Professional Documents
Culture Documents
Brochure B1500 All Fire Pumps PDF
Brochure B1500 All Fire Pumps PDF
FIRE PUMPS
Horizontal Split-Case,
Vertical Turbine, In-Line
and End Suction
NOTE: For detailed information on selection, Peerless Pump houses are designed and manufactured to high standards of quality in materials,
performance ratings and dimensions of Peerless construction and workmanship. Peerless Pump houses are constructed in accordance with the
fire pump products and systems refer to Brochure requirements of UL, ULC, FM, NFPA13, NFPA20, and MBMA. All housed fire pump packaged systems
B-1510, B-1530, or RAPID: offer the following advantages:
Rapid Access to Pump Information and Design ➤ Complete unit responsibility ➤ Reduced unit installation cost
➤ State of the art engineering designs ➤ Value-added service for customer
➤ Worldwide technical and commercial support ➤ Single source supplier
2
Horizontal Fire In-Line Fire Pumps, End Suction Fire Vertical Fire Pumps
Pumps, UL Listed, UL and ULC Listed Pumps, UL Listed UL Listed, ULC
ULC Listed and FM and FM Approved Listed and FM
Approved Approved
Horizontal centrifugal pumps Compact in-line centrifugal End suction centrifugal fire Vertical turbine pumps with
with appropriate fittings for fire pumps with appropriate pumps with appropriate appropriate fittings for
providing water supply to fire fittings for providing water fittings for providing water providing water supply to fire
Type protection systems in supply to fire protection supply to fire protection protection systems in
buildings, plants and yards. systems in buildings, plants systems in buildings, plants buildings, plants and yards.
Types AF, ADF, AEF, TUF, and yards. Type PVF. and yards. Type UNF.
TUTF.
250 to 5,000 gpm 50 to 500 gpm Up to 1,500 gpm 250 to 5,000 gpm
Capacities
(57 to 1,136 m3/hr) (11 to 114 m3/hr) (114 m3/hr) (57 to 1,136 m3/hr)
Up to 800 hp (597 kW) Up to 75 hp (56 kW) Up to 75 hp (56 kW) Up to 600 hp (448 kW)
Horsepower
Horizontal electric motors, Vertical close coupled Horizontal electric motors Vertical electric motors and
diesel engines, and steam electric motors. and diesel engines. diesel engines with right
Drives
turbines. angle gears, and steam
turbines.
Ambient within the limits for Ambient within the limits for Ambient within the limits for Up to 115°F (46°C)
Temperature satisfactory equipment satisfactory equipment satisfactory equipment
operation. operation. operation.
Cast iron, bronze fitted as Cast iron, bronze fitted. Cast iron, bronze fitted. Cast iron, bronze fitted as
Materials of standard. Optional materials standard. Optional materials
Construction available for sea water available for sea water
applications. applications.
For additional Brochure B-1510 Brochure B-1510 Brochure F-1900 Brochure B-1510
information (selection tables) (selection tables) Brochure B-1510 (selection tables)
request (selection tables)
3
Accessories
To meet the recommendations of the standards of the National Fire valves, hose valve caps and chains, suction and discharge gauges,
Protection Association as published in their Pamphlet 20, current relief valve, automatic air release valve, flowmeter, and ball drip valve.
edition, certain accessories are required for all fire pump installations. No matter what the requirements, Sterling has a complete line of
They will vary, however, to fit the needs of each individual installation accessories available and can satisfy the requirements of each
and the requirements of the local insurance authorities. Sterling installation.
provides a wide range of fire pump fittings which include: concentric The charts reproduced below graphically illustrate the many
discharge increaser, casing relief valve, eccentric suction reducer, accessories as well as the optional drives that are available with all
increasing discharge tee, overflow cone, hose valve head, hose Peerless fire pumps and packaged systems.
Building
Hose Valve
Cap & Chain
Automatic Air
Release Valve Discharge
Gauge
Nipple Hose TO
Compound Type Valve
Horizontal Suction Gauge
Valve HOSE
Elbow
Steam Turbine TO Elbow Outside Hose Valve Head
Relief Valve
WASTE Drain Valve (number of hose valves is variable)
Gauge Protector
(some high Casing
pressure applications) Enclosed TO
FROM Relief
Cone WASTE
Valve
WATER (flanged)
SUPPLY TO
WASTE
TO WASTE
Valve Eccentric Tee (with back pressure)
Suction Reducer OR
Tee Valve Flow Meter Valve
SUPPLY
TEST LINE PIPE AND FITTINGS
TO SYSTEM
Diesel Engine Horizontal Concentric Discharge Increaser Check Valve Tee Valve
Electric Motor (when discharge tee not used)
Building
Automatic Air Release Valve
(fittings and flange for engine Cap & Chain
or steam turbine drive) TO
HOSE
Nipple Hose
Vertical Valve
Horizontal Valve
Electric Elbow Outside Hose Valve Head
Steam Turbine
Motor Relief Valve (number of hose valves is variable)
Right Tee
Angle Drain Valve
Gear Discharge
Gauge Enclosed
Cone TO
(flanged) WASTE
TO
TO WASTE WASTE
Diesel Engine DISCHARGE (with back pressure)
Column
(threaded or ASSEMBLY Tee OR
Tee Valve Flow Meter Valve
flanged) SUPPLY
TEST LINE PIPE AND FITTINGS
Discharge Bowl
(threaded or flanged)
Water Level Testing Device
Extend to Strainer
Intermediate Bowls
(well installation only)
TO SYSTEM
Bell Suction
Basket Strainer FROM Concentric Discharge Increaser Check Valve Tee Valve
(sump installation) WATER SUPPLY (when discharge tee not used)
Brochure B-1500 The content of this brochure is subject to change without notice. © Copyright 2000 by Sterling Fluid Systems (USA), Inc. Printed in U.S.A.