Professional Documents
Culture Documents
CHARACTERISTICS
R438 controls the excitation current in order to maintain the output voltage of the ••Protection : fuse 8A.
alternator. R438 is performant in terms of voltage regulation, simple to set , to use
and is reliable.
It can run without LAM (U/f), or with LAM, selection is done by strap ST5. It is in
compliance with I.E.C. 60034-1 standard and U.L. 508 / C.S.A. approved.
OPERATION RANGE
AREP - - - - - - -
PMG - - - - - - - -
LAM FUNCTION
Load on
(U/f) 0,9 Variation in the load
without LAM without
0,8 with LAM LAM Load shedding due to LAM
Time 0,8 Time Time
0 1s 2s 3s 0 1s 2s 3s
0 1s 2s 3s
ST5 F1 ST10 P1
Slow fuse LAM Quad
droop
250V 8 A
with LAM without
CONNEXION AND SETTING LAM
ST3
13% 25%
140 mm
Settings are done through the AVR. Frequency X2 Z1 X1 Z2 E+ E- 0V 110 220 380 125 mm 4 x holes Ø 5,8 x
115 x 100 mm
P5
setting.
S1 P1 Ph.1
Excitation
ceiling ST4
External
ST2 P3 ST1 P2
potentiometer
for adjusting the
Response Stability Voltage voltage
time Single-phase
detection Option 3-ph.
normal fast detection
R731
in 3-ph.
detection ST1
open
© Nidec 2017. The information contained in this brochure is for guidance only and does not form part of any contract. The accuracy cannot be guaranteed as Nidec have an ongoing process of
development and reserve the right to change the specification of their products without notice.