The memo from Eurocopier Malaysia reminds dealers of the proper steps to take before dismantling the PCB board for certain copier models, including turning off the copier using the power button, ensuring the power lamp is off, unplugging the power cable, pressing the power button again to remove current from the PCB, and not using a power extension, in order to prevent malfunctions to the main controller board and power supply.
The memo from Eurocopier Malaysia reminds dealers of the proper steps to take before dismantling the PCB board for certain copier models, including turning off the copier using the power button, ensuring the power lamp is off, unplugging the power cable, pressing the power button again to remove current from the PCB, and not using a power extension, in order to prevent malfunctions to the main controller board and power supply.
The memo from Eurocopier Malaysia reminds dealers of the proper steps to take before dismantling the PCB board for certain copier models, including turning off the copier using the power button, ensuring the power lamp is off, unplugging the power cable, pressing the power button again to remove current from the PCB, and not using a power extension, in order to prevent malfunctions to the main controller board and power supply.
Refer to the above matter, our company would like to ADVISE & REMIND all the dealer that mandatory to PROPERLY turn OFF the copier machine BEFORE dismantle the PCB by following this step.
Press the power button to turn OFF power.
Make sure power lamp are completely turn OFF (Blue light at Panel). Unplug power cable from Copier Machine. Press the power button again to remove the current/electricity from PCB.\ All this step is mandatory for model MPC3003/3503/4503/5503 and above.
Meanwhile, please DO NOT USE POWER EXTENSION to power up the
copier. This enforcement is to prevent the malfunction of main controller board & power supply due to the current instability.