Professional Documents
Culture Documents
555 Product Guide PDF
555 Product Guide PDF
product
guide
features contents
• 136 mton (150 ton) Capacity Specifications 3
• 539 mton-m (3,900 ft-kips)
Maximum Load Moment
www.manitowoccranegroup.com
model 555
2
notes
specifications
Upperworks
Each function is equipped with relief valves to protect the
hydraulic circuit from overload or shock.
Engine System includes oil cooler and replaceable, full flow filter.
3
All oil is filtered before entering the hydraulic pumps.
Cummins Model QSL T3 diesel, 6 cylinder, 253 kW
(340 BHP) @ 1800 governed RPM.
Hydraulic system also includes pump transmission
disconnect and hydraulic oil cooler.
Includes engine block heater, disconnect clutch for cold
weather starting, high silencing muffler, hydraulic oil
cooler, radiator and fan.
Drums
Multiple hydraulic pump drive transmission provides
power for all machine functions. Two equal width drums, 676 mm (26-5/8") wide and 539
mm (21-1/4") diameter are driven by independent
Two 12 volt maintenance-free batteries, 1300 CCA at - variable displacement axial piston hydraulic motors
18°C (0° F), 24 volt system and 100 amp alternator. through planetary reduction mounted on separate front
and rear shafts with anti-friction bearings. Drums are
One diesel fuel tank, 586 l (155 gal.), with level indicator grooved for 28 mm wire rope.
in operator’s cab.
Powered hoisting/lowering operation is standard with
automatic (spring applied, hydraulically released) multi-
Optional: Cold-weather package with heater for disc brakes, and drum rotation indicators..
fluids, and computer display.
Optional: free-fall operation for front and/or rear
drum(s). Wet disc brake manually applies by foot pedal
with locking latch in operator’s cab. Operator may select
Controls free-fall or powered lowering mode using a selector switch.
Modulating electronic-over-hydraulic controls provide
Optional: auxiliary (third) hydraulic powered drum
infinite speed response directly proportional to control
rated 147 kN (33,000 lb) line pull mounted in boom
lever movement. Controls include Manitowoc's exclusive
butt. Includes third drum control system.
EPIC® Electronically Processed Independent Control system
with CAN-BUS technology providing microprocessor
Optional: auxiliary (third) hydraulic powered drum
driven control logic, pump control, on-board diagnostics,
rated 89 kN (20,000 lb) line pull mounted in boom butt.
and service information.
Includes third drum control system.
Travel and swing alarms are standard.
Optional: auxiliary drum preparation includes
electric wiring, controls, hydraulic pump and plumbing.
Block-up limit control is standard for hoist and whip lines.
Fully enclosed and insulated steel module mounted at left Powered boom hinge system including cylinder, piping,
front corner of rotating bed on a pivoting frame that operating controls, and locking device standard.
permits cab to be repositioned for transportation.
Module is equipped with sliding door, large safety glass Luffing jib preparation included as standard.
windows on all sides and roof. Signal horn, cab space
heater, front and roof windshield wipers, dome light, sun Optional 3,0 m (10'), 6,1 m (20'), and 12,2 m (40')
visor and shade, fire extinguisher, air conditioning, and No. 84 boom inserts with steel boom suspension straps
radio are standard. and FACT connection system.
Optional: Nylon protective window covers. Utilize main boom inserts in combination with No. 84
specifications
basic main boom for total length up to 76,2 m (250').
Utilize fixed jib inserts in combination with the No. 138A
Optional No. 84 detachable upper boom point with basic fixed jib extension for a total length up to 18,3 m
one 76,2 cm (30") diameter tapered roller bearing steel
sheave grooved for 28 mm rope with rope guard for
(60'). 5
liftcrane.
Optional Equipment
Optional open throat top No. 84 - 38' with FACT
Optional: Blocks and Hooks, each with roller-
connection system.
bearing sheaves for 28 mm wire rope, a roller-bearing
swivel hook, a hook latch and a swivel lock.
No. 134 Fixed Jib 13,6 mton (15 ton) swivel hook and weight ball
Optional No. 134 basic fixed jib 9,1 m (30') length 27,2 mton (30 ton) hook block with single roller
consisting of 4,6 m (15') jib butt and 4,6 m (15') jib top bearing sheave and roller bearing swivel hook with hook
with 3,7 m (12') jib strut, pendants, and backstay. latch and swivel lock (assembly block)
Includes LMI hardware. For use with No. 84 boom.
90,7 mton (100 ton) hook block with three roller
Optional No. 134 fixed jib inserts 3,0 m (10') and bearing sheaves and roller bearing swivel hook with hook
6,1 m (20') with pendants. latch and swivel lock
Utilize fixed jib inserts in combination with the No. 134 136 mton (150 ton) hook block with four roller
basic fixed jib for total lengths of to 24,4 m (80'). bearing sheaves and roller bearing swivel hook with hook
latch and swivel lock
Note: Jib lengths greater than 18,3 m (60') require the use
of at least one 6,1 m (20') No. 134 fixed jib insert. Optional: Hydraulic Test Kit: required to properly
analyze the performance of the EPIC® control system.
No. 155 Luffing Jib Optional: Service Interval Kits for the regularly
scheduled maintenance of general crane operations.
Optional 18,3 m (60') basic No. 155 luffing jib
assembly with LMI hardware consisting of 8,2 m (27') jib Optional: Lighting Packages: consult dealer for
butt, 3,0 m (10') insert, and 7,0 m (23') jib top with two available options.
68,6 cm (27") straight roller bearing sheaves, boom cap
with 5,6 m (18.5') fixed strut and 5,6 m (18.5') jib strut, Optional: Special Paint [color(s) other than
pin connected boom sections, pendant rigging, backstay Manitowoc standard red and black].
pendants, jib point wheel, and 28 mm luffing jib hoist line.
Optional: Custom vinyl decal(s) of customer name
Optional 3,0 m (10'), 6,1 m (20'), and 12,2 m (40') and/or logo from artwork supplied by customer.
No. 155 luffing jib inserts with pendant suspension.
Optional: Export Packaging: basic crane, boom and
Optional 12,2 m (40') insert with intermediate fall jib sections.
and pendant suspension.
6,99 m
(22' 11")
6 MAST TAILSWING
ROTATION
10,85 m 8,46m
(35' 7") (27' 9")
BOOM HINGE
3,60 m
(11' 10")
4,97 m
(16' 4")
2,95 m
(9' 8")
4,03 m
(13' 3") 3,19 m 3,60 m 1,05 m 3,56 m
model 555
Crawlers x2
Length 7,32 m 24' 1"
H Width 2,29 m 7' 6"
Height 1,25 m 4' 1"
Weight 14 619 kg 32,230 lb
L
Note: Width is based on platform in stowed position. Crawler
is 1,20 m (3' 11").
Counterweight Tray x1
Length 4,98 m 16' 4"
H Width 1,45 m 4' 9"
Height 0,51 m 1' 8"
L Weight 7 801 kg 17,200 lb
Carbody Counterweight x1
Length 1,90 m 6' 3"
H Width 1,57 m 5' 2"
Height 0,72 m 2' 4"
L Weight 9 979 kg 22,000 lb
Upper Counterweight
model 555
H Series 1 x4
Series 2 x6
L Length 1,35 m 4' 5"
Width 1,12 m 3' 8"
Height 0,97 m 3' 2"
Weight 6 123 kg 13,500 lb
Option
outline dimensions
No. 84 Boom Butt 6,7 m (22') &
Wire Rope Guide, Boom Stop x 1
H
8 Length
Width
6,81 m
2,05 m
22' 4"
6' 9"
Height 2,01 m 6' 7"
L Weight 2 680 kg 5,935 lb
Note: Includes boom butt support for self-erect option and
boom angle indicator.
Option
outline dimensions
No. 84 Boom Open Throat Top
H 11,6 m (38') & Wire Rope Guide,
L
Straps
Length
x1
12,34 m 40' 6"
9
Width 2,08 m 6' 10"
Height 2,39 m 7' 10"
Weight 3 347 kg 7,378 lb
Note: Wire rope guide shown in shipping position.
Option
outline dimensions
No. 155 Luffing Jib 00,0m (00')
Boom Cap, Butt, Struts, Guides,
10 Straps, Pendants
Length
x1
10,80 m 35' 5"
H Width 2,08 m 6' 10"
Height 3,05 m 10' 0"
Weight 4 754 kg 10,480 lb
L
Note: Shown in shipping position.
Option
outline dimensions
H
No. 138A Jib Butt 4,6 m (15')
& Strut, Stop x1
L Length
Width
5,64 m
0,79 m
18' 6"
2' 7"
11
Height 0,94 m 3' 1"
Weight 392 kg 871 lb
W
Self Assembly Hook block for 28 mm or (1-1/4") wire rope
Capacity 27 mt 30 t Length 1,17 m 3' 10"
L Weight 680 kg 1,500 lb Width 0,64 m 2' 1" model 555
D Weight Ball
Capacity/Swivel 13,6 mt 15 t Diameter 0,56 m 1' 10"
L Weight 594 kg 1 310 lb Length 1,07 m 3' 6"
Option
transport data
Trailer Load Out Summary
Model 555 Series 2
No. 84 514 1
Upper Boom Point (1,135)
(35,895)
(35,895)
(34,665)
(40,630)
(26,510)
(36,410)
(83,140)
(41,610)
37 665
15 620
18 770
18 426
16 179
16 179
12 019
17 212
Approximate Total
Shipping Weight kg (lb)
13
model 555
performance data
Wire Rope Lengths
Boom No. 84
14 - or -
Open Throat Top on Boom No. 84
- or -
Fixed Jib No. 134 on Boom No. 84
Whip Line Hoist line
NOTE: Line lengths given in table will allow hook to touch ground. When block travel below
ground is required, add additional rope equal to parts of line times added travel distance. Hoisting
model 555
distance or line pull may be limited when block travel below ground is required.
Front and rear drums each provide 147 kN (33,000 lb) maximum single line pull.
Auxiliary drum provides 89 kN (20,000 lb) maximum single line pull.
36,6 (120) 168 (550) 130 (425) 82 (270) 36,6 (120) 168 (550) 130 (425)
39,6 (130) 183 (600) 137 (450) 88 (290) 39,6 (130) 183 (600) 137 (450)
42,7 (140) 191 (625) 145 (475) 95 (310) 42,7 (140) 191 (625) 145 (475)
45,7 (150) 206 (675) 160 (525) 101 (330) 45,7 (150) 206 (675) 160 (525)
48,8 (160) 213 (700) 168 (550) 107 (350) 48,8 (160) 213 (700) 168 (550)
51,8 (170) 221 (725) 175 (575) 113 (370) 51,8 (170) 221 (725) 175 (575) 91 (300)
54,9 (180) 236 (775) 183 (600) 119 (390) 54,9 (180) 236 (775) 183 (600) 98 (320)
57,9 (190) 244 (800) 191 (625) 125 (410) 57,9 (190) 244 (800) 191 (625) 104 (340)
61,0 (200) 259 (850) 198 (650) 131 (430) 61,0 (200) 259 (850) 198 (650) 110 (360)
64,0 (210) 274 (900) 206 (675) 137 (450) 64,0 (210) 274 (900) 206 (675) 116 (380)
67,1 (220) – – 213 (700) 143 (470) 67,1 (220) 282 (925) 213 (700) 122 (400)
70,1 (230) – – 229 (750) 149 (490) 70,1 (230) 297 (975) 229 (750) 128 (420)
73,2 (240) – – 236 (775) 155 (510) 73,2 (240) 305 (1000) 236 (775) 134 (440)
76,2 (250) – – 244 (800) 162 (530) 76,2 (250) 320 (1050) 244 (800) 140 (460)
79,2 (260) – – 251 (825) 168 (550) 79,2 (260) 335 (1100) 251 (825) 146 (480)
82,3 (270) – – 259 (850) 174 (570) 82,3 (270) 343 (1125) 259 (850) 152 (500)
85,3 (280) – – 267 (875) 180 (590) 85,3 (280) 358 (1175) 267 (875) 158 (520)
88,4 (290) – – 282 (925) 186 (610) 88,4 (290) – – 282 (925) 158 (520)
91,4 (300) – – 290 (950) 192 (630) 91,4 (300) – – 290 (950) 158 (520)
94,5 (310) – – – – 198 (650) 94,5 (310) – – 297 (975) 158 (520)
97,5 (320) – – – – 204 (670) 97,5 (320) – – 305 (1000) 158 (520)
Note: Hoist line lengths given in table will allow hook to touch ground. When Note: Hoist line lengths given in table will allow hook to touch ground. When
block travel below ground is required, add additional rope equal to parts of line block travel below ground is required, add additional rope equal to parts of line
times added travel distance. Hoisting distance or line pull may be limited when times added travel distance. Hoisting distance or line pull may be limited when
block travel below ground is required. block travel below ground is required.
model 555
performance data
Wire Rope Lengths Wire Rope Specifications 5:1 Safety Factor
Fixed Jib No. 138A on Boom No. 84
Luffing Jib No. 155 on - or -
16 Boom No. 84
Fixed Jib Whip Line
Fixed Jib No. 134 on Boom No. 84
Boom Hoist Drum 221 m (725 ft) Maximum Length – Unassisted Raising
22 mm (7/8") Wire Rope 8 Layers No. 84 Boom with Heavy-Lift Top - or -
No. 134 Fixed Jib on
*5 m (18') is deducted from maximum spooling capacities No. 84 Boom with Heavy-Lift Top
for 3 dead wraps per drum or lagging. Series 2
Main Fixed
Boom Jib
Maximum Length – Unassisted Raising 76,2 –
model 555
Jack-Knife Procedure
No. 155 Luffing Jib on No. 84 Main Boom
Jack-Knife Procedure
17
Without Intermediate Fall With Intermediate Fall
Main Luffing Main Luffing
Method Boom Jib Method Boom Jib
39,6 18,3 - 33,5 NOTE: Load block(s), hook(s) and weight ball(s) on ground until boom
(130) (60 - 110) and luffing jib are erected.
Working Weight
kg (lb)
Configuration Series 1 Series 2
6 803) 77 83 89 95 97 99 6 803) 95 98 98
(15,000) (251) (273) (293) (313) (318) (323) (15,000) (310) (320) (320)
9 072) 72 74 75 77 79 80 9 072) 73 76 82
(20,000) (236) (241) (247) (252) (258) (263) (20,000) (240) (250) (270)
13 380) 51 52 54 55 57 59
(33,000) (165) (170) (176) (181) (186) (192)
Basic Lifcrane
Closing
Clalmshell
* Maximum wire rope dimeter and width a wond on drum must not exceed drum groove pitch.
20 Boom Length
m (ft)
Boom Inserts
3,0 m 6,1 m 12,2 m
(10 ft) (20 ft) (40 ft) Jib Length
Fixed Jib Inserts
3,0 m 6,1 m
m (ft) (10 ft) (20 ft)
15,2 (50) – – –
9,1 (30) – –
18,3 (60) 1 – –
12,2 (40) 1 –
21,3 (70) – 1 –
15,2 (50) – 1
24,4 (80) 1 1 –
18,3 (60) 1 1
27,4 (90) – – 1
21,3 (70) – 2
30,5 (100) 1 – 1
24,4 (80) 1 2
33,5 (110) – 1 1
36,6 (120) 1 1 1
39,6 (130) – – 2
42,7 (140) 1 – 2
45,7 (150) – 1 2
54,9 (180) 1 – 3
6,1 m (20 ft)
57,9 (190) – 1 3 8,5 m (28 ft) No. 134 Jib Inserts
No. 84 Boom Top
61,0 (200) 1 1 3 No. 134
Fixed Jib 3,0 m (10 ft)
64,0 (210) – – 4 No. 134 Jib Insert
24,4 m (80 ft)
67,1 (220) 1 – 4
4,6 m (15 ft)
70,1 (230) – 1 4 No. 134 Jib Butt
12,2 m (40 ft)
No. 84 Boom Insert
73,2 (240) 1 1 4
Model 555
Model 555
No. 134 Fixed Jib on
No. 84 Heavy-Lift Main Boom
No. 84 Heavy-Lift Main Boom
76,2 m (250 ft)
85,3 m (280 ft)
boom combinations
No. 84 OTT No. 134 Fixed Jib
Boom Combinations Combinations
Boom Length
m (ft)
Boom Inserts
3,0 m 6,1 m 12,2 m
(10 ft) (20 ft) (40 ft) Jib Length
Fixed Jib Inserts
3,0 m 6,1 m
21
m (ft) (10 ft) (20 ft)
18,3 (60) – – –
9,1 (30) – –
21,3 (70) 1 – –
12,2 (40) 1 –
24,4 (80) – 1 –
15,2 (50) – 1
27,4 (90) 1 1 –
18,3 (60) 1 1
30,5 (100) – – 1
21,3 (70) – 2
33,5 (110) 1 – 1
24,4 (80) 1 2
36,6 (120) – 1 1
39,6 (130) 1 1 1
42,7 (140) – – 2
45,7 (150) 1 – 2
48,8 (160) – 1 2
4,6 m (15 ft)
51,8 (170) 1 1 2 No. 134 Jib Top
54,9 (180) – – 3
57,9 (190) 1 – 3
6,1 m (20 ft)
61,0 (200) – 1 3 No. 134 Jib Inserts
No. 134
64,0 (210) 1 1 3 Fixed Jib
8,5 m (28 ft) 24,4 m (80 ft)
No. 84 OTT Boom Top 3,0 m (10 ft)
67,1 (220) – – 4
No. 134 Jib Insert
70,1 (230) 1 – 4
4,6 m (15 ft)
73,2 (240) – 1 4 No. 134 Jib Butt
Model 555
Model 555
No. 134 Fixed Jib on
No. 84 OTT Main Boom
No. 84 OTT Main Boom
76,2 m (250 ft)
85,3 m (280 ft)
boom combinations
No. 155 Luffing Jib No. 138A Fixed Jib
Combinations Combinations
4,6 m (15 ft)
22 Jib Length
m (ft)
Luffing Jib Inserts
3,0 m 6,1 m 12,2 m
(10 ft) (20 ft) (40 ft)
Jib Length
m (ft)
Fixed Jib Inserts
3,0 m
No. 138A Jib Top
(10 ft)
18,3 (60) 1 – – 9,1 (30) –
21,3 (70) – 1 – 12,2 (40) 1 No. 138A Fixed Jib
18,3 m (60 ft) 3,0 m (10 ft)
24,4 (80) 1 1 – 15,2 (50) 2 No. 138A Jib Insert
27,4 (90) – – 1 18,3 (60) 3
4,6 m (15 ft)
30,5 (100) 1 – 1 No. 138A Jib Butt
33,5 (110) – 1 1
42,7 (140) 1 – 2
12,2 m (40 ft)
45,7 (150) – 1 2 No. 155 Jib Insert
12,2 m (40 ft)
48,8 (160) 1 1 2 No. 555 Jib Insert
(260) 79,2
83 0
80 0 23
(250) 76,2 70 0
76,2
(250
)
(240) 73,2 73,2
(240
)
(230) 70,1 60 0
70,1
(230
)
(220) 67,1 67,1
(220
)
(210) 64,0 64,0
(210)
50 0
(200) 61,0 61,0
(200
)
51,8
(170) 51,8
HEIGHT ABOVE GROUND m (ft)
(170)
48,8 40 0
(160) 48,8 (160)
45,7
(150) 45,7 (150)
42,7
(140) 42,7 (140)
39,6
(130) 39,6 (130)
36,6
(120) 36,6 (120)
33,5 30 0
(110) 33,5 (110)
30,5
(100)
(100) 30,5
27,4
(90)
(90) 27,4
24,4
(80)
(80) 24,4 20 0
21,3
(70)
(70) 21,3
18,3
(60)
(60) 18,3
15,2
(50)
(50) 15,2
(40) 12,2
(30) 9,1
model 555
5,50 m 1,52 m 12,2 18,3 24,4 30,5 36,6 42,7 48,8 54,9 61,0
(18' 1") (5' 0") (40) (60) (80) (100) (120) (140) (160) (180) (200)
TAILSWING 1,85 m DISTANCE FROM CENTERLINE OF ROTATION m (ft)
(6' 1")
ROTATION
heavy-lift load charts
Liftcrane Boom Capacities - Series 2
Boom No. 84
24 44 678 kg (98,500 lb) Upperworks Counterweight
360° Rating
19 958 kg (44,000 lb) Carbody Counterweight
kg (lb) x 1 000
Boom 15,2 18,3 21,3 27,4 33,5 39,6 45,7 51,8 57,9 64,0 70,1 76,2
m (ft) (50.0) (60) (70) (90) (110) (130) (150) (170) (190) (210) (230) (250)
Radius
4,6 136,0 135,6
(15) (300.0) (299.0)
24,0 15,0 15,0 14,9 14,7 14,4 14,3 14,0 13,7 13,4
Deduct 590 kg (1,300 lb) from (32.5) (32.5) (32.2) (31.8) (31.2) (30.8) (30.2) (29.6) (28.9)
(80)
capacities when upper boom point
is attached. 26,0 13,3 13,4 13,2 13,0 12,8 12,6 12,3 12,0 11,8
(90) (27.2) (27.3) (27.0) (26.6) (26.0) (25.5) (24.9) (24.3) (23.7)
Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
heavy-lift boom range diagram
No. 84 OTT Boom
25
model 555
heavy-lift load charts
Liftcrane Boom Capacities - Series 2
Boom No. 84 OTT
26 44 678 kg (98,500 lb) Upperworks Counterweight
360° Rating
19 958 kg (44,000 lb) Carbody Counterweight
kg (lb) x 1 000
Boom 18,3 21,3 24,4 30,5 36,6 42,7 45,7 51,8 57,9 64,0 70,1 76,2
m (ft) (60.0) (70) (80) (100) (120) (140) (150) (170) (190) (210) (230) (250)
Radius
4,3 136,0
(14) (300.0)
26,0 13,6 13,5 13,3 13,2 12,9 12,7 12,4 12,1 11,9
Deduct 590 kg (1,300 lb) from (27.8) (27.6) (27.1) (27.0) (26.4) (25.9) (25.2) (24.6) (24.0)
(90)
capacities when upper boom
point is attached. 30,0 10,9 10,9 10,7 10,6 10,4 10,1 9,8 9,5 9,2
(100) (23.6) (23.5) (23.0) (22.9) (22.4) (21.8) (21.2) (20.5) (19.9)
58,0 2,0
(195) (4.1)
Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
fixed jib range diagram
No. 134 Fixed Jib on No. 84 Main Boom
(290) 88,4
80 0 27
(280) 85,3
70 0
(270) 82,3
24
(80 ,4 85
(260) 79,2 ) (28 ,3
0)
21
(70 ,3 82
60 0
) (27 ,3
(250) 76,2 18 0)
(60 ,3
) 79
15 (26 ,2
(240) 73,2 0)
(50 ,2
) 76
12 (25 ,2
(40 ,2 0)
(230) 70,1 )
73 50 0
9
(30 ,1 (24 ,2
0)
(220) 67,1 )
70
(23 ,1
0)
(210) 64,0 67
(22 ,1
0)
(200) 61,0 64
(21 ,0
0)
(190) 57,9 61
(20 ,0
0)
57 40 0
(180) 54,9 (19 ,9
0)
HEIGHT ABOVE GROUND m (ft)
54
(170) 51,8 (18 ,9
0)
51
(160) 48,8 (17 ,8
0)
48
(16 ,8
(150) 45,7 0)
45
(15 ,7
(140) 42,7 0)
42
(14 ,7
0)
(130) 39,6
39 30 0
(13 ,6
0)
(120) 36,6 36
(12 ,6
0)
(110) 33,5
(100) 30,5
(90) 27,4
(80) 24,4
(70) 21,3
(60) 18,3
(50) 15,2
(40) 12,2
(30) 9,1
model 555
5,50 m 1,52 m 12,2 18,3 24,4 30,5 36,6 42,7 48,8 54,9 61,0 67,1
(18' 1") (5' 0") (40) (60) (80) (100) (120) (140) (160) (180) (200) (220)
TAILSWING 1,85 m DISTANCE FROM CENTERLINE OF ROTATION m (ft)
(6' 1")
ROTATION
fixed jib load charts
Liftcrane Boom Capacities - Series 2
Fixed Jib No. 134 with 3 810 mm (12' 6") strut on Boom No. 84
28 44 678 kg (98,500 lb) Upperworks Counterweight
360° Rating
19 958 kg (44,000 lb) Carbody Counterweight
kg (lb) x 1 000
5˚ Offset 25˚ Offset
Boom 27,4 36,6 48,8 57,9 67,1 Boom 27,4 36,6 48,8 57,9 67,1
m (ft) (90) (120) (160) (190) (220) m (ft) (90) (120) (160) (190) (220)
Radius Radius
9,1 26,7 – –
(30) (59.0) (40) (46.7)
21,0
12,0 26,7 26,7 – 14,0 19,7 (44.8) –
(40) (59.0) (59.0) (59.0) (50) (41.8) (47.7)
18,8
14,0 26,7 26,7 26,7 26,7 – 18,0 17,3 (41.2) 20,2 21,0 –
(50) (58.7) (59.0) (59.0) (59.0) (46.3) (60) (38.0) (44.4) (46.2) (40.9)
17,9
18,0 23,1 22,7 22,1 21,7 20,5 20,0 16,4 (38.3) 19,3 19,5 18,3
(60) (49.5) (48.8) (47.6) (46.7) (45.3) (70) (35.0) (39.7) (39.0) (38.3)
Jib 9,1 m (30 ft)
Boom 27,4 36,6 48,8 57,9 64,0 Boom 27,4 36,6 48,8 57,9 64,0
m (ft) (90) (120) (160) (190) (210) m (ft) (90) (120) (160) (190) (210)
Radius Radius
9,1 –
(30) (40)
18,0 16,6 17,4 18,1 18,6 18,7 20,0 12,1 12,8 13,1 – –
(60) (36.6) (38.2) (39.9) (40.9) (41.3) (70) (25.8) (27.6) (28.8) (28.9) (27.9)
Jib 15,2 m (50 ft)
24,0 15,1 15,4 14,7 14,3 14,0 24,0 10,9 11,7 12,6 12,7 12,2
(80) (33.3) (33.1) (31.8) (30.9) (30.2) (80) (23.9) (25.7) (27.6) (27.9) (27.0)
28,0 12,6 12,2 11,6 11,2 10,9 28,0 9,9 10,8 11,7 12,0 11,7
(100) (24.6) (23.7) (22.4) (21.4) (20.7) (100) (20.9) (22.8) (24.2) (23.5) (22.9)
36,0 8,6 8,2 7,6 7,1 6,8 36,0 8,6 8,2 7,8 7,6
(120) (18.5) (17.7) (16.3) (15.3) (14.6) (120) (18.6) (17.7) (16.9) (16.4)
model 555
40,0 7,1 6,8 6,2 5,7 5,4 40,0 7,2 6,7 6,4 6,1
(140) – (13.4) (12.1) (11.1) (10.4) (140) (14.0) (13.1) (12.3) (11.7)
Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
fixed jib load charts
Liftcrane Boom Capacities - Series 2
Fixed Jib No. 134 with 3 810 mm (12' 6") strut on Boom No. 84
44 678 kg (98,500 lb) Upperworks Counterweight
360° Rating
19 958 kg (44,000 lb) Carbody Counterweight
kg (lb) x 1 000
29
5˚ Offset 25˚ Offset
Boom 27,4 36,6 48,8 57,9 64,0 Boom 27,4 36,6 48,8 57,9 64,0
m (ft) (90) (120) (160) (190) (210) m (ft) (90) (120) (160) (190) (210)
Radius Radius
10,7 13,6 18,0 –
(35) (30.0) (60) (23.9)
10,8
14,0 13,5 13,6 ––– 20,0 10,5 (23.5) –
(50) (29.7) (30.0) (30.0) (70) (22.9) (24.1)
10,3
18,0 12,8 13,3 13,6 13,6 13,6 24,0 9,6 (22.7) 10,6 10,7 10,7
(60) (28.2) (29.4) (30.0) (30.0) (30.0) (80) (21.0) (23.4) (23.5) (22.7)
9,8
20,0 12,4 13,0 13,5 13,6 13,6 26,0 9,0 (21.0) 10,4 10,4 10,4
(70) (26.8) (28.2) (29.5) (30.0) (30.0) (90) (19.3) (22.8) (22.7) (22.0)
Jib 18,3 m (60 ft)
40,0 7,3 6,9 6,3 5,9 5,5 48,0 4,7 4,3 4,3
(140) (14.5) (13.7) (12.3) (11.3) (10.6) (160) (10.0) (9.2) (8.7)
Boom 27,4 36,6 48,8 57,9 61,0 Boom 27,4 36,6 48,8 57,9 61,0
m (ft) (90) (120) (160) (190) (200) m (ft) (90) (120) (160) (190) (200)
Radius Radius
10,7 18,0
(35) (60)
20,0 8,9 9,0 9,1 9,2 9,2 26,0 6,9 7,1 7,3 7,4 7,5
(70) (19.2) (19.9) (20.1) (20.3) (20.3) (90) (15.0) (15.5) (16.0) (16.3) (16.4)
Jib 24,4 m (80 ft)
24,0 8,3 8,8 9,0 9,1 9,1 28,0 6,7 6,9 7,2 7,3 7,4
(80) (18.2) (19.3) (19.9) (20.1) (20.1) (100) (14.2) (14.9) (15.5) (15.9) (16.0)
28,0 7,7 8,2 8,8 9,0 9,0 36,0 5,5 6,1 6,6 6,8 6,8
(100) (16.4) (17.7) (18.9) (19.6) (19.8) (120) (12.2) (13.4) (14.6) (15.0) (15.1)
36,0 6,8 7,3 7,8 7,3 7,2 40,0 5,1 5,6 6,3 6,6 6,6
(120) (14.9) (16.2) (16.8) (15.7) (15.4) (140) (10.7) (11.9) (13.3) (13.4) (13.1)
model 555
40,0 6,4 6,9 6,4 5,9 5,8 48,0 4,9 5,0 4,6 4,5
(140) (13.6) (14.0) (12.5) (11.5) (11.1) (160) (10.7) (10.7) (9.9) (9.6)
48,0 5,5 5,0 4,4 3,9 3,7 52,0 4,6 4,1 3,8 3,6
(160) (11.8) (10.8) (9.4) (8.3) (8.0) (180) – (8.0) (7.2) (6.9)
Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
luffing jib range diagram
No. 155 Luffing Jib on No. 84 Main Boom
30
model 555
luffing jib load charts
Liftcrane Luffing Jib Capacities - Series 2
Luffing Jib No. 155 on Boom No. 84
44 680 kg (98,500 lb) Counterweight
360° Rating
19 960 kg (44,000 lb) Carbody Counterweight
kg (lb) x 1 000
31
88˚ Boom Angle
Boom 18,3 24,4 30,5 42,7 51,8 Boom 18,3 24,4 30,5 42,7 51,8
m (ft) (60) (80) (100) (140) (170) m (ft) (60) (80) (100) (140) (170)
Radius Radius
10,0 – – – 10,0 – – –
(35) (90.0) (90.0) (88.1) (35) (78.2) (77.0) (75.0)
(( 87
12,0 38,2 37,0 35,9 – – 12,0 33,7 33,4 32,8 –
Luffing Jib Length 18,3 m (60 ft)
Boom 18,3 24,4 30,5 42,7 51,8 Boom 18,3 24,4 30,5 42,7 51,8
m (ft) (60) (80) (100) (140) (170) m (ft) (60) (80) (100) (140) (170)
Radius Radius
12,0 – – –– – 12,0 ––
(40) (56.1) (55.3) (54.2) (48.5) (40)
18,0 20,9 20,8 20,7 19,3 18,0 13,4 13,3 13,3 12,4 10,9
(60) (45.7) (45.6) (45.3) (42.2) (60) (29.3) (29.2) (29.1) (27.3) (24.0)
20,0 19,5 19,5 19,5 18,0 20,0 12,4 12,4 12,4 12,1 10,6
(70) (41.3) (41.4) (41.3) (38.0) (70) (26.2) (26.3) (26.2) (25.9) (23.3)
24,0 17,1 17,2 17,1 15,7 24,0 10,8 10,8 10,8 10,7 10,2
(80) (37.1) (37.5) (37.4) (34.3) (80) (23.5) (23.6) (23.6) (23.5) (22.5)
30,0 12,7 13,0 12,9 12,9 30,0 8,6 8,7 8,8 8,8 8,8
(100) (27.5) (28.1) (28.0) (27.9) (100) (18.8) (18.9) (19.1) (19.2) (19.1)
36,0 8,4 9,6 10,1 10,1 36,0 6,9 7,0 7,0 7,2 7,2
model 555
(120) (17.4) (19.8) (21.9) (21.9) (120) (15.1) (15.2) (15.3) (15.6) (15.7)
– – – – –
(170) (170) (7.1) (9.2) (9.5)
Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
luffing jib load charts
Liftcrane Luffing Jib Capacities - Series 2
Luffing Jib No. 155 on Boom No. 84
32 44 680 kg (98,500 lb) Counterweight
360° Rating
19 960 kg (44,000 lb) Carbody Counterweight
kg (lb) x 1 000
Boom 18,3 24,4 30,5 42,7 51,8 Boom 18,3 24,4 30,5 42,7 51,8
m (ft) (60) (80) (100) (140) (170) m (ft) (60) (80) (100) (140) (170)
Radius Radius
14,0 – 14,0
(50) (64.9) (50)
(( 87
18,0 23,8 23,3 – 18,0
Luffing Jib Length 18,3 m (60 ft)
Boom 18,3 24,4 30,5 42,7 51,8 Boom 18,3 24,4 30,5 42,7 51,8
m (ft) (60) (80) (100) (140) (170) m (ft) (60) (80) (100) (140) (170)
Radius Radius
– – – – – ––
(85) (31.8) (30.9) (85)
58,0 58,0 –
(190) (190) (8.2)
Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
luffing jib load charts
Liftcrane Luffing Jib Capacities - Series 2
Luffing Jib No. 155 on Boom No. 84
44 680 kg (98,500 lb) Counterweight
360° Rating
19 960 kg (44,000 lb) Carbody Counterweight
kg (lb) x 1 000
33
65˚ Boom Angle
Boom 18,3 24,4 30,5 42,7 51,8 Boom 18,3 24,4 30,5 42,7 51,8
m (ft) (60) (80) (100) (140) (170) m (ft) (60) (80) (100) (140) (170)
Radius Radius
20,0 – 20,0
(70) (40.1) (70)
(( 87
24,0 15,6 – 24,0
Luffing Jib Length 18,3 m (60 ft)
Boom 18,3 24,4 30,5 42,7 51,8 Boom 18,3 24,4 30,5 42,7 51,8
m (ft) (60) (80) (100) (140) (170) m (ft) (60) (80) (100) (140) (170)
Radius Radius
32,0 10,1 – 32,0 ––
(105) (22.3) (105)
Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
fixed jib on luffing jib range diagram
No. 138A Fixed Jib on No. 155 Luffing Jib on No. 84 Main Boom
34
model 555
fixed jib on luffing jib load charts
Liftcrane Fixed Jib on Luffing Capacities - Series 2
Fixed Jib No. 138A at 3 Degree Angle on Luffing Jib No. 155 on Boom No. 84
44 680 kg (98,500 lb) Upperworks Counterweight
360° Rating
19 960 kg (44,000 lb) Carbody Counterweight
kg (lb) x 1 000
35
88˚ Boom Angle
Luffing Jib 42,7 45,7 48,8
m (ft) (140) (150) (160)
Boom 36.6 42,7 48,8 36.6 42,7 48,8 36.6 42,7 48,8
m (ft) (120) (140) (160) (120) (140) (160) (120) (140) (160)
Radius
16,8 12,0 11,3
(55) (26.5) (25.0)
20,0 11,7 11,0 10,1 10,6 9,9 9,2 9,5 8,9 8,3
(70) (25.8) (24.2) (22.3) (23.2) (21.8) (20.1) (20.7) (19.5) (18.2)
Fixed Jib Length 9,1 m (30 ft)
24,0 11,1 10,7 9,8 10,2 9,6 8,9 9,1 8,6 8,0
(80) (24.3) (23.7) (21.7) (22.5) (21.3) (19.7) (20.0) (18.9) (17.7)
30,0 9,4 9,4 8,9 9,2 9,1 8,4 8,6 8,1 7,6
(100) (20.6) (20.6) (19.4) (20.2) (20.1) (18.4) (18.9) (17.9) (16.7)
36,0 8,2 8,2 7,5 8,0 8,0 7,2 7,9 7,7 6,8
(120) (17.9) (17.9) (16.5) (17.6) (17.6) (15.8) (17.3) (16.8) (15.0)
42,0 7,2 7,1 6,3 7,1 6,9 6,1 7,0 6,6 5,9
(140) (15.8) (15.4) (13.7) (15.6) (15.1) (13.4) (15.4) (14.5) (12.9)
48,0 6,4 5,8 5,2 6,4 5,8 5,1 6,3 5,6 5,0
(160) (14.0) (12.6) (11.3) (13.8) (12.6) (11.2) (13.6) (12.3) (10.9)
54,0 4,3 4,6 4,3 5,2 4,8 4,3 5,1 4,8 4,2
(180) (7.9) (8.7) (9.4) (11.1) (10.5) (9.4) (11.1) (10.4) (9.2)
Boom 36.6 42,7 48,8 36.6 42,7 48,8 36.6 42,7 48,8
m (ft) (120) (140) (160) (120) (140) (160) (120) (140) (160)
Radius
– – – – –
(65) (14.6) (14.2) (13.8) (14.0)
24,0 6,2 6,1 5,9 6,0 5,8 5,6 5,7 5,5 5,3
(80) (13.8) (13.5) (13.0) (13.2) (12.9) (12.5) (12.6) (12.2) (11.7)
Fixed Jib Length 18,3 m (60 ft)
30,0 5,7 5,6 5,5 5,5 5,4 5,2 5,3 5,2 5,0
(100) (12.7) (12.4) (12.1) (12.2) (12.0) (11.6) (11.7) (11.4) (11.0)
36,0 5,3 5,2 5,1 5,2 5,1 4,9 5,0 4,8 4,7
(120) (11.8) (11.6) (11.3) (11.4) (11.2) (10.9) (11.0) (10.7) (10.4)
42,0 4,8 4,9 4,8 4,8 4,8 4,7 4,7 4,6 4,4
(140) (10.6) (10.7) (10.7) (10.4) (10.5) (10.3) (10.3) (10.1) (9.8)
48,0 4,3 4,3 4,3 4,2 4,2 4,2 4,2 4,1 4,2
model 555
(160) (9.4) (9.4) (9.4) (9.2) (9.3) (9.3) (9.1) (9.1) (9.1)
54,0 3,8 3,8 3,8 3,8 3,8 3,8 3,7 3,7 3,7
(180) (8.4) (8.4) (8.4) (8.3) (8.3) (8.3) (8.2) (8.2) (8.1)
60,0 3,5 3,5 3,3 3,4 3,4 3,3 3,4 3,4 3,2
(200) (7.6) (7.7) (7.1) (7.5) (7.5) (7.1) (7.4) (7.4) (7.0)
Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
fixed jib on luffing jib load charts
Liftcrane Fixed Jib on Luffing Capacities - Series 2
Fixed Jib No. 138A at 3 Degree Angle on Luffing Jib No. 155 on Boom No. 84
36 44 680 kg (98,500 lb) Upperworks Counterweight
360° Rating
19 960 kg (44,000 lb) Carbody Counterweight
kg (lb) x 1 000
85˚ Boom Angle
Luffing Jib 42,7 45,7 48,8
m (ft) (140) (150) (160)
Boom 36.6 42,7 48,8 36.6 42,7 48,8 36.6 42,7 48,8
m (ft) (120) (140) (160) (120) (140) (160) (120) (140) (160)
Radius
20,0 –
(70) (25.8)
26,0 11,1 10,6 9,8 10,1 9,5 8,8 8,9 8,4 7,9
(90) (23.7) (23.3) (21.5) (22.0) (20.8) (19.4) (19.5) (18.5) (17.3)
30,0 10,0 10,0 9,6 9,7 9,2 8,6 8,6 8,1 7,6
(100) (21.8) (21.9) (21.1) (21.3) (20.4) (18.9) (19.0) (18.0) (16.9)
36,0 8,6 8,6 8,7 8,4 8,5 8,2 8,2 7,8 7,3
(120) (18.8) (18.9) (19.0) (18.5) (18.6) (18.2) (18.1) (17.3) (16.2)
42,0 7,5 7,4 7,2 7,4 7,3 7,2 7,3 7,2 7,0
(140) (16.2) (16.0) (15.7) (16.1) (15.8) (15.6) (15.8) (15.5) (15.2)
48,0 6,1 6,0 5,9 6,0 5,9 5,8 5,9 5,8 5,7
(160) (13.2) (13.0) (12.8) (13.1) (12.9) (12.6) (12.8) (12.6) (12.3)
54,0 5,0 4,9 4,8 5,0 4,9 4,8 4,8 4,8 4,7
(180) (10.8) (10.7) (10.5) (10.7) (10.5) (10.4) (10.4) (10.3) (10.1)
Boom 36.6 42,7 48,8 36.6 42,7 48,8 36.6 42,7 48,8
m (ft) (120) (140) (160) (120) (140) (160) (120) (140) (160)
Radius
24,0 –
(80) (14.0)
30,0 5,9 5,7 5,6 5,6 5,5 5,3 5,3 5,2 5,0
(100) (12.9) (12.7) (12.4) (12.4) (12.2) (11.8) (11.8) (11.5) (11.1)
36,0 5,4 5,3 5,2 5,2 5,2 5,0 5,0 4,9 4,8
(120) (12.0) (11.8) (11.6) (11.6) (11.4) (11.1) (11.1) (10.9) (10.5)
42,0 5,1 5,0 4,9 4,9 4,9 4,8 4,7 4,6 4,5
(140) (11.1) (11.1) (10.9) (10.9) (10.8) (10.5) (10.5) (10.3) (10.0)
48,0 4,5 4,5 4,6 4,4 4,4 4,5 4,3 4,4 4,3
model 555
(160) (9.8) (9.9) (10.0) (9.6) (9.7) (9.8) (9.5) (9.6) (9.6)
54,0 4,0 4,0 4,1 3,9 3,9 4,0 3,9 3,9 3,9
(180) (8.7) (8.8) (8.9) (8.6) (8.7) (8.8) (8.5) (8.5) (8.6)
60,0 3,6 3,6 3,6 3,5 3,5 3,6 3,5 3,5 3,5
(200) (7.9) (8.0) (8.0) (7.8) (7.8) (7.9) (7.7) (7.7) (7.8)
Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
fixed jib on luffing jib load charts
Liftcrane Fixed Jib on Luffing Capacities - Series 2
Fixed Jib No. 138A at 3 Degree Angle on Luffing Jib No. 155 on Boom No. 84
44 680 kg (98,500 lb) Upperworks Counterweight
360° Rating
19 960 kg (44,000 lb) Carbody Counterweight
kg (lb) x 1 000
37
80˚ Boom Angle
Luffing Jib 42,7 45,7 48,8
m (ft) (140) (150) (160)
Boom 36.6 42,7 48,8 36.6 42,7 48,8 36.6 42,7 48,8
m (ft) (120) (140) (160) (120) (140) (160) (120) (140) (160)
Radius
28,0 –
(95) (23.7)
36,0 8,5 8,2 7,9 8,5 8,2 7,9 8,1 7,7 7,2
(120) (18.5) (17.9) (17.2) (18.4) (17.7) (17.0) (17.8) (16.9) (15.9)
42,0 6,8 6,5 6,3 6,7 6,5 6,2 6,6 6,3 6,1
(140) (14.7) (14.2) (13.6) (14.6) (14.0) (13.4) (14.2) (13.7) (13.1)
48,0 5,5 5,3 5,0 5,4 5,2 5,0 5,3 5,1 4,8
(160) (11.9) (11.4) (10.9) (11.8) (11.3) (10.8) (11.4) (10.9) (10.4)
54,0 4,5 4,3 4,1 4,4 4,3 4,0 4,3 4,1 3,9
(180) (9.7) (9.3) (8.9) (9.6) (9.2) (8.7) (9.3) (8.8) (8.4)
68,0 – 2,3
(220) (5.7) (5.4)
– –
(225) (5.1)
Boom 36.6 42,7 48,8 36.6 42,7 48,8 36.6 42,7 48,8
m (ft) (120) (140) (160) (120) (140) (160) (120) (140) (160)
Radius
– – – –
(110) (12.6) (12.4) (12.1)
42,0 5,2 5,1 5,0 5,0 4,9 4,8 4,8 4,7 4,6
(140) (11.5) (11.4) (11.2) (11.1) (10.9) (10.7) (10.6) (10.4) (10.1)
48,0 4,8 4,9 4,8 4,7 4,7 4,6 4,6 4,5 4,4
(160) (10.5) (10.7) (10.6) (10.3) (10.4) (10.2) (10.1) (9.9) (9.7)
54,0 4,2 4,3 4,2 4,2 4,3 4,1 4,1 4,2 4,0
(180) (9.3) (9.5) (9.2) (9.2) (9.4) (9.0) (9.0) (9.1) (8.6)
60,0 3,8 3,7 3,5 3,7 3,6 3,4 3,7 3,4 3,2
model 555
(200) (8.4) (8.0) (7.5) (8.2) (7.8) (7.4) (7.9) (7.5) (7.0)
68,0 3,0 2,9 2,7 3,0 2,8 2,6 2,8 2,6 2,5
(220) (6.9) (6.6) (6.2) (6.8) (6.4) (6.1) (6.5) (6.1) (5.7)
Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
Manitowoc Crane CARE
Crane CARE is Manitowoc’s comprehensive service and 200 Hour Kit
support program. It includes classroom and on-site Consists of the following:
training, prompt parts availability, expert field service,
38 technical support and documentation — for every one of
the more than 7,000 Manitowoc cranes currently in use
Engine
• Filter Oil (1)
throughout the world. • Filter Water (1)
• Filter Fuel (1)
That’s commitment you won’t find anywhere else.
1,000 Hour Kit
That’s Crane CARE.
Consists of the following:
Technical Support
Technical Documentation
Regional Offices
Americas
Brazil Netherlands China
Alphaville Breda Beijing
Tel: +55 11 4688 2716 Tel: +31 76 578 3999 Tel: +86 10 58674761
Fax: +55 11 4191 1471 Fax: +31 76 578 3978 Fax: +86 10 58674760
Mexico Poland Xi’an
Monterrey Warsaw Tel: +86 29 87891465
Tel: +52 81 8124 0128 Tel: +48 22 843 3824 Fax: +86 29 87884504
Fax: +52 81 8124 0129 Fax: +48 22 843 3471 Korea
Europe, Middle East, Africa Portugal Seoul
Algeria Alfena Tel: +82 2 3439 0400
Hydra Tel: +351 229 69 8840 Fax: +82 2 3439 0405
Tel: +21 3 21 48 1173 Fax: +351 229 69 8848 Philippines
Fax: +21 3 21 48 1454
Lisbon Makati City
Czeck Republic Tel: +351 212 109 340 Tel: +63 2 844 9437
Netvorice Fax: +351 212 109 349 Fax: +63 2 844 4712
Tel: +420 317 78 9313 Factories
Russia
Fax: +420 317 78 9314
Moscow U.S.A.
France Tel: +7 495 641 2359 Manitowoc
Baudemont Fax: +7 495 641 2358 Shady Grove
Tel: +33 385 28 2589 Brazil
U.A.E.
Fax: +33 385 28 0430 Alphaville
Dubai
Cergy Tel: +971 4 3381 861 France
Tel: +33 130 31 3150 Fax: +971 4 3382 343 Charlieu
Fax: +33 130 38 6085 La Clayette
U. K.
Decines Moulins
Middlesex
Tel: +33 472 81 5000 Tel: +44 1 895 43 0053 India
Fax: +33 472 81 5010 Fax: +44 1 895 45 9500 Calcutta
Germany Puna
Sunderland
Langenfeld Tel: +44 191 522 2000 Italy
Tel: +49 21 73 8909-0 Fax: +44 191 522 2052 Niella Tanaro
Fax: +49 21 73 8909 30
Asia – Pacific Germany
Hungary Australia Wilhelmshaven
Budapest Melbourne Portugal
Tel: +36 13 39 8622 Tel: +61 3 9 336 1300 Fânzeres
Fax: +36 13 39 8622 Fax: +61 3 9 336 1322
China
Italy Sydney Zhangjiagang
Parabiago Tel: +61 2 9 896 4433
Tel: +390 331 49 3311 Fax: +61 2 9 896 3122
Fax: +390 331 49 3330
www.manitowoccranegroup.com © 2 0 0 7 M A N I TOWO C 0 9 0 7- 5 5 5 - P G - U S - E