configure qos profiles bandwidth 101 excessive-info-rate 10000 assured-info-rate 10000
committed-info-rate 10000 delay-tolerance 5
Create vpls service
• configure service vpls 96 v-vpls vlan 96 customer 1 create no shutdown
• configure service vpls 96 stp shutdown
• configure service vpls 96 sap nt-a:xfp:2:96 create no shutdown
• configure service vpls 96 sap lt:1/1/7:96 create no shutdown
GPON OMCI V2 voice configuration
Create QoS interface
• configure qos interface 1/1/7/2/3/voip upstream-queue 0 priority 8 weight 20
bandwidth-profile name:101 bandwidth-sharing ont-sharing
• configure qos interface 1/1/7/2/3/voip upstream-queue 1 priority 8 weight 20
bandwidth-profile name:101 bandwidth-sharing ont-sharing
Create bridge port
• configure bridge port 1/1/7/2/3/voip
• configure bridge port 1/1/7/2/3/voip vlan-id 96 vlan-scope network tag
untagged
• configure bridge port 1/1/7/2/3/voip pvid 96
Configure IP Host
• configure iphost ont ont:1/1/7/2/3/1 dhcp enabled vlan 96
admin-state up
GPON OMCI V2 voice configuration
NOTE:
outproxyserv-prof:It is an optional field, but if you enter a value then all SIP requests
get sent there in the first instance,therefore if you’ve configured outproxyserv-prof not
null , the proxyserv-prof and registrar-prof are useless
outproxyserv-prof and dns could be covered by iphost ip dhcp if dhcp offer option 6
and 120 (ip or domain name)
GPON OMCI V2 voice configuration
POTS UNI
Configure ONT POTS card
• configure equipment ont slot 1/1/7/2/3/2 planned-card-type pots
plndnumdataports 0 plndnumvoiceports 2 admin-state up
Configure rtp-profile / voice-serv-prof / voip-media-prof / app-serv /
acccode-prof
• configure voice ont rtp-profile 9 name voip_sip local-port-min 5000 local-port-
max 60000 dscp 1 tone-event disabled dtmf-event disabled cas-event
disabled
• configure voice ont voice-serv-prof 6 securi-prof 10 toneset-prof 0 ringingset-
prof 0 announce-type not-applicable jitter-target 0 jitter-max 0 echo-cancel
enabled pstn-variant 0 dtmf-duration 0 hook-flash-min 100 hook-flash-max
300 dtmf-level 0 name voice_sev_profile_6
• configure voice ont voip-media-prof 7 name voipmedia_prof_7
voiceserviceprof 6 rtp-prof 9 fax-mode passthru codec1st pcma pkt-period1st
20 silence1st on outofband-dtmf enabled codec2nd g729 pkt-period2nd 20
silence2nd on
• configure voice ont voip-app-service 7 name voipappserv_prof_7 caller-id-
block disable caller-id-number private caller-id-name private call-waiting
enable call-transfer enable call-hold enable call-park enable call-fwd-indicate
enable mwi-visual-indi enable mwi-spl-dialtone enable
• configure voice ont feat-acccode-prof 2 name access_code_prof_2 park 007
GPON OMCI V2 voice configuration
Configure SIP POTS Port
• configure voice ont voice-sip-port 1/1/7/2/3/2/1 user-aor +862188881335
user-name privid88881335 display-name 88881335 password newsys
realm shanghai.ims.com ac-code-prof 2 app-serv-prof 7
• configure voice ont voice-sip-port 1/1/7/2/3/2/2 user-aor +862188881336
user-name privid88881336 display-name 88881336 password newsys realm
shanghai.ims.com ac-code-prof 2 app-serv-prof 7
• configure voice ont voice-port 1/1/7/2/3/2/1 custinfo 88881335 voipconfig sip
pots-pwr-timer 0 call-hist disable pwr-override false rx-gain 0 tx-gain 0 voip-
media-prof 7 admin-state unlocked
• configure voice ont voice-port 1/1/7/2/3/2/2 custinfo 88881336 voipconfig sip
pots-pwr-timer 0 call-hist disable pwr-override false rx-gain 0 tx-gain 0
voip-media-prof 7 admin-state unlocked
XML file In ONT
Basic call
securi-prof
uri-prof(FTP) auth-sec-prof(password)
OMCI V2 H.248 configuration process
Basic call
Mgc-uri voip-media-prof
voice-serv-prof rtp-profile
securi-prof
uri-prof(FTP) auth-sec-prof(password)