Professional Documents
Culture Documents
Version: 1.0
www.ABRITES.com
1. Introduction
2. Using the Abrites Engine Control Unit Programming tool.
I. Introduction
The Abrites engine control unit programming tool will allow you to select the
brand you are working on. Then select the ECU type.
You can then select the option to read depending on what is available:
When you press connect you will initiate communication with the
Engine Control Unit and read the ECU password if available:
After ensuring that you can read the ECU you can go ahead and see the
functionality available. Here you can see the reading of the ECU
password:
Once this is done we can go ahead and save the EEPROM(DATA FLASH) to a File.
We can read the internal/external flash(PROGRAM FLASH) as well. Also save them
to a file for later use.
We can easily read and write the EEPROM(DATA FLASH), internal flash/
external flash(PROGRAM FLASH), save them and keep them for later use. We
can also easily write them to other ECUs as a helpful tool for replacement. This
is great for mechanical and electronic workshops, engine tuners and
locksmiths.
FULL BOOT MODE SOLUTION FOR ALL AVAILABLE BRANDS
- Our new ECU tool incorporates all our BOOT MODE reading, writing and
updating in one tool under one software.
- The new ECU Programming Tool includes ECUs from the following brands:
-BMW - BOSCH
-ISUZU - BOSCH
-KIA/ HYUNDAI -BOSCH, CONTINENTAL, DELPHI, KEFICO
-MERCEDES - BOSCH, CONTINENTAL, DELPHI
-MINI - BOSCH
-PORSCHE - BOSCH
-PEUGEOT/ CITROEN - BOSCH
-RENAULT - BOSCH
-VAG - BOSCH
- The new tool works perfectly with the help of the ZN051 Distribution box.