Professional Documents
Culture Documents
EDBPL/HR/F007
dd-MMM-yyyy
First Last
Email *
Phone *
Qualification
Educational Status
Pursuing
Passed Out
College
University
City
State
https://forms.e-construct.in/econstruct/form/TECHNICALTESTFORPLACEMENTDRIVE/formperma/2_1nAwwjFH0ZBRiUCfaJVhYSOmYM4ebvLUH6tf… 1/8
7/14/2020 TECHNICAL TEST FOR PLACEMENT DRIVE
Country
Drafting
BIM Technology
Structural Design
Site Engineering
Vastu
Project Management
Choose as applicable *
https://forms.e-construct.in/econstruct/form/TECHNICALTESTFORPLACEMENTDRIVE/formperma/2_1nAwwjFH0ZBRiUCfaJVhYSOmYM4ebvLUH6tf… 2/8
7/14/2020 TECHNICAL TEST FOR PLACEMENT DRIVE
A) AY Enter
B) A Enter
C) AR Enter
D) AA Enter
https://forms.e-construct.in/econstruct/form/TECHNICALTESTFORPLACEMENTDRIVE/formperma/2_1nAwwjFH0ZBRiUCfaJVhYSOmYM4ebvLUH6tf… 3/8
7/14/2020 TECHNICAL TEST FOR PLACEMENT DRIVE
1) According to IS 456:2000, the span to effective depth ratios for spans upto 10m for a simply supported beam is
A) 7
B) 26
C) 30
D) 20
4) The total number of degree of freedom for fixed support in 3d space frame analysis are
A) 0
B) 2
C) 3
D) 6
9) The codebook for Wind load, Dead load and live load respectively is
https://forms.e-construct.in/econstruct/form/TECHNICALTESTFORPLACEMENTDRIVE/formperma/2_1nAwwjFH0ZBRiUCfaJVhYSOmYM4ebvLUH6tf… 4/8
7/14/2020 TECHNICAL TEST FOR PLACEMENT DRIVE
A) IS 875 part 1, IS 875 part 2, IS 875 part 3
B) IS 875 part 3 IS 875 part 1, IS 875 part 2
C) IS 875 part 3 IS 875 part 2, IS 875 part 1
D) IS 875 part 2, IS 875 part 1, IS 875 part 3
10) What is the formula for flexural strength of concrete as per IS 456?
A) 0.25√fck
B) 0.16√fck
C) 0.45√fck
D) 0.7√fck
1) If you fill up a cube of 1mX1mX1m with plain cement concrete, what will be the weight of the unit
A) 2400 kg
B) 2400 N
C) 240 kg
D) 24000 kg
3) A type of bond in a brick masonry consisting of alternate course of headers and stretchers, is called
A) English Bond
B) Flemish Bond
C) Stretcher Bond
D) Header Bond
4) What is the minimum diameter of a longitudinal bar used as reinforcement in an RCC column
A) 16 mm
B) 12 mm
C) 10 mm
D) 8 mm
9) While compacting the concrete by a mechanical vibrator, the slump should not exceed
A) 2.5 cm
B) 5 cm
C) 7.5 cm
D) 10 cm
https://forms.e-construct.in/econstruct/form/TECHNICALTESTFORPLACEMENTDRIVE/formperma/2_1nAwwjFH0ZBRiUCfaJVhYSOmYM4ebvLUH6tf… 5/8
7/14/2020 TECHNICAL TEST FOR PLACEMENT DRIVE
4) What area of the house should have “Least Occupancy” as per Vastu?
A) Center
B) East
C) North
D) South
5) What area of the house should have “Maximum Occupancy” as per Vastu?
A) Center
B) East
C) North
D) South
7) Which is the most appropriate place for Puja Room, according to Vastu?
A) North - East
B) South - West
C) South - East
D) North - West
1) “CONQUAS” refers to
https://forms.e-construct.in/econstruct/form/TECHNICALTESTFORPLACEMENTDRIVE/formperma/2_1nAwwjFH0ZBRiUCfaJVhYSOmYM4ebvLUH6tf… 6/8
7/14/2020 TECHNICAL TEST FOR PLACEMENT DRIVE
A) Construction Quality Auditing System
B) Construction Quality Assured
C) Construction Quality Assurance System
D) Construction Quality Assessment System
Verification Code *
https://forms.e-construct.in/econstruct/form/TECHNICALTESTFORPLACEMENTDRIVE/formperma/2_1nAwwjFH0ZBRiUCfaJVhYSOmYM4ebvLUH6tf… 7/8
7/14/2020 TECHNICAL TEST FOR PLACEMENT DRIVE
Submit
https://forms.e-construct.in/econstruct/form/TECHNICALTESTFORPLACEMENTDRIVE/formperma/2_1nAwwjFH0ZBRiUCfaJVhYSOmYM4ebvLUH6tf… 8/8