Professional Documents
Culture Documents
ZEEI:BCF=163;
ZEQS:BTS=188:L; SECTOR LOCK
ZEQE:BTS=188:AHOP=N,HOP=N; ENABLE DISABLE ANTENNA HOPING MODE CHANGE
ZEQS:BTS=188:U; SECTOR LOCK
ZEEI:BCF=163;
EEI:BCF=29;
EOL:29;
ERO:BTS=125; IF DAP:N then GTRX : N then , if DAP:no then GTRX : Y
DTI:::PCM=870;check to check LAPD of particular E1
DTC:T029A:BL; LAPD BLOCK
DTC:T029A:WO; LAPD DE-BLOCK
***********************************************************************
There is disturbance in the serial DL bus or bus is broken :: HARDWARE ISSUE
ESMA System module has lost connection to EXxx TRX module :: HARDWARE
ZDSB:::PCM=113; :: ET CONFIGRATION
**************************************************
TRE DELETION CREATION
ZQWL:BCF=17;
ZQWA:BCF=17:TRE=3:2847:;
********************ET WORKING>>>>>>>>>>>>>>>>
ZUSI:ET;
ZUSI:ET,192;
ZUSC:ET,192:SE;
ZUSC:ET,192:TE;
ZUSC:ET,192:WO;
*************************************
ACTIVITY::
Please find the attach sheet for Updated remarks for TCH Unavailability.
A. 17-Case- High Temperature Alarm reflect since Last 3-4 days(Date & time Logs
mentioned in sheet ), due to Which TRX stuck in BL_RSL, After given reset it got
restored but again reached in RSL. So that Need to Look after from Circle end to
clear Alarm.
B. 2-Case--- ESMA System module has lost connection to EXxx TRX module
Action required :---ESMA port need changed
C. 2-Case�CFR 80-90%
Traffic checked,
Action required:---CNT cable check/TRX need to swap/BB2F cehck/
ZQUE:BCF=150,TRE=2:1:"4,20,3":;