Professional Documents
Culture Documents
SE Tele
SE Tele
a) Channel modem
b) VFT card
nP
c) Base band combiner Board.
5) What are the basic requirements of PCM system? Explain about sampling?
6) List out the factors to be considered for selecting a site for a microwave station.
er
7) What do you understand by the terms – non-fade level, fade margin and threshold level.
Briefly explain each of them.
.O
8) What are the merits and de-merits of frequency diversity system over space diversity
system?
10) Draw the basic block diagram of an ELECTRONIC TELEPHONE and explain its working.
11) List out the features of any electronic exchange and explain any five features
Qu
12) What are the different types of modulation techniques and explain balance modulator?
13) Expalin about positive and negative feed back? Explain advantages of negative feedback
in amplifiers
es
14) Write short notes on any Three
15) What do you understand by hybrid circuit? Describe the audio range bybrid function in
full detail with diaram
ap
16) What are the precautions to be taken while loading the RE main telecom cable drums?
How cable is laid on culverts and bridges?
er
17) What are the different types of RE cable joints? Explain the function of loading coil joint
and condenser joint?
.O
18) What are the periodical tests to be carried out on underground cables and give the
accepted value?
rg
19) Write the quad allocation for 6-quad cable and give its electrical characteristics?
20) What are the periodical tests to be conducted on RE cable circuits and explain the
procedure for each? Write about emergency control in RE area
Qu
21) Explain the working of Section Control in RE area with the help of a Schematic diagram?
22) Draw the simplified circuit diagram of 2W control telephone and explain its working?
es
23) Descibe the basic differences between AM and FM receivers
27) What are the differences between Analog and Digital MW systems?
ap
28) Draw the block diagram QPSK modulator and explain briefly?
a) TXDPU
c) RXDPU
30) Draw the block diagram of 7D15 Radio equipment, and explain the type of switching
employed in 100% standby mode briefly?
31) Write the advantages of Harris Radio equipment over 7D15. Write the significance of
OSCMOD and Harmonic Mixer in the transmitter section of HARRIS Radio equipment?
Qu
32) State the salient features of 7D20 radio equipment.
5) K – Factor
6) Polarisation
nP
34) Explain the call processing in CDOT 128 P RAX?
ap
35) Draw the block diagram of CDOT 128P RAX and briefly explain each block?
36) Explain briefly about the difference circuit cards used in CDOT 128P PBX?
er
38) What is the use of Attendant Console used in OKI exchange? List out features of
attendant console?
i) Two frequency plan ii) fresnel zone. Iii) folded dipole antenna
iv) K-factor.
Each block.
tio
42) Explain call processing in any telephone exchange.
43) Draw the block diagram of push button telephone and explain each block.
nP
44) List out the special features of electronic exchange.
45) List out the wave guide devices used in microwave communication with their usages
ap
46) What are the periodical tests to be carried out for U/G RE cable?
er
47) What are the different types of cable joints used for RE cable? Explain what is loading
section.
.O
50) What daily maintenance you will carry out for diesel engine?
51) Describe the power supply arrangement provided in MW station with block diagram?
Qu
52) Write five advantages of SMPs over conventional power supply?
53) Explain the function of anyone of the microphone with necessary diagram and also
explain its characteristics?
es
54) What are the requirements needed to install a PA system for platform announcement?
tio
55) Briefly explain the PA system arrangements for conference hall.
58) What are the arrangements made at accident spot when the accident occurs in
ap
underground cable area?
59) What is the essential difference between ISDN and normal telephone system?
er
61) What are the faults in PRS system and what are the different types of tests to be
conducted to isolate the faults?
rg
a) Statistical Multiplexer.
b) Modem
Qu
c) LDR
d) Router.
es
63) Explain briefly about SLICA, SLICEE, LSLIC in OKI exchange. List out any 12 cards
used in CME rack.
64) What is the use of Attendant Console used inOKI exchange? List out features of
tio
attendant console?
67) What is the need for matching in PA system. Explain voltage matching method with
ap
necessary diagram.
69) What is meant by UPS? Name the three types of UPS and explain any one of them with
block diagram? Give it uses?
.O
70) 70) What are the advantages of SMPS over linear power supply? Explain briefly
working of SMPS with block diagram.
rg
c) Voltage regulator
d) VRLA battery
Qu
e) Initial charging of lead acid battery
72) What are the advantages and disadvantages of SMPS over conventional power plants?
es
73) What are the maintenance requirement for conventional lead acid batteries ?
tio
74) Write the different types of battery charging and where they are used?
78) Write what precautions you will take to avoid defects in lead acid battery? Draw the
simple type of battery charger block diagram and explain function of each stage?
er
79) Explain with a neat sketch how the tapping for a way station is done in a 4- wire
DTMF Control communication system.
.O
80) Explain with a block diagram the working of DTMF decoder used in way station.
rg
81) Explain the working of an auto dialling system and how it is used in control working?
82) What are the different types of main telecom cable joints used in RE area? Explain the
function of each joint.
Qu
83) What are the periodical tests to be conducted in RE main telecom cable?
86) What do you know about electronic exchanges and different circuits used in any
tio
electronic telephone exchange? Briefly explain.
90) What would be the role of a railway servant in the case of train accident, when he/she is
traveling in the same train?
er
91) What would be the role of the testroom during an accident of passenger train?
.O
92) Why earth is required ? Give five points in support of your explanation.
93) Explain with schematic diagram the principle of SMPS based power plants.
rg
ESTABILISHMENT, STORES AND OFFICIAL LANGUAGE:
1) What is a Duty Pass? Explain the occasions for which different types of duty passes are
Qu
issued to an Railway employee?
7) Give the classification of Railway employees under HOER. Mention the Rostered
hours, statutory hours, and rest period for each?
ap
9) List out the Minor and Major penalties and Disciplinary and Appeal rules as applicable to
railway servents
.O
b) MAS account.
c) DMTR
es
d) PAC
e) Non-stock requisition
tio
14) Explain the following:
c) Method of SV.
b) Charged expenditure.
er
c) Budget estimates.
17) What is meant by EMD & SD ? Who will pay and explain with rates?
rg
18) What is M.B. and how M.B. is filled? Explain with example.
19) Write 10 points on the DO’s and Don’ts in execution of work from vigilance angle
20) What are the different type of stores to be maintained by an SE/Tele? Give the purpose,
Qu
scale accountal of each type.
21) What is the need for stock verification? Give the types and explain how the stock
verification is done?
es
22) What is single tender and when it is done?
tio
23) What are the different steps taken by Railways to implement use of Hindi in official work
24) What incentives are given for passing various Hindi examinations?
nP
25) What are the incentives for the use of Rajbhasha ?
26) According to official language group, with how many regions India is divided ? Mention
the Different states under each region ?
ap
OBJECTIVE QUESTIONS.
er
A) 1 B) 2 C) 4 D) 6 (C)
rg
3) Group D staff retired after 20 years of service will get the following sets of passes
Qu
A) 2 B) 1 C) 3 D) NIL (B)
A) 600 db B) 7 db C) 27 db (C)
nP
15) Output transformer is always a - - - - transformer
A) 16 B) 8 C) 2 (B)
tio
40) A typical Microcomputer have - - - registers in memory
43) Which is the logic gate, where all input signals must be high to get a high output
is lifted
tio
A) Busy tone B) Dial tone C) No tone D) Ring back tone (B)
48) What is the break down voltage suggested for lightening dischargers (LD) in
nP
the MDF of telephone exchanges
51) The maximum number of subscriber lines in C-DOT 128P RAX type exchange is
52) The duplication system employed for the PSU card of an electronic exchange is
56) How the telecom equipment is connected to the earth electrode (A)
57) What are the materials used to prepare an efficient earth for telecom equipment ( A )
.O
A) 60 B) 99 C) 100 D) 90 (B)
es
60) DTMF control equipment works on
A ) 5 B) 15 C) 12 D) 20
ap
63) Block circuits in RE area works on
(C)
64) To increase the ampere hour capacity of secondary cells, the cells are to be
connected in
A) Series B) Parallel C) Series and Parallel D) One above the other (B)
.O
65) No. of cable pairs required for 4 wire E&M working are (C)
A) AC to DC B) DC to AC C) DC to DC D) AC to AC
tio
68) For converting 2 wire to 4 wire the following is required ( C
)
A) 2 db B) 3db C) 4 db D) No loss
er
71) A power amplifier gives a gain of 3 db when the input is 1 W the output is: ( B)
A) 1.3W B) 2 W C) 3 W D) .3 W
.O
A) MW B) VHF C) UHF D) HF
rg
73) Hybrid transformer is used in the following electronic exchange card (D)
A) LCC B) SPC C) TIC D) TGT
Qu
74) In electronic exchange the system software is written as
(D)
A) 17 KM B) 40 KM C) 60 KM D) 1860 M
A) 2 + 0 + 12 B) 0 + 2 + 12 C) 0 + 12 + 2 D) 0 + 14
es
84) Float charge voltae adjusted per cell in ( A)
A) Stock item B) Non –stock item C) Surplus item D) Moveable item (C)
tio
90) Accounts department stock verification for stores with Imprest holder are checked once in
93) At the time of retirement a permanent railway employee will get encashment of
A) 3 B) 2 C) 4 D) 6 (B)
rg
96) Post retirement passes for Group ‘C’ employee with 24 years of service will be
Qu
A) 2 B) 1 C) 3 (B)
99) Joining time for more than 2000 kms from old HQ to new HQ is
nP
A)10 DAYS B) 15 DAYS C)20 DAYS D) 5 DAYS (B)
A) 1 B) 2 C) 4 D) 6 (C)
ap
101) Leave not due during entire service shall be limited to a maximum of
102) Group D staff retired after 20 years of service will get the following sets of passes
.O
A) 2 B) 1 C) 3 D) NIL (B)
form number
nP
Object 1
ap
er
.O
rg