Professional Documents
Culture Documents
31. ZQSC(ENTER)
QSC:0(ENTER)
QSC:0,UNL;(ENTER)
Command to change physical
address
ZQSC(ENTER)
QSC:1(ENTER)
QSC:1,UNL;(ENTER)
32. ZQLG(ENTER)
QLG:0(ENTER)
QLG:0;X2(ENTER)
QLG:0:X25:UNL;(ENTER)
Command to change
linkage
ZQLG(ENTER)
QLG:1(ENTER)
QLG:1;X2(ENTER)
QLG:1:X25:UNL;(ENTER)
Comment- If the X.25 link of BSC is locked from remote end the this command is
used to unlock the X.25 link from local BSC end. Then both the command (28,29)
should be executed
BL-PWR :: ZEFO:2;
EFM:2:BBU
EFM:2:BBU=ALL ;
NEED TO SET ALL