Professional Documents
Culture Documents
Hydraulic Solenoid Control Box - 2 PDF
Hydraulic Solenoid Control Box - 2 PDF
1
HYDRAULIC SOLENOID CONTROL BOX
c. Remove filter element from housing
and follow cleaning instructions as
described below:
2
HYDRAULIC SOLENOID CONTROL BOX
7. Re-install cleaned filter element or install REPAIR
new filter element in filter head, ensure to
lubricate new O-ring with clean system fluid. Coil Replacement
11. Ensure filter minder indicator is GREEN 1. Remove all hydraulic pressure from the
vehicle hydraulic system.
3
HYDRAULIC SOLENOID CONTROL BOX
Solenoid Valve Cartridge Replacement Pressure Reducing Valve Replacement
Pressure
Reducing Valve
Solenoid
Valve Coil
2. Remove all electrical power from the spray Adjustment Stem Jam Nut
system.
3. Open solenoid control box cover and mark 1. Remove all hydraulic pressure from the
coil wire locations. vehicle hydraulic system.
8. Reinstall coil and torque retaining nut to 6. Install new pressure reducing valve.
4 - 6 ft lbs. (6-8 nm).
4
HYDRAULIC SOLENOID CONTROL BOX
7. Install in-line pressure gauge on one of the
spray head close port to observe system
pressure for adjustment of the pressure
reducing valve.
5
HYDRAULIC SOLENOID CONTROL BOX