Professional Documents
Culture Documents
C-120 Front End & Rear End
C-120 Front End & Rear End
Date:-07-12-2017
COMPLIANCE CERTIFICATE
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG
Actual 453 640 22.12 192 40 42 36 39.33
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77023508000 099 Rev 02
EN-1371 SP3,CP3,LP3,AP3 7MT200719200 Rev 02 ITP11500M PRAMOD BK SINGH
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on file and
available for review.
Report No-BSL-METSO-17-B-02
COMPLIANCE CERTIFICATE Date:-24-11-2017
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% Cu% CE%
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.33 0.88 0.33 0.02 0.027 0.23 0.016 0.030 0.031 0.53
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
18 °C
Actual 460 643 21.02 192 30 38 34 34
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
2
BSL-D-B-04012018 77023508000-099 7MT200719200 2 ITP11500M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77023508000-099
EN-12680 II&IV Rev 02 ITP11500M JITENDRA BK SINGH
Rev 02
7MT200719200
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77023508000-099
EN-1371 SP3,CP3,LP3,AP3 Rev 02 ITP11500M PRAMOD BK SINGH
Rev 02
7MT200719200
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP11500M VINOD BK SINGH
7MT200719200 Rev 02
Report No-BSL-METSO-17-B-03
Date:-05-01-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Actual 0.29 1.28 0.31 0.017 0.024 0.11 0.004 0.026 0.039 0.004 0.53
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
Actual 451 639 23.64 192 32 44 40 38.67 18 °C
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
Rev 2
BSL-D-B-01012018 77023508000-099 7MT200719200 Rev 2 ITP11500M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77023508000-099
EN-12680 II&IV Rev 02 ITP11500M JITENDRA BK SINGH
Rev 02
7MT200719200
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02
EN-1371 SP3,CP3,LP3,AP3 Rev 02 ITP11500M PRAMOD BK SINGH
7MT200719200
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77023508000-099
EN-1370 A3,B4,G2,H3,J2 Rev 02 ITP11500M VINOD BK SINGH
Rev 02
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-18-B-04
COMPLIANCE CERTIFICATE Date:-13-02-2018
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.30 0.28 0.015 0.020 0.18 0.010 0.040 0.05 0.01 0.56
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
Actual 460 639 22.42 192 30 36 34 33.33 18 °C
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 2
BSL-D-B-03022018 77023508000-099 7MT200719200 Rev 2 ITP11500M VINODD BK SINGH
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02
EN-12680 II&IV Rev 02 ITP11500M JITENDRA BK SINGH
7MT200719200
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77023508000-099
EN-1371 SP3,CP3,LP3,AP3 Rev 02 ITP11500M PRAMOD BK SINGH
Rev 02
7MT200719200
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features Drawing No Rev: Name of Inspector Approved
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP11500M VINOD BK SINGH
7MT200719200 Rev 02
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-18-B-05
COMPLIANCE CERTIFICATE Date:-13-02-2018
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.32 1.27 0.40 0.015 0.021 0.13 0.010 0.030 0.016 0.01 0.56
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02
EN-12680 II&IV Rev 02 ITP11500M JITENDRA BK SINGH
7MT200719200
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1369 LM3,SM3,AM3 ITP11500M MOHAN BK SINGH
Rev 02
7MT200719200
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77023508000-099 Rev 02
EN-1371 SP3,CP3,LP3,AP3 ITP11500M PRAMOD BK SINGH
7MT200719200 Rev 02
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features Drawing No Rev: Name of Inspector Approved
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-1370 A3,B4,G2,H3,J2 Rev 02 ITP11500M VINOD BK SINGH
Rev 02
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-18-B-06
Date:-28-02-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% Cu% V% CE%
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.32 1.50 0.29 0.017 0.023 0.18 0.020 0.050 0.023 0.01 0.62
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02
EN-12680 II&IV Rev 02 ITP11500M JITENDRA BK SINGH
7MT200719200
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1369 LM3,SM3,AM3 ITP11500M MOHAN BK SINGH
7MT200719200 Rev 02
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77023508000-099 Rev 02
EN-1371 SP3,CP3,LP3,AP3 ITP11500M PRAMOD BK SINGH
Rev 02
7MT200719200
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features Drawing No Rev: Name of Inspector Approved
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02
EN-1370 A3,B4,G2,H3,J2 Rev 02 ITP11500M VINOD BK SINGH
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-18-B-07
Date:-12-04-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
Actual 446 639 22.12 187 40 42 38 40 21 °C
DIMENSIONAL - DM
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02
EN-1371 SP3,CP3,LP3,AP3 Rev 02 ITP11500M PRAMOD BK SINGH
7MT200719200
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-18-B-08
Date:-19-04-2018
COMPLIANCE CERTIFICATE
Report No-BSL-METSO-18-B-08
Date:-19-04-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% Cu% V% CE%
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.33 1.31 0.31 0.021 0.027 0.13 0.010 0.040 0.028 0 0.58
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
Rev 2
BSL-D-B-13042018 77023508000-099 7MT200719200 Rev 2 ITP11500M VINODD BK SINGH
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-12680 II&IV Rev 02 ITP11500M JITENDRA BK SINGH
Rev 02
7MT200719200
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77023508000-099
Rev 02
EN-1371 SP3,CP3,LP3,AP3 Rev 02 ITP11500M PRAMOD BK SINGH
7MT200719200
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-1370 A3,B4,G2,H3,J2 Rev 02 ITP11500M VINOD BK SINGH
Rev 02
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-18-B-09
Date:-21-06-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% Cu% V% CE%
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.32 1.31 0.33 0.017 0.026 0.14 0.000 0.020 0.017 0 0.57
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 2
BSL-D-B-19062018 77023508000-099 7MT200719200 ITP11500M VINODD BK SINGH
Rev 2
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-12680 II&IV ITP11500M JITENDRA BK SINGH
7MT200719200 Rev 02
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02
EN-1369 LM3,SM3,AM3 Rev 02 ITP11500M MOHAN BK SINGH
7MT200719200
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77023508000-099
Rev 02
EN-1371 SP3,CP3,LP3,AP3 Rev 02 ITP11500M PRAMOD BK SINGH
7MT200719200
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features Drawing No Rev: Name of Inspector Approved
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02
EN-1370 A3,B4,G2,H3,J2 Rev 02 ITP11500M VINOD BK SINGH
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-18-B-10
Date:-21-06-2018
COMPLIANCE CERTIFICATE
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-12680 II&IV Rev 02 ITP11500M JITENDRA BK SINGH
Rev 02
7MT200719200
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
77023508000-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP11500M VINOD BK SINGH
7MT200719200 Rev 02
I affirm that the samples represented by this report are representative of our parts. I also
certify that documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-18-B-12
Date:-14-07-2018
COMPLIANCE CERTIFICATE
Report No-BSL-METSO-18-B-12
Date:-14-07-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.31 0.92 0.31 0.016 0.026 0.12 0.019 0.070 0.016 0.005 0.5
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
Rev 2
BSL-D-B-08082018 77023508000-099 Rev ITP11500M VINODD BK SINGH
7MT200719200
2
ULTRASONIC TEST - UT
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-1369 LM3,SM3,AM3 Rev 02 ITP11500M MOHAN BK SINGH
Rev 02
7MT200719200
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-18-B-13
Date:-18-07-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.34 1.32 0.30 0.019 0.030 0.2 0.010 0.021 0.014 0.007 0.61
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 451 645 22.02 207 44 48 44 45.33
DIMENSIONAL - DM
77023508000-099 Rev 2
BSL-D-B-14082018 Rev ITP11500M VINODD BK SINGH
7MT200719200 2
ULTRASONIC TEST - UT
77023508000-099
Rev 02
EN-1369 LM3,SM3,AM3 Rev 02 ITP11500M MOHAN BK SINGH
7MT200719200
PENETRANT TESTING - PT
77023508000-099 Rev 02
EN-1371 SP3,CP3,LP3,AP3 ITP11500M PRAMOD BK SINGH
Rev 02
7MT200719200
VISUAL INSPECTION - VT
77023508000-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP11500M VINOD BK SINGH
Rev 02
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-18-B-14
Date:-14-07-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.31 1.33 0.34 0.017 0.024 0.13 0.003 0.025 0.014 0.003 0.56
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 430 643 22.12 187 40 32 36 36
DIMENSIONAL - DM
77023508000-099 Rev 2
BSL-D-B-08082018 Rev ITP11500M VINODD BK SINGH
7MT200719200 2
ULTRASONIC TEST - UT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-15
Date:-16-05-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.32 0.32 0.019 0.030 0.14 0.009 0.029 0.024 0.007 0.55
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 464 693 23.82 207 44 40 54 46
DIMENSIONAL - DM
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-16
Date:-16-05-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.10 0.33 0.023 0.027 0.14 0.001 0.014 0.015 0.003 0.51
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 462 689 23.48 207 46 40 54 46.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
Rev 2
77023508000-099
BSL-D-B-02-03-2019 7MT200719200 Rev ITP11500M VINODD BK SINGH
2
ULTRASONIC TEST - UT
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02
EN-1369 LM3,SM3,AM3 ITP11500M MOHAN BK SINGH
Rev 02
7MT200719200
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP11500M VINOD BK SINGH
Rev 02
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-17
Date:-16-05-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.32 0.95 0.30 0.02 0.028 0.12 0.004 0.023 0.018 0.004 0.51
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
48 °C
Actual 452 659 22.75 187 42 56 46 48
DIMENSIONAL - DM
77023508000-099 Rev 2
BSL-D-B-02-03-2019 Rev ITP11500M VINODD BK SINGH
7MT200719200 2
ULTRASONIC TEST - UT
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02
EN-1369 LM3,SM3,AM3 Rev 02 ITP11500M MOHAN BK SINGH
7MT200719200
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-18
Date:-16-05-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.28 1.30 0.27 0.021 0.031 0.23 0.013 0.490 0.028 0.007 0.58
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
19 °C
Actual 482 690 23.15 207 40 48 56 48
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
Rev 2
77023508000-099
BSL-D-B-12-03-2019 Rev ITP11500M VINODD BK SINGH
7MT200719200
2
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02 Rev
EN-12680 II&IV ITP11500M JITENDRA BK SINGH
02
7MT200719200
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1369 LM3,SM3,AM3 Rev 02 ITP11500M MOHAN BK SINGH
7MT200719200
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1371 SP3,CP3,LP3,AP3 ITP11500M PRAMOD BK SINGH
Rev 02
7MT200719200
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-19
Date:-18-09-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.31 1.40 0.33 0.02 0.021 0.12 0.003 0.018 0.017 0.003 0.57
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 468 685 22.04 207 48 50 38 45.33
DIMENSIONAL - DM
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-20
Date:-18-09-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.02 0.34 0.021 0.025 0.14 0.004 0.017 0.021 0.008 0.5
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
22 °C
Actual 463 690 22.28 207 42 46 44 44
DIMENSIONAL - DM
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77023508000-099 Rev 02 Rev
EN-12680 II&IV 02 ITP11500M JITENDRA BK SINGH
7MT200719200
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-1369 LM3,SM3,AM3 Rev 02 ITP11500M MOHAN BK SINGH
7MT200719200 Rev 02
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-19
Date:-18-09-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.32 1.29 0.31 0.016 0.019 0.11 0.001 0.014 0.0011 0.003 0.56
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
19 °C
Actual 502 698 21.33 187 44 38 56 46
DIMENSIONAL - DM
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-20
Date:-18-09-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.32 1.31 0.30 0.015 0.024 0.15 0.007 0.017 0.019 0.58
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 466 687 22.12 207 58 46 48 50.67
DIMENSIONAL - DM
77012504002-099 Rev2
BSL-D-B-21-09-2019 ITP115006M VINODD BK SINGH
7MT200720501 Rev 1
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77012504002-099 Rev 02 Rev
EN-12680 II&IV ITP115006M JITENDRA BK SINGH
01
7MT200720501
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77012504002-099
EN-1370 A3,B4,G2,H3,J2 Rev 02 ITP115006M VINOD BK SINGH
7MT200720501 Rev 01
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-21
Date:-18-09-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.40 0.33 0.02 0.021 0.12 0.003 0.018 0.018 0.58
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 483 691 22.06 207 68 46 40 51.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77012504002-099 Rev2
BSL-D-B-20-09-2019 7MT200720501 Rev 1 ITP115006M VINODD BK SINGH
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-22
Date:-10-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.38 0.33 0.016 0.028 0.12 0.006 0.018 0.012 0.56
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 437 631 23.18 187 38 44 58 46.67
DIMENSIONAL - DM
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-23
Date:-10-12-2019
COMPLIANCE CERTIFICATE
Report No-BSL-METSO-19-B-23
Date:-10-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.32 1.21 0.28 0.02 0.022 0.12 0.009 0.019 0.021 0.007 0.55
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 432 647 21.92 187 42 46 58 48.67
DIMENSIONAL - DM
77012504003-099 Rev.4
BSL-D-B-29-11-2019 Rev ITP115006M VINODD BK SINGH
7MT200719300 2
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77012504003-099
EN-12680 II&IV Rev 04 ITP115006M JITENDRA BK SINGH
7MT200719300 Rev 02
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77012504003-099
Rev 04
EN-1370 A3,B4,G2,H3,J2 ITP115006M VINOD BK SINGH
7MT200719300 Rev 02
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-24
Date:-10-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.40 0.33 0.016 0.020 0.11 0.023 0.025 0.025 0.008 0.56
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 475 683 22.86 207 48 52 46 48.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
Rev.4
BSL-D-B-08-12-2019 77012504003-099 Rev ITP115006M VINODD BK SINGH
7MT200719300 2
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-25
Date:-10-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.27 0.28 0.02 0.028 0.17 0.017 0.024 0.07 0.006 0.56
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 449 661 13.84 197 48 44 52 48
DIMENSIONAL - DM
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77012504003-099
Rev 04
EN-12680 II&IV ITP115006M JITENDRA BK SINGH
Rev 02
7MT200719300
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77012504003-099 Rev 04
EN-1369 LM3,SM3,AM3 ITP115006M MOHAN BK SINGH
7MT200719300 Rev 02
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77012504003-099
Rev 04
EN-1371 SP3,CP3,LP3,AP3 ITP115006M PRAMOD BK SINGH
Rev 02
7MT200719300
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-26
Date:-13-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.31 1.35 0.33 0.021 0.024 0.12 0.004 0.017 0.024 0.006 0.56
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
19 °C
Actual 459 665 22.76 197 40 58 50 49.33
DIMENSIONAL - DM
77012504002-099 Rev2
BSL-D-B-14-12-2019 7MT200720501 Rev 1 ITP115006M VINODD BK SINGH
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77012504002-099 Rev 02
EN-1371 SP3,CP3,LP3,AP3 ITP115006M PRAMOD BK SINGH
Rev 01
7MT200720502
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-27
Date:-13-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.33 1.42 0.28 0.017 0.026 0.13 0.013 0.014 0.023 0.59
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 432 631 22.86 187 44 40 56 46.67
DIMENSIONAL - DM
77012504002-099 Rev2
BSL-D-B-14-12-2019 ITP115006M VINODD BK SINGH
7MT200720501 Rev 1
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-343
Date:-13-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.32 0.37 0.02 0.024 0.18 0.300 0.033 0.085 0.59 0.479
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
18 °C
Actual 586 708 23.62 217 44 48 56 49.3
DIMENSIONAL - DM
77082404300-099 Rev 5
BSL-D-H-16-12-2019 ITP115002M VINODD BK SINGH
7MT200720503 Rev 4
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-344
Date:-13-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.40 0.33 0.018 0.029 0.24 0.300 0.017 0.08 0.016 0.49
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
19 °C
Actual 598 704 23.64 217 36 56 48 46.67
DIMENSIONAL - DM
77082404331-099 Rev 1
BSL-D-H-10-12-2019 ITP115002M VINODD BK SINGH
7MT201018300 Rev 0
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-345
Date:-21-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.30 0.34 0.015 0.020 0.23 0.300 0.027 0.075 0.032 0.476
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 593 713 21.92 223 52 46 40 46
DIMENSIONAL - DM
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404326-099 Rev 04
EN-12680 II&IV Rev 00 ITP115002M JITENDRA BK SINGH
7MT200900800
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404326-099
EN-1369 LM3,SM3,AM3 Rev 04 ITP115002M MOHAN BK SINGH
7MT200900800 Rev 00
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404326-099
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
Rev 00
7MT200900800
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404326-099
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
Rev 00
7MT200900800
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-346
Date:-21-07-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.30 0.23 0.015 0.024 0.20 0.27 0.03 0.07 0.02 0.462
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 572 682 21.32 207 52 42 46 46.67
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
Rev 05
BSL-D-H-28-07-2020 77082404310-099 Rev ITP115002M VINODD BK SINGH
7MT2001017400 00
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404310-099
EN-12680 II&IV Rev 05 ITP115002M JITENDRA BK SINGH
7MT2001017400 Rev 00
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404310-099
Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT2001017400
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404310-099
Rev 05
EN-1370 A3,B4,G2,H3,J2 ITP115002M VINOD BK SINGH
Rev 00
7MT2001017400
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-347
Date:-21-07-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.28 0.26 0.016 0.02 0.23 0.28 0.02 0.09 0.02 0.466
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 591 714 23.64 217 52 48 46 48.67
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
Rev 05
77082404310-099
BSL-D-H-29-06-2020 7MT2001017400 Rev ITP115002M VINODD BK SINGH
00
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404310-099
EN-12680 II&IV Rev 05 ITP115002M JITENDRA BK SINGH
Rev 00
7MT2001017400
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404310-099
Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT2001017400
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404310-099
Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT2001017400
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-348
Date:-21-07-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.22 0.29 0.012 0.019 0.26 0.30 0.02 0.09 0.02 0.456
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 592 701 21.36 217 50 48 44 47.33
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 05
77082404310-099
BSL-D-H-23-06-2020 7MT2001017400 Rev ITP115002M VINODD BK SINGH
00
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404310-099
EN-12680 II&IV Rev 05 ITP115002M JITENDRA BK SINGH
Rev 00
7MT2001017400
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404310-099
Rev 05
EN-1371 SP3,CP3,LP3,AP3 ITP115002M PRAMOD BK SINGH
7MT2001017400 Rev 00
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features Drawing No Rev: Name of Inspector Approved
SCRATA PPS/ITP/PMCRS Deviation Number
77082404310-099
Rev 05
EN-1370 A3,B4,G2,H3,J2 ITP115002M VINOD BK SINGH
7MT2001017400 Rev 00
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-349
Date:-16-05-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.30 0.30 0.012 0.020 0.22 0.28 0.130 0.07 0.01 0.464
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 598 728 23.64 232 56 48 46 50.00
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
Rev 05
BSL-D-H-20-02-2020 77082404310-099 Rev ITP115002M VINODD BK SINGH
7MT2001017400 00
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404310-099
EN-12680 II&IV Rev 05 ITP115002M JITENDRA BK SINGH
7MT2001017400 Rev 00
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404310-099
Rev 05
EN-1371 SP3,CP3,LP3,AP3 ITP115002M PRAMOD BK SINGH
7MT2001017400 Rev 00
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features Drawing No Rev: Name of Inspector Approved
SCRATA PPS/ITP/PMCRS Deviation Number
77082404310-099
Rev 05
EN-1370 A3,B4,G2,H3,J2 ITP115002M VINOD BK SINGH
7MT2001017400 Rev 00
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-350
Report No-BSL-METSO-20-H-350
Date:-16-05-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.12 1.26 0.34 0.014 0.020 0.24 0.31 0.02 0.09 0.01 0.45
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 605 734 22.64 223 58 44 40 47.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404310-099 Rev 05
BSL-D-H-16-05-2020 7MT2001017400 Rev ITP115002M VINODD BK SINGH
00
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404310-099 Rev 05
EN-12680 II&IV Rev 00 ITP115002M JITENDRA BK SINGH
7MT2001017400
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404310-099 Rev 05
EN-1369 LM3,SM3,AM3 Rev 00 ITP115002M MOHAN BK SINGH
7MT2001017400
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404310-099
EN-1371 SP3,CP3,LP3,AP3 Rev 05 ITP115002M PRAMOD BK SINGH
Rev 00
7MT2001017400
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404310-099 Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT2001017400
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-351
Date:-16-05-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.45 0.29 0.015 0.022 0.23 0.29 0.019 0.08 0.0 0.494
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
18 °C
Actual 672 741 22.96 217 86 92 76 84.67
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404326-099 Rev 4
BSL-D-H-19-05-2020 ITP115002M VINODD BK SINGH
7MT200900800 Rev 0
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404326-099
Rev 04
EN-12680 II&IV Rev 00 ITP115002M JITENDRA BK SINGH
7MT200900800
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404326-099
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200900800 Rev 00
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features Drawing No Rev: Name of Inspector Approved
SCRATA PPS/ITP/PMCRS Deviation Number
77082404326-099
Rev 04
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT200900800
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-352
Date:-21-07-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.28 0.26 0.016 0.020 0.23 0.29 0.02 0.09 0.02 0.477
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 587 722 23.84 232 48 56 54 52.67
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
BSL-D-H-22-07-2020 7MT200720503 Rev 04 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099
Rev 05
EN-12680 II&IV Rev 04 ITP115002M JITENDRA BK SINGH
7MT200720503
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099
Rev 05
EN-1369 LM3,SM3,AM3 Rev 04 ITP115002M MOHAN BK SINGH
7MT200720503
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099
Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404300-099
EN-1370 A3,B4,G2,H3,J2 Rev 05 ITP115002M VINOD BK SINGH
Rev 04
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-353
Date:-21-07-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.30 0.23 0.015 0.024 0.20 0.027 0.03 0.07 0.02 0.469
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 576 692 22.96 217 46 50 58 51.33
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
BSL-D-H-28-07-2020 7MT201018300 Rev 00 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099
Rev 01
EN-12680 II&IV ITP115002M JITENDRA BK SINGH
7MT201018300 Rev 00
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-1371 SP3,CP3,LP3,AP3 ITP115002M PRAMOD BK SINGH
Rev 00
7MT201018300
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404331-099
EN-1370 A3,B4,G2,H3,J2 Rev 01 ITP115002M VINOD BK SINGH
Rev 00
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-354
Date:-21-07-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.30 0.30 0.012 0.200 0.22 0.28 0.01 0.07 0.01 0.472
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 576 686 22.24 217 48 52 50 50.00
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
BSL-D-H-28-07-2020 ITP115002M VINODD BK SINGH
7MT201018300 Rev 00
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099
Rev 01
EN-12680 II&IV ITP115002M JITENDRA BK SINGH
Rev 00
7MT201018300
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099
Rev 01
EN-1371 SP3,CP3,LP3,AP3 ITP115002M PRAMOD BK SINGH
7MT201018300 Rev 00
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features Drawing No Rev: Name of Inspector Approved
SCRATA PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-1370 A3,B4,G2,H3,J2 ITP115002M VINOD BK SINGH
Rev 00
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-355
Date:-10-08-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.30 0.23 0.015 0.024 0.20 0.27 0.03 0.07 0.02 0.47
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
22 °C
Actual 578 682 22.86 217 44 48 54 48.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099
EN-12680 II&IV Rev 05 ITP115002M JITENDRA BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
EN-1371 SP3,CP3,LP3,AP3 Rev 05 ITP115002M PRAMOD BK SINGH
7MT200720503 Rev 04
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
EN-1370 A3,B4,G2,H3,J2 Rev 05 ITP115002M VINOD BK SINGH
Rev 04
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-356
Date:-10-08-2020
COMPLIANCE CERTIFICATE
Report No-BSL-METSO-20-H-356
Date:-10-08-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.25 0.25 0.014 0.020 0.20 0.25 0.01 0.07 0.02 0.44
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 587 695 23.36 223 48 50 52 50.00
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404300-099
EN-12680 II&IV Rev 05 ITP115002M JITENDRA BK SINGH
7MT200720503 Rev 04
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099
Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404300-099
EN-1370 A3,B4,G2,H3,J2 Rev 05 ITP115002M VINOD BK SINGH
Rev 04
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-357
Date:-10-08-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.34 0.35 0.015 0.018 0.22 0.28 0.016 0.07 0.022 0.473
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 561 689 22.68 217 44 48 62 51.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
Rev 05
77082404310-099
BSL-D-H-14-08-2020 7MT2001017400 Rev ITP115002M VINODD BK SINGH
00
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404310-099
Rev 05
EN-12680 II&IV ITP115002M JITENDRA BK SINGH
Rev 00
7MT2001017400
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404310-099 Rev 05
EN-1369 LM3,SM3,AM3 Rev 00 ITP115002M MOHAN BK SINGH
7MT2001017400
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404310-099 Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT2001017400
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404310-099 Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT2001017400
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-FE-200
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.17-0.23 1.00-1.60 0.60 max 0.03 max 0.03 max 0.30 max 0.12 max 0.80 max 0.30 max 0.030 max 0.60 max
Actual 0.20 1.22 0.30 0.015 0.022 0.18 0.01 0.02 0.01 0.01 0.44
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 320 MIN 540 MIN 20.00 min 147-190 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-FE-201
COMPLIANCE CERTIFICATE Date: 25-07-2020
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.17-0.23 1.00-1.60 0.60 max 0.03 max 0.03 max 0.30 max 0.12 max 0.80 max 0.30 max 0.030 max 0.60 max
Actual 0.20 1.25 0.30 0.015 0.020 0.18 0.01 0.02 0.01 0.00 0.45
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 320 MIN 540 MIN 20.00 min 147-190 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
Rev .00
BSL/D/FE-25-07-2020 MM1042758 MM1042757 ITP215003M VINODD BK SINGH
Rev .00
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-FE-202
COMPLIANCE CERTIFICATE Date: 23-07-2020
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.17-0.23 1.00-1.60 0.60 max 0.03 max 0.03 max 0.30 max 0.12 max 0.80 max 0.30 max 0.030 max 0.60 max
Actual 0.21 1.30 0.34 0.016 0.022 0.18 0.01 0.02 0.02 0.01 0.47
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN
Specified 320 MIN 540 MIN 20.00 min 147-190 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev .00
BSL/D/FE-22-07-2020 MM1042758 MM1042757 ITP215003M VINODD BK SINGH
Rev .00
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-FE-203
COMPLIANCE CERTIFICATE Date: 25-08-2020
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.17-0.23 1.00-1.60 0.60 max 0.03 max 0.03 max 0.30 max 0.12 max 0.80 max 0.30 max 0.030 max 0.60 max
Actual 0.21 1.20 0.30 0.015 0.025 0.18 0.00 0.02 0.01 0.01 0.45
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 320 MIN 540 MIN 20.00 min 147-190 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features Drawing No Rev: Name of Inspector Approved
SCRATA PPS/ITP/PMCRS Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-FE-204
COMPLIANCE CERTIFICATE Date: 11-09-2020
Report No-BSL-METSO-20-FE-204
COMPLIANCE CERTIFICATE Date: 11-09-2020
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.17-0.23 1.00-1.60 0.60 max 0.03 max 0.03 max 0.30 max 0.12 max 0.80 max 0.30 max 0.030 max 0.60 max
Actual 0.21 1.30 0.34 0.017 0.024 0.25 0.004 0.023 0.005 0.02 0.48
MECHANICAL PROPERTIES
Specified 320 MIN 540 MIN 20.00 min 147-190 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Rev .01
BSL/D/FE-11-09-2020 MM0566853 MM0566852 Rev .01 ITP215006M VINODD BK SINGH
ULTRASONIC TEST - UT
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-17-B-01
Date:-07-12-2017
COMPLIANCE CERTIFICATE
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG
Actual 453 640 22.12 192 40 42 36 39.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77023508000 099 Rev 02
EN-1371 SP3,CP3,LP3,AP3 ITP11500M PRAMOD BK SINGH
7MT200719200 Rev 02
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on file and
available for review.
Report No-BSL-METSO-17-B-02
Date:-24-11-2017
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% Cu% CE%
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.33 0.88 0.33 0.02 0.027 0.23 0.016 0.030 0.031 0.53
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
Actual 460 643 21.02 192 30 38 34 34 18 °C
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-12680 II&IV Rev 02 ITP11500M JITENDRA BK SINGH
Rev 02
7MT200719200
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-1371 SP3,CP3,LP3,AP3 Rev 02 ITP11500M PRAMOD BK SINGH
Rev 02
7MT200719200
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-1370 A3,B4,G2,H3,J2 Rev 02 ITP11500M VINOD BK SINGH
Rev 02
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-17-B-03
COMPLIANCE CERTIFICATE Date:-05-01-2018
CHEMICAL COMPOSITION
Actual 0.29 1.28 0.31 0.017 0.024 0.11 0.004 0.026 0.039 0.004 0.53
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
18 °C
Actual 451 639 23.64 192 32 44 40 38.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-12680 II&IV Rev 02 ITP11500M JITENDRA BK SINGH
Rev 02
7MT200719200
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1369 LM3,SM3,AM3 ITP11500M MOHAN BK SINGH
7MT200719200 Rev 02
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-1371 SP3,CP3,LP3,AP3 Rev 02 ITP11500M PRAMOD BK SINGH
Rev 02
7MT200719200
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP11500M VINOD BK SINGH
7MT200719200 Rev 02
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-18-B-04
COMPLIANCE CERTIFICATE Date:-13-02-2018
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.30 0.28 0.015 0.020 0.18 0.010 0.040 0.05 0.01 0.56
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
Actual 460 639 22.42 192 30 36 34 33.33 18 °C
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 2
BSL-D-B-03022018 77023508000-099 7MT200719200 ITP11500M VINODD BK SINGH
Rev 2
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-12680 II&IV ITP11500M JITENDRA BK SINGH
Rev 02
7MT200719200
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1369 LM3,SM3,AM3 ITP11500M MOHAN BK SINGH
Rev 02
7MT200719200
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-1371 SP3,CP3,LP3,AP3 Rev 02 ITP11500M PRAMOD BK SINGH
7MT200719200 Rev 02
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features Drawing No Rev: Name of Inspector Approved
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP11500M VINOD BK SINGH
7MT200719200 Rev 02
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-18-B-05
COMPLIANCE CERTIFICATE Date:-13-02-2018
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.32 1.27 0.40 0.015 0.021 0.13 0.010 0.030 0.016 0.01 0.56
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
Actual 459 645 21.02 192 34 34 36 34.67 18 °C
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-12680 II&IV ITP11500M JITENDRA BK SINGH
7MT200719200 Rev 02
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1369 LM3,SM3,AM3 ITP11500M MOHAN BK SINGH
Rev 02
7MT200719200
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1371 SP3,CP3,LP3,AP3 ITP11500M PRAMOD BK SINGH
7MT200719200 Rev 02
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP11500M VINOD BK SINGH
Rev 02
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-18-B-06
Date:-28-02-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% Cu% V% CE%
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.32 1.50 0.29 0.017 0.023 0.18 0.020 0.050 0.023 0.01 0.62
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-12680 II&IV Rev 02 ITP11500M JITENDRA BK SINGH
7MT200719200 Rev 02
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-1371 SP3,CP3,LP3,AP3 Rev 02 ITP11500M PRAMOD BK SINGH
7MT200719200 Rev 02
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP11500M VINOD BK SINGH
Rev 02
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-18-B-07
Date:-12-04-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
Actual 446 639 22.12 187 40 42 38 40 21 °C
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP11500M VINOD BK SINGH
7MT200719200 Rev 02
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-18-B-08
Date:-19-04-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% Cu% V% CE%
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.33 1.31 0.31 0.021 0.027 0.13 0.010 0.040 0.028 0 0.58
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-12680 II&IV Rev 02 ITP11500M JITENDRA BK SINGH
7MT200719200 Rev 02
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1369 LM3,SM3,AM3 Rev 02 ITP11500M MOHAN BK SINGH
7MT200719200
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77023508000-099 Rev 02
EN-1371 SP3,CP3,LP3,AP3 ITP11500M PRAMOD BK SINGH
Rev 02
7MT200719200
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP11500M VINOD BK SINGH
7MT200719200 Rev 02
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-18-B-09
Date:-21-06-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% Cu% V% CE%
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.32 1.31 0.33 0.017 0.026 0.14 0.000 0.020 0.017 0 0.57
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-12680 II&IV ITP11500M JITENDRA BK SINGH
7MT200719200 Rev 02
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-1369 LM3,SM3,AM3 Rev 02 ITP11500M MOHAN BK SINGH
Rev 02
7MT200719200
PENETRANT TESTING - PT
77023508000-099
EN-1371 SP3,CP3,LP3,AP3 Rev 02 ITP11500M PRAMOD BK SINGH
7MT200719200 Rev 02
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099
EN-1370 A3,B4,G2,H3,J2 Rev 02 ITP11500M VINOD BK SINGH
Rev 02
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that documented evidence of such compliance is on
file and available for review.
Report No-BSL-METSO-18-B-10
Date:-21-06-2018
COMPLIANCE CERTIFICATE
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 2
BSL-D-B-19062018 77023508000-099 7MT200719200 Rev ITP11500M VINODD BK SINGH
2
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02
EN-12680 II&IV ITP11500M JITENDRA BK SINGH
Rev 02
7MT200719200
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1371 SP3,CP3,LP3,AP3 ITP11500M PRAMOD BK SINGH
7MT200719200 Rev 02
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02
EN-1370 A3,B4,G2,H3,J2 Rev 02 ITP11500M VINOD BK SINGH
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also
certify that documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-18-B-12
Date:-14-07-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.31 0.92 0.31 0.016 0.026 0.12 0.019 0.070 0.016 0.005 0.5
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02 Rev
EN-12680 II&IV 02 ITP11500M JITENDRA BK SINGH
7MT200719200
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1371 SP3,CP3,LP3,AP3 ITP11500M PRAMOD BK SINGH
Rev 02
7MT200719200
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-18-B-13
Date:-18-07-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.34 1.32 0.30 0.019 0.030 0.2 0.010 0.021 0.014 0.007 0.61
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
77023508000-099 Rev 2
BSL-D-B-14082018 Rev ITP11500M VINODD BK SINGH
7MT200719200 2
ULTRASONIC TEST - UT
77023508000-099
Rev 02 Rev
EN-12680 II&IV ITP11500M JITENDRA BK SINGH
7MT200719200 02
77023508000-099
EN-1369 LM3,SM3,AM3 Rev 02 ITP11500M MOHAN BK SINGH
Rev 02
7MT200719200
PENETRANT TESTING - PT
77023508000-099
EN-1371 SP3,CP3,LP3,AP3 Rev 02 ITP11500M PRAMOD BK SINGH
7MT200719200 Rev 02
VISUAL INSPECTION - VT
77023508000-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 Rev 02 ITP11500M VINOD BK SINGH
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-18-B-14
Date:-14-07-2018
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.31 1.33 0.34 0.017 0.024 0.13 0.003 0.025 0.014 0.003 0.56
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
Rev 2
BSL-D-B-08082018 77023508000-099 Rev ITP11500M VINODD BK SINGH
7MT200719200
2
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-15
Date:-16-05-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.32 0.32 0.019 0.030 0.14 0.009 0.029 0.024 0.007 0.55
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 464 693 23.82 207 44 40 54 46
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 2
BSL-D-B-01-04-2019 7MT200719200 Rev ITP11500M VINODD BK SINGH
2
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP11500M VINOD BK SINGH
Rev 02
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-16
Date:-16-05-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.10 0.33 0.023 0.027 0.14 0.001 0.014 0.015 0.003 0.51
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 462 689 23.48 207 46 40 54 46.67
DIMENSIONAL - DM
77023508000-099 Rev 2
BSL-D-B-02-03-2019 Rev ITP11500M VINODD BK SINGH
7MT200719200 2
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02 Rev
EN-12680 II&IV 02 ITP11500M JITENDRA BK SINGH
7MT200719200
PENETRANT TESTING - PT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP11500M VINOD BK SINGH
Rev 02
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-17
Date:-16-05-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.32 0.95 0.30 0.02 0.028 0.12 0.004 0.023 0.018 0.004 0.51
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
48 °C
Actual 452 659 22.75 187 42 56 46 48
DIMENSIONAL - DM
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-18
Date:-16-05-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.28 1.30 0.27 0.021 0.031 0.23 0.013 0.490 0.028 0.007 0.58
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
19 °C
Actual 482 690 23.15 207 40 48 56 48
DIMENSIONAL - DM
77023508000-099 Rev 2
BSL-D-B-12-03-2019 Rev ITP11500M VINODD BK SINGH
7MT200719200
2
ULTRASONIC TEST - UT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1371 SP3,CP3,LP3,AP3 ITP11500M PRAMOD BK SINGH
Rev 02
7MT200719200
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP11500M VINOD BK SINGH
Rev 02
7MT200719200
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-19
Date:-18-09-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.31 1.40 0.33 0.02 0.021 0.12 0.003 0.018 0.017 0.003 0.57
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 468 685 22.04 207 48 50 38 45.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
Rev 2
77023508000-099
BSL-D-B-20-09-2019 7MT200719200 Rev ITP11500M VINODD BK SINGH
2
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099
Rev 02 Rev
EN-12680 II&IV 02 ITP11500M JITENDRA BK SINGH
7MT200719200
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1371 SP3,CP3,LP3,AP3 ITP11500M PRAMOD BK SINGH
7MT200719200 Rev 02
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-20
Date:-18-09-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.02 0.34 0.021 0.025 0.14 0.004 0.017 0.021 0.008 0.5
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
22 °C
Actual 463 690 22.28 207 42 46 44 44
DIMENSIONAL - DM
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77023508000-099
Rev 02 Rev
EN-12680 II&IV 02 ITP11500M JITENDRA BK SINGH
7MT200719200
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77023508000-099 Rev 02
EN-1369 LM3,SM3,AM3 ITP11500M MOHAN BK SINGH
7MT200719200 Rev 02
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-19
Date:-18-09-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.32 1.29 0.31 0.016 0.019 0.11 0.001 0.014 0.0011 0.003 0.56
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
19 °C
Actual 502 698 21.33 187 44 38 56 46
DIMENSIONAL - DM
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-20
Date:-18-09-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.32 1.31 0.30 0.015 0.024 0.15 0.007 0.017 0.019 0.58
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 466 687 22.12 207 58 46 48 50.67
DIMENSIONAL - DM
77012504002-099 Rev2
BSL-D-B-21-09-2019 ITP115006M VINODD BK SINGH
7MT200720501 Rev 1
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77012504002-099 Rev 02
EN-1371 SP3,CP3,LP3,AP3 Rev 01 ITP115006M PRAMOD BK SINGH
7MT200720501
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-21
Date:-18-09-2019
COMPLIANCE CERTIFICATE
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.40 0.33 0.02 0.021 0.12 0.003 0.018 0.018 0.58
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 483 691 22.06 207 68 46 40 51.33
DIMENSIONAL - DM
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77012504002-099 Rev 02
EN-1370 A3,B4,G2,H3,J2 ITP115006M VINOD BK SINGH
Rev 01
7MT200720502
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-22
Date:-10-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.38 0.33 0.016 0.028 0.12 0.006 0.018 0.012 0.56
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 437 631 23.18 187 38 44 58 46.67
DIMENSIONAL - DM
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77012504003-099
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115006M PRAMOD BK SINGH
Rev 02
7MT200719300
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-23
Date:-10-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.32 1.21 0.28 0.02 0.022 0.12 0.009 0.019 0.021 0.007 0.55
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 432 647 21.92 187 42 46 58 48.67
DIMENSIONAL - DM
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-24
Date:-10-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.40 0.33 0.016 0.020 0.11 0.023 0.025 0.025 0.008 0.56
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 475 683 22.86 207 48 52 46 48.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
Rev.4
BSL-D-B-08-12-2019 77012504003-099 Rev ITP115006M VINODD BK SINGH
7MT200719300
2
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77012504003-099 Rev 04
EN-12680 II&IV ITP115006M JITENDRA BK SINGH
Rev 02
7MT200719300
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77012504003-099
Rev 04
EN-1371 SP3,CP3,LP3,AP3 Rev 02 ITP115006M PRAMOD BK SINGH
7MT200719300
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-25
Date:-10-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.30 1.27 0.28 0.02 0.028 0.17 0.017 0.024 0.07 0.006 0.56
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 449 661 13.84 197 48 44 52 48
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
Rev.4
BSL-D-B-04-12-2019 77012504003-099 Rev ITP115006M VINODD BK SINGH
7MT200719300
2
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-26
Date:-13-12-2019
COMPLIANCE CERTIFICATE
Report No-BSL-METSO-19-B-26
Date:-13-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.31 1.35 0.33 0.021 0.024 0.12 0.004 0.017 0.024 0.006 0.56
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
19 °C
Actual 459 665 22.76 197 40 58 50 49.33
DIMENSIONAL - DM
77012504002-099 Rev2
BSL-D-B-14-12-2019 7MT200720501 Rev 1 ITP115006M VINODD BK SINGH
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-27
Date:-13-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.25-0.35 0.70-1.75 0.20-1.00 0.04 Max 0.04 Max 0.25 Max 0.20 Max 0.50 Max 0.30 Max 0.65 Max
Actual 0.33 1.42 0.28 0.017 0.026 0.13 0.013 0.014 0.023 0.59
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 415 Min. 620 Min. 20.00 min 179-210 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 432 631 22.86 187 44 40 56 46.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77012504002-099 Rev2
BSL-D-B-14-12-2019 7MT200720501 Rev 1 ITP115006M VINODD BK SINGH
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77012504002-099
EN-1370 A3,B4,G2,H3,J2 Rev 02 ITP115006M VINOD BK SINGH
7MT200720502 Rev 01
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-343
Date:-13-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.32 0.37 0.02 0.024 0.18 0.300 0.033 0.085 0.59 0.479
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
18 °C
Actual 586 708 23.62 217 44 48 56 49.3
DIMENSIONAL - DM
77082404300-099 Rev 5
BSL-D-H-16-12-2019 7MT200720503 Rev 4 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-1371 SP3,CP3,LP3,AP3 ITP115002M PRAMOD BK SINGH
7MT200720503 Rev 04
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-344
Date:-13-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.40 0.33 0.018 0.029 0.24 0.300 0.017 0.08 0.016 0.49
MECHANICAL PROPERTIES
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
19 °C
Actual 598 704 23.64 217 36 56 48 46.67
DIMENSIONAL - DM
77082404331-099 Rev 1
BSL-D-H-10-12-2019 7MT201018300 Rev 0 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404331-099
Rev 01
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-B-346
Date:-08-01-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.21 0.34 0.02 0.021 0.22 0.280 0.027 0.07 0.036 0.46
MECHANICAL PROPERTIES
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 608 729 23.64 229 40 46 58 48
DIMENSIONAL - DM
MM0535964 Rev 1
BSL-D-H-27-12-2019 ITP115002M VINODD BK SINGH
MM0535972 Rev 1
ULTRASONIC TEST - UT
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
MM0535964
Rev 01
EN-1370 A3,B4,G2,H3,J2 ITP115002M VINOD BK SINGH
MM0535972 Rev 01
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-B-347
Date:-08-01-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.27 0.30 0.013 0.032 0.22 0.260 0.029 0.07 0.01 0.46
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 598 719 22.64 223 46 48 52 48.67
DIMENSIONAL - DM
MM0535964 Rev 1
BSL-D-H-27-12-2019 ITP115002M VINODD BK SINGH
MM0535972 Rev 1
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-B-348
Date:-08-01-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.40 0.33 0.018 0.017 0.25 0.290 0.025 0.08 0.006 0.49
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
22 °C
Actual 598 718 22.58 223 46 48 56 50.22
DIMENSIONAL - DM
MM0535964 Rev 1
BSL-D-H-28-12-2019 ITP115002M VINODD BK SINGH
MM0535972 Rev 1
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MM0535964
Rev 01
EN-1371 SP3,CP3,LP3,AP3 ITP115002M PRAMOD BK SINGH
MM0535972 Rev 01
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
MM0535964
EN-1370 A3,B4,G2,H3,J2 Rev 01 ITP115002M VINOD BK SINGH
Rev 01
MM0535972
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-B-348
Date:-08-01-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.40 0.33 0.018 0.017 0.25 0.290 0.025 0.08 0.006 0.49
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
18 °C
Actual 613 738 23.34 229 38 46 48 44
DIMENSIONAL - DM
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
MM0535964
EN-12680 II&IV Rev 01 ITP115002M JITENDRA BK SINGH
Rev 01
MM0535972
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MM0535964
EN-1369 LM3,SM3,AM3 Rev 01 ITP115002M MOHAN BK SINGH
MM0535972 Rev 01
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-B-349
Date:-15-01-2020
COMPLIANCE CERTIFICATE
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.27 0.30 0.013 0.029 0.22 0.026 0.029 0.07 0.01 0.46
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
18 °C
Actual 596 731 22.36 229 44 48 58 50.00
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MM0535964 Rev 1
BSL-D-H-11-01-2020 MM0535972 Rev 1 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MM0535964
EN-12680 II&IV Rev 01 ITP115002M JITENDRA BK SINGH
MM0535972 Rev 01
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MM0535964
Rev 01
EN-1371 SP3,CP3,LP3,AP3 Rev 01 ITP115002M PRAMOD BK SINGH
MM0535972
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
MM0535964
EN-1370 A3,B4,G2,H3,J2 Rev 01 ITP115002M VINOD BK SINGH
Rev 01
MM0535972
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-350
Date:-15-10-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.43 0.32 0.018 0.023 0.26 0.320 0.040 0.08 0.023 0.515
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 564 681 21.86 207 48 44 32 41.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099
Rev 01
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
7MT201018300 Rev 00
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099
EN-1371 SP3,CP3,LP3,AP3 Rev 01 ITP115002M PRAMOD BK SINGH
Rev 00
7MT201018300
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-351
Date:-15-10-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.40 0.44 0.016 0.018 0.23 0.300 0.028 0.083 0.017 0.489
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
18 °C
Actual 589 595 22.66 217 46 40 54 46.67
DIMENSIONAL - DM
77082404331-099 Rev 1
BSL-D-H-17-10-2019 7MT201018300 Rev 0 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099
Rev 01
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
7MT201018300 Rev 00
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099
EN-1371 SP3,CP3,LP3,AP3 Rev 01 ITP115002M PRAMOD BK SINGH
Rev 00
7MT201018300
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-352
Date:-15-10-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.40 0.33 0.018 0.029 0.24 0.300 0.017 0.08 0.016 0.49
MECHANICAL PROPERTIES
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
18 °C
Actual 572 686 23.14 207 38 42 36 38.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-1371 SP3,CP3,LP3,AP3 ITP115002M PRAMOD BK SINGH
7MT201018300 Rev 00
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-1370 A3,B4,G2,H3,J2 ITP115002M VINOD BK SINGH
7MT201018300 Rev 00
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-353
Date:-15-01-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.25 0.35 0.016 0.020 0.21 0.260 0.027 0.093 0.021 0.454
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 593 715 23.64 223 48 52 40 46.67
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
ULTRASONIC TEST - UT
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404300-099
Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-354
Date:-15-01-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.24 0.30 0.018 0.021 0.24 0.280 0.032 0.073 0.029 0.459
MECHANICAL PROPERTIES
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 586 709 22.64 217 42 50 54 48.67
DIMENSIONAL - DM
77082404300-099 Rev 5
BSL-D-H-13-01-2020 7MT200720503 Rev 4 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
PENETRANT TESTING - PT
VISUAL INSPECTION - VT
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-355
Date:-25-11-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.34 0.33 0.015 0.022 0.22 0.300 0.043 0.075 0.022 0.487
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
18 °C
Actual 696 738 21.64 229 44 52 38 44.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 1
BSL-D-H-27-11-2019 7MT201018300 Rev 0 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-12680 II&IV Rev 00 ITP115002M JITENDRA BK SINGH
7MT201018300
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 00
7MT201018300
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099 Rev 01
EN-1371 SP3,CP3,LP3,AP3 ITP115002M PRAMOD BK SINGH
7MT201018300 Rev 00
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404331-099
EN-1370 A3,B4,G2,H3,J2 Rev 01 ITP115002M VINOD BK SINGH
7MT201018300 Rev 00
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-356
Date:-25-11-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.32 0.37 0.02 0.024 0.18 0.300 0.033 0.085 0.059 0.479
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 693 731 23.4 229 54 46 44 48.00
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099 Rev 01
EN-12680 II&IV Rev 00 ITP115002M JITENDRA BK SINGH
7MT201018300
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099
Rev 01
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 00
7MT201018300
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099
Rev 01
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT201018300
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099
Rev 01
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-357
Date:-25-11-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.29 0.33 0.019 0.020 0.22 0.290 0.022 0.085 0.019 0.477
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 561 689 21.96 223 44 46 52 47.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 5
BSL-D-H-29-11-2019 7MT200720503 Rev 4 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-12680 II&IV Rev 04 ITP115002M JITENDRA BK SINGH
7MT200720503
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099 Rev 05
EN-1371 SP3,CP3,LP3,AP3 ITP115002M PRAMOD BK SINGH
7MT200720503 Rev 04
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404300-099
Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-358
Date:-25-11-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.25 0.30 0.014 0.020 0.24 0.300 0.018 0.08 0.017 0.465
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
19 °C
Actual 562 676 23.02 217 58 42 46 48.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099 Rev 05
EN-12680 II&IV Rev 04 ITP115002M JITENDRA BK SINGH
7MT200720503
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099
Rev 05
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-359
Date:-11-11-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.28 0.31 0.016 0.020 0.22 0.290 0.033 0.09 0.013 0.456
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
22 °C
Actual 597 719 23.46 229 50 48 42 46.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404326-099 Rev 04
EN-12680 II&IV Rev 00 ITP115002M JITENDRA BK SINGH
7MT200900800
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404326-099
Rev 04
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 00
7MT200900800
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404326-099
Rev 04
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT200900800
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404326-099
Rev 04
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT200900800
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-360
Date:-03-11-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.40 0.33 0.018 0.028 0.24 0.300 0.017 0.08 0.016 0.49
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
22 °C
Actual 576 697 23.8 217 44 56 42 47.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 5
BSL-D-H-05-11-2019 ITP115002M VINODD BK SINGH
7MT200720503 Rev 4
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-12680 II&IV ITP115002M JITENDRA BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099 Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-361
Date:-03-11-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.34 0.33 0.015 0.022 0.22 0.300 0.043 0.075 0.022 0.487
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 596 711 23.9 217 40 48 38 42.00
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 5
BSL-D-H-05-11-2019 ITP115002M VINODD BK SINGH
7MT200720503 Rev 4
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-12680 II&IV ITP115002M JITENDRA BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099 Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-362
Date:-03-11-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.32 0.28 0.018 0.020 0.22 0.300 0.032 0.075 0.013 0.428
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
19 °C
Actual 586 684 22.62 207 42 48 38 42.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099 Rev 01
EN-12680 II&IV Rev 00 ITP115002M JITENDRA BK SINGH
7MT201018300
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099
Rev 01
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 00
7MT201018300
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099
Rev 01
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT201018300
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099
Rev 01
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-363
Date:-03-11-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.25 0.25 0.019 0.018 0.24 0.310 0.034 0.077 0.015 0.467
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
18 °C
Actual 583 691 21.56 217 40 48 50 46.00
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099 Rev 01
EN-12680 II&IV Rev 00 ITP115002M JITENDRA BK SINGH
7MT201018300
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099
Rev 01
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 00
7MT201018300
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099
Rev 01
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT201018300
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099
Rev 01
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-364
Date:-03-11-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.11 1.28 0.31 0.014 0.017 0.22 0.300 0.035 0.082 0.013 0.447
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 591 705 22.96 223 52 40 50 47.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 1
BSL-D-H-06-11-2019 ITP115002M VINODD BK SINGH
7MT201018300 Rev 0
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-12680 II&IV ITP115002M JITENDRA BK SINGH
Rev 00
7MT201018300
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT201018300
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099 Rev 01
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-H-365
Date:-11-11-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.32 0.28 0.018 0.020 0.22 0.300 0.032 0.075 0.013 0.428
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
22 °C
Actual 585 708 21.96 223 46 60 42 49.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099 Rev 05
EN-12680 II&IV Rev 04 ITP115002M JITENDRA BK SINGH
7MT200720503
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099
Rev 05
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-H-366
Date:-11-11-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.11 1.28 0.30 0.014 0.017 0.22 0.300 0.035 0.082 0.013 0.447
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
18 °C
Actual 587 711 23.54 229 34 40 42 38.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 5
BSL-D-H-13-11-2019 ITP115002M VINODD BK SINGH
7MT200720503 Rev 4
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-12680 II&IV ITP115002M JITENDRA BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099 Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-H-367
Date:-11-11-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.11 1.28 0.30 0.014 0.017 0.22 0.300 0.035 0.082 0.013 0.447
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 592 729 22.38 232 38 44 48 43.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099 Rev 05
EN-12680 II&IV Rev 04 ITP115002M JITENDRA BK SINGH
7MT200720503
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099
Rev 05
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-B-368
Date:-11-11-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.30 0.34 0.015 0.020 0.23 0.300 0.027 0.075 0.032 0.482
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
19 °C
Actual 583 687 23.14 207 44 48 50 47.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 1
BSL-D-H-13-11-2019 ITP115002M VINODD BK SINGH
7MT201018300 Rev 0
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-12680 II&IV ITP115002M JITENDRA BK SINGH
Rev 00
7MT201018300
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT201018300
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099 Rev 01
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-H-369
Date:-09-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.26 0.31 0.015 0.020 0.16 0.320 0.045 0.08 0.022 0.466
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
19 °C
Actual 581 701 21.56 217 48 40 52 46.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 5
BSL-D-H-10-12-2019 ITP115002M VINODD BK SINGH
7MT200720503 Rev 4
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-12680 II&IV ITP115002M JITENDRA BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099 Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-19-H-370
Date:-05-12-2019
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.34 0.33 0.015 0.022 0.22 0.300 0.043 0.075 0.022 0.487
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 564 658 22.54 217 50 44 46 46.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 5
BSL-D-H-06-12-2019 ITP115002M VINODD BK SINGH
7MT200720503 Rev 4
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-12680 II&IV ITP115002M JITENDRA BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099 Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-371
Date:-24-01-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.12 1.25 0.32 0.014 0.016 0.23 0.300 0.035 0.08 0.013 0.445
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
22 °C
Actual 588 719 22.64 229 38 44 48 43.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404310-099 Rev 07
EN-12680 II&IV Rev 00 ITP115002M JITENDRA BK SINGH
7MT201017400
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404310-099
Rev 07
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 00
7MT201017400
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404310-099
Rev 07
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT201017400
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404310-099
Rev 07
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT201017400
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-372
Date:-24-01-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.28 0.29 0.015 0.020 0.23 0.300 0.020 0.083 0.018 0.478
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 590 718 22.64 223 40 58 48 48.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099 Rev 05
EN-12680 II&IV Rev 04 ITP115002M JITENDRA BK SINGH
7MT200720503
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099
Rev 05
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-373
Date:-24-01-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.25 0.35 0.016 0.020 0.21 0.260 0.027 0.093 0.021 0.454
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 593 715 23.64 223 48 52 40 46.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099 Rev 05
EN-12680 II&IV Rev 04 ITP115002M JITENDRA BK SINGH
7MT200720503
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099
Rev 05
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-374
Date:-27-01-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.25 0.26 0.017 0.024 0.21 0.280 0.020 0.076 0.014 0.464
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 592 722 23.64 229 40 58 46 48.00
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099 Rev 05
EN-12680 II&IV Rev 04 ITP115002M JITENDRA BK SINGH
7MT200720503
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099
Rev 05
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-375
Date:-27-01-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.32 0.29 0.012 0.016 0.22 0.290 0.017 0.066 0.04 0.479
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 589 728 21.54 229 44 58 42 48.00
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099 Rev 05
EN-12680 II&IV Rev 04 ITP115002M JITENDRA BK SINGH
7MT200720503
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099
Rev 05
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 04
7MT200720503
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099
Rev 05
EN-1370 A3,B4,G2,H3,J2 Rev 04 ITP115002M VINOD BK SINGH
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-B-376
Date:-27-01-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.26 0.26 0.017 0.024 0.20 0.280 0.020 0.076 0.014 0.463
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
22 °C
Actual 595 721 22.32 229 58 48 42 49.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099 Rev 01
EN-12680 II&IV Rev 00 ITP115002M JITENDRA BK SINGH
7MT201018300
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099
Rev 01
EN-1369 LM3,SM3,AM3 ITP115002M MOHAN BK SINGH
Rev 00
7MT201018300
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099
Rev 01
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT201018300
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099
Rev 01
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-B-377
Date:-27-01-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.45 0.29 0.015 0.022 0.23 0.290 0.019 0.08 0.01 0.504
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 591 726 21.84 223 38 48 62 49.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 1
BSL-D-H-30-01-2020 ITP115002M VINODD BK SINGH
7MT201018300 Rev 0
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-12680 II&IV ITP115002M JITENDRA BK SINGH
Rev 00
7MT201018300
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT201018300
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099 Rev 01
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-378
Date:-25-01-2020
COMPLIANCE CERTIFICATE
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.26 0.31 0.015 0.020 0.16 0.320 0.045 0.08 0.022 0.466
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 595 718 23.64 217 44 54 46 48.00
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 1
BSL-D-H-17-01-2020 7MT201018300 Rev 0 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099 Rev 01
EN-12680 II&IV ITP115002M JITENDRA BK SINGH
7MT201018300 Rev 00
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099 Rev 01
EN-1371 SP3,CP3,LP3,AP3 ITP115002M PRAMOD BK SINGH
7MT201018300 Rev 00
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features Drawing No Rev: Name of Inspector Approved
SCRATA PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-1370 A3,B4,G2,H3,J2 ITP115002M VINOD BK SINGH
Rev 00
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-379
Date:-25-01-2020
COMPLIANCE CERTIFICATE
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.26 0.26 0.017 0.024 0.2 0.280 0.020 0.076 0.014 0.463
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 592 725 23.82 229 52 44 40 45.33
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099
Rev 01
EN-12680 II&IV Rev 00 ITP115002M JITENDRA BK SINGH
7MT201018300
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-1369 LM3,SM3,AM3 Rev 00 ITP115002M MOHAN BK SINGH
7MT201018300
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099
Rev 01
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT201018300
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-1370 A3,B4,G2,H3,J2 ITP115002M VINOD BK SINGH
Rev 00
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-380
Date:-24-02-2020
COMPLIANCE CERTIFICATE
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.30 0.35 0.015 0.021 0.22 0.280 0.018 0.085 0.016 0.48
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
22 °C
Actual 596 723 21.64 229 42 50 44 45.33
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
MM0535964 Rev 1
BSL-D-H-05-02-2020 MM0535972 Rev 1 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MM0535964
EN-12680 II&IV Rev 01 ITP115002M JITENDRA BK SINGH
MM0535972 Rev 01
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MM0535964
Rev 01
EN-1369 LM3,SM3,AM3 Rev 01 ITP115002M MOHAN BK SINGH
MM0535972
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
MM0535964
EN-1371 SP3,CP3,LP3,AP3 Rev 01 ITP115002M PRAMOD BK SINGH
MM0535972 Rev 01
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
MM0535964
Rev 01
EN-1370 A3,B4,G2,H3,J2 ITP115002M VINOD BK SINGH
MM0535972 Rev 01
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-381
Date:-27-02-2020
COMPLIANCE CERTIFICATE
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.11 1.33 0.31 0.013 0.020 0.23 0.290 0.021 0.072 0.015 0.45
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 588 719 23.64 223 48 52 40 46.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MM0535964 Rev 1
BSL-D-H-10-02-2020 MM0535972 Rev 1 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MM0535964
EN-12680 II&IV Rev 01 ITP115002M JITENDRA BK SINGH
MM0535972 Rev 01
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MM0535964
Rev 01
EN-1369 LM3,SM3,AM3 Rev 01 ITP115002M MOHAN BK SINGH
MM0535972
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
MM0535964
EN-1371 SP3,CP3,LP3,AP3 Rev 01 ITP115002M PRAMOD BK SINGH
MM0535972 Rev 01
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
MM0535964
Rev 01
EN-1370 A3,B4,G2,H3,J2 ITP115002M VINOD BK SINGH
MM0535972 Rev 01
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-382
Date:-24-02-2020
COMPLIANCE CERTIFICATE
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.33 0.30 0.013 0.020 0.23 0.290 0.020 0.072 0.015 0.47
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 591 715 23.64 223 44 40 38 40.67
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
MM0535964 Rev 1
BSL-D-H-05-02-2020 ITP115002M VINODD BK SINGH
MM0535972 Rev 1
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MM0535964
Rev 01
EN-12680 II&IV Rev 01 ITP115002M JITENDRA BK SINGH
MM0535972
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MM0535964
EN-1369 LM3,SM3,AM3 Rev 01 ITP115002M MOHAN BK SINGH
Rev 01
MM0535972
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
MM0535964
Rev 01
EN-1371 SP3,CP3,LP3,AP3 ITP115002M PRAMOD BK SINGH
MM0535972 Rev 01
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
MM0535964 Rev 01
EN-1370 A3,B4,G2,H3,J2 ITP115002M VINOD BK SINGH
MM0535972 Rev 01
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-383
Date:-13-02-2020
COMPLIANCE CERTIFICATE
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.12 1.31 0.32 0.015 0.019 0.25 0.310 0.020 0.08 0.03 0.463
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 585 701 21.64 217 36 48 42 42.00
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
UT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404310-099
EN-12680 II&IV Rev 07 ITP115002M JITENDRA BK SINGH
Rev 00
7MT201017400
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404310-099 Rev 07
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT201017400
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404310-099
Rev 07
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT201017400
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-384
Date:-17-02-2020
COMPLIANCE CERTIFICATE
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.25 0.26 0.017 0.024 0.20 0.280 0.020 0.076 0.014 0.462
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
19 °C
Actual 578 685 22.64 217 42 50 48 46.67
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-12680 II&IV Rev 00 ITP115002M JITENDRA BK SINGH
7MT201018300
MP Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099
EN-1369 LM3,SM3,AM3 Rev 01 ITP115002M MOHAN BK SINGH
7MT201018300 Rev 00
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099
Rev 01
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT201018300
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features Drawing No Rev: Name of Inspector Approved
SCRATA PPS/ITP/PMCRS Deviation Number
77082404331-099
EN-1370 A3,B4,G2,H3,J2 Rev 01 ITP115002M VINOD BK SINGH
7MT201018300 Rev 00
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-385
Date:-17-02-2020
COMPLIANCE CERTIFICATE
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.12 1.26 0.29 0.018 0.020 0.21 0.300 0.014 0.09 0.016 0.452
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 573 685 22.36 207 44 48 38 43.33
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099 Rev 1
BSL-D-H-31-01-2020 ITP115002M VINODD BK SINGH
7MT201018300 Rev 0
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099
Rev 01
EN-12680 II&IV Rev 00 ITP115002M JITENDRA BK SINGH
7MT201018300
MAGNETIC PARTICLE INSPECTION - MP
Quality document Number Conditional Approval
MP Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-1369 LM3,SM3,AM3 Rev 00 ITP115002M MOHAN BK SINGH
7MT201018300
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099 Rev 01
EN-1371 SP3,CP3,LP3,AP3 ITP115002M PRAMOD BK SINGH
7MT201018300 Rev 00
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features Drawing No Rev: Name of Inspector Approved
SCRATA PPS/ITP/PMCRS Deviation Number
77082404331-099
Rev 01
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-386
Date:-17-02-2020
COMPLIANCE CERTIFICATE
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.12 1.26 0.29 0.018 0.020 0.21 0.300 0.014 0.09 0.016 0.452
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
22 °C
Actual 598 725 23.64 229 38 56 44 46.00
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 1
BSL-D-H-03-02-2020 ITP115002M VINODD BK SINGH
7MT201018300 Rev 0
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-12680 II&IV ITP115002M JITENDRA BK SINGH
Rev 00
7MT201018300
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099
Rev 01
EN-1371 SP3,CP3,LP3,AP3 Rev 00 ITP115002M PRAMOD BK SINGH
7MT201018300
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-387
Date:-May-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.12 1.28 0.34 0.014 0.018 0.23 0.310 0.010 0.08 0.01 0.458
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 578 702 23.68 223 44 48 56 49.33
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 1
BSL-D-H-04-08-2020 ITP115002M VINODD BK SINGH
7MT201018300 Rev 0
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099
Rev 01
EN-12680 II&IV Rev 00 ITP115002M JITENDRA BK SINGH
7MT201018300
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404331-099
EN-1371 SP3,CP3,LP3,AP3 Rev 01 ITP115002M PRAMOD BK SINGH
7MT201018300 Rev 00
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404331-099 Rev 01
EN-1370 A3,B4,G2,H3,J2 Rev 00 ITP115002M VINOD BK SINGH
7MT201018300
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-388
Date:-Mar-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.30 0.35 0.014 0.021 0.22 0.280 0.020 0.09 0.02 0.48
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
22 °C
Actual 582 717 23.86 229 38 46 58 47.33
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
Rev 01
BSL-D-H-03-03-2020 MM0535972 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 01
EN-12680 II&IV MM0535972 ITP115002M JITENDRA BK SINGH
MAGNETIC PARTICLE INSPECTION - MP
Quality document Number Conditional Approval
MP Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
Rev 01
EN-1371 SP3,CP3,LP3,AP3 MM0535972 ITP115002M PRAMOD BK SINGH
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
Rev 01
EN-1370 A3,B4,G2,H3,J2 7MM0535972 ITP115002M VINOD BK SINGH
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-389
Date:-Mar-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.30 0.35 0.014 0.021 0.22 0.280 0.020 0.09 0.02 0.48
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 591 721 22.12 229 46 52 54 50.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 01
EN-12680 II&IV MM0535972 ITP115002M JITENDRA BK SINGH
MAGNETIC PARTICLE INSPECTION - MP
Quality document Number Conditional Approval
MP Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
Rev 01
EN-1369 LM3,SM3,AM3 MM0535972 ITP115002M MOHAN BK SINGH
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-390
Date:-Mar-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.30 0.35 0.015 0.021 0.22 0.280 0.020 0.09 0.02 0.48
MECHANICAL PROPERTIES
Hardness
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 587 705 22.82 223 40 58 54 50.67
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 01
EN-12680 II&IV MM0535972 ITP115002M JITENDRA BK SINGH
MAGNETIC PARTICLE INSPECTION - MP
Quality document Number Conditional Approval
MP Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
Rev 01
EN-1369 LM3,SM3,AM3 MM0535972 ITP115002M MOHAN BK SINGH
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-391
Date:-Mar-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.12 1.30 0.32 0.014 0.021 0.24 0.300 0.020 0.07 0.01 0.46
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 583 712 22.86 217 44 52 40 45.33
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 01
BSL-D-H-02-03-2020 MM0535972 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
EN-12680 II&IV MM0535972 Rev 01 ITP115002M JITENDRA BK SINGH
Rev 01
EN-1369 LM3,SM3,AM3 MM0535972 ITP115002M MOHAN BK SINGH
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
Rev 01
EN-1370 A3,B4,G2,H3,J2 7MM0535972 ITP115002M VINOD BK SINGH
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-392
Date:-May-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.32 0.37 0.02 0.024 0.18 0.300 0.030 0.08 0.05 0.477
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
22 °C
Actual 591 721 21.64 229 40 38 58 48.67
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
77082404300-099 Rev 5
BSL-D-H-18-03-2020 7MT200720503 Rev 4 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
77082404300-099
Rev 05
EN-12680 II&IV Rev 04 ITP115002M JITENDRA BK SINGH
7MT200720503
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-1371 SP3,CP3,LP3,AP3 Rev 04 ITP115002M PRAMOD BK SINGH
7MT200720503
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
77082404300-099 Rev 05
EN-1370 A3,B4,G2,H3,J2 ITP115002M VINOD BK SINGH
Rev 04
7MT200720503
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-393
Date:-Jun-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.12 1.30 0.35 0.016 0.021 0.23 0.029 0.020 0.08 0.02 0.46
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
18 °C
Actual 571 696 22.62 217 42 48 54 48.00
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 01
BSL-D-H-18-06-2020 MM0535972 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 01
EN-1371 SP3,CP3,LP3,AP3 MM0535972 ITP115002M PRAMOD BK SINGH
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-394
Date:-Jun-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.12 1.30 0.32 0.015 0.019 0.25 0.031 0.020 0.08 0.03 0.47
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 588 725 23.26 223 46 62 42 50.00
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
Rev 01
BSL-D-H-18-06-2020 MM0535972 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 01
EN-12680 II&IV MM0535972 ITP115002M JITENDRA BK SINGH
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
Rev 01
EN-1371 SP3,CP3,LP3,AP3 MM0535972 ITP115002M PRAMOD BK SINGH
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-395
Date:-May-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.32 0.30 0.018 0.023 0.24 0.290 0.050 0.03 0.02 0.477
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 593 722 23.6 223 74 94 90 86.00
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 01
BSL-D-H-23-05-2020 MM0592628 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 01
EN-12680 II&IV MM0592628 ITP115002M JITENDRA BK SINGH
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
Rev 01
EN-1371 SP3,CP3,LP3,AP3 MM0592628 ITP115002M PRAMOD BK SINGH
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-396
Date:-May-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.13 1.29 0.34 0.011 0.020 0.23 0.280 0.020 0.08 0.03 0.467
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 585 708 22.68 217 70 98 92 89.33
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
Rev 01
BSL-D-H-23-05-2020 MM0592628 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 01
EN-1371 SP3,CP3,LP3,AP3 MM0592628 ITP115002M PRAMOD BK SINGH
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-397
Date:-May-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.25 0.26 0.017 0.024 0.2 0.280 0.020 0.08 0.01 0.462
MECHANICAL PROPERTIES
Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
Parameters Y.S. Mpa T.S. Mpa %EL %R.A.
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
21 °C
Actual 592 724 23.58 223 76 92 96 88.00
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 01
BSL-D-H-29-02-2020 MM0592628 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 01
EN-12680 II&IV MM0592628 ITP115002M JITENDRA BK SINGH
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
Rev 01
EN-1371 SP3,CP3,LP3,AP3 MM0592628 ITP115002M PRAMOD BK SINGH
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-H-398
Date:-Feb-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.15 Max 1.20-1.50 0.60 Max 0.03 Max 0.03 Max 0.30 Max 0.20-0.40 0.40 Max 0.050-0.100 0.30 Max 0.60 Max
Actual 0.14 1.28 0.32 0.016 0.023 0.24 0.320 0.027 0.091 0.034 0.488
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 500 Min. 600 Min. 18.00 min 200-250 S1 S2 S3 AVG TEMP20 °C ± 2 °C
20 °C
Actual 586 718 22.84 217 78 86 98 87.33
DIMENSIONAL - DM
Quality document Number Conditional Approval
Dimensional Report Number Drawing Number Rev: Name of Inspector Approved
PPS/ITP/PMCRS Deviation Number
Rev 01
BSL-D-H-13-01-2020 MM0592628 ITP115002M VINODD BK SINGH
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
Rev 01
EN-1369 LM3,SM3,AM3 MM0592628 ITP115002M MOHAN BK SINGH
PENETRANT TESTING - PT
Quality document Number Conditional Approval
PT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
Rev 01
EN-1371 SP3,CP3,LP3,AP3 MM0592628 ITP115002M PRAMOD BK SINGH
VISUAL INSPECTION - VT
Surface Features Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
SCRATA PPS/ITP/PMCRS Deviation Number
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.
Report No-BSL-METSO-20-RE-77
Date:- Feb-2020
COMPLIANCE CERTIFICATE
CHEMICAL COMPOSITION
Elements C% Mn% Si% S% P% Cr% Mo% Ni% V% Cu% CE%
Specified 0.17-0.23 1.00-1.60 0.60 max 0.03 max 0.03 max 0.30 max 0.12 max 0.80 max 0.30 max 0.030 max 0.60 max
Actual 0.21 1.20 0.30 0.015 0.025 0.18 0.00 0.02 0.01 0.01 0.45
MECHANICAL PROPERTIES
Parameters Y.S. Mpa T.S. Mpa %EL %R.A. Hardness IMPECT TEST (J) AT TEMPERATURE (20°c) ±2°c
BHN
Specified 320 MIN 540 MIN 20.00 min 147-190 S1 S2 S3 AVG TEMP20 °C ± 2 °C
DIMENSIONAL - DM
Dimensional Report Number Drawing Number Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MM1183939 Rev 01
BSL-D-RE-30-01-2020 Rev ITP215003M VINODD BK SINGH
MM1183938
01
ULTRASONIC TEST - UT
Quality document Number Conditional Approval
UT Standard Number Acceptance Criteria Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
MM1183939
Rev 01
EN-12680 II&IV Rev 01 ITP215003M JITENDRA BK SINGH
MM1183938
PENETRANT TESTING - PT
PT Standard Number Acceptance Criteria Drawing No Rev: Quality document Number Name of Inspector Approved Conditional Approval
PPS/ITP/PMCRS Deviation Number
MM1183939
EN-1371 SP3,CP3,LP3,AP3 Rev 01 ITP215003M PRAMOD BK SINGH
Rev 01
MM1183938
VISUAL INSPECTION - VT
Acceptance Criteria Quality document Number Conditional Approval
Surface Features SCRATA Drawing No Rev: PPS/ITP/PMCRS Name of Inspector Approved Deviation Number
MM1183939 Rev 01
EN-1370 A3,B4,G2,H3,J2 Rev 01 ITP215003M VINOD BK SINGH
MM1183938
I affirm that the samples represented by this report are representative of our parts. I also certify that
documented evidence of such compliance is on file and available for review.