Professional Documents
Culture Documents
• Single application
• Water based
TECHNICAL DATA
O2P DIRECTION OF USE
Curing compund
TYPE pigmented
The compound should be spray applied as evenly as
Color Milky white liquid possible on to the freshly placed concrete.
Finished film appearance White, tack free,
For horizontal surfaces ROCK CURE-O2P should be
water repellent film applied as soon as the initial surface sheen has
disappeared from the concrete surface. In the case of
Water retention ASTM C156 Passed
formed concrete, it should be applied immediately on
removal of the formwork. To assist breakdown of film
Coverage 5-6 square meter per liter
on vertical and formed surfaces, it is essential to
Specific gravity 0.94 @ 25 °C dampen down the concrete with clean water prior to
application.
Flash point Not applicable
Drying time ASTM C 309 Less than four hour FILM BREAKDOWN:
The information provided in this leaflet, is supplied by our consulting service and is the end result of exhaustive research work and extensive experience. They are, however, without
liability on our part, in particular with regard to third parties proprietary rights, and do not relieve the user of the responsibility for verifying that theproducts and processes are suitable
for the intended application. The data presented was derived from tests under normal climate conditions according to DIN 50014 and mean average values and analysis. Deviations
are possible when delivery takes place. Given that recommendations may differ from those shown in this leaflet written confirmation should be sought. It is the responsibility of the
purchaser to ensure they have the latest leaflet issue and that its contents are current. Our customer service staff will be glad to provide assistance at any time. We appreciate the
interest you have shown in our products. This technical data sheet supercedes pre viously issued information.