Professional Documents
Culture Documents
2 Type testtest
The type test defined in 3.9 shall be made on one or more
specimens of the tariff and load control equipment, selected by the
manufacturer, to establish its specific characteristics and to prove
its conformity with the requirements of this standard.
Acceptance tests
F.1 General
The acceptance tests shall be carried out by the user or the
supplier either as a 100 % test or as a sample test, as desired.
In a delivery batch of less than 50 tariff and load control equipment
a 100 % test is preferable.
For sample tests, delivery batches of more than 1 200 tariff and
load control equipment shall be subdivided into part batches of no
more than 1 200 equipment each.
Acceptance tests shall comprise