This document provides instructions for adjusting the gray level and printer speed of a scanner/printer unit using the SET and LF buttons. The instructions explain how to make the scanner consume less power by setting the gray level lighter or the printer speed lower. Pressing the SET and LF buttons in a specific sequence will bring up menus to set the gray level from 1-12 or set the printer speed to low, medium, or high.
This document provides instructions for adjusting the gray level and printer speed of a scanner/printer unit using the SET and LF buttons. The instructions explain how to make the scanner consume less power by setting the gray level lighter or the printer speed lower. Pressing the SET and LF buttons in a specific sequence will bring up menus to set the gray level from 1-12 or set the printer speed to low, medium, or high.
This document provides instructions for adjusting the gray level and printer speed of a scanner/printer unit using the SET and LF buttons. The instructions explain how to make the scanner consume less power by setting the gray level lighter or the printer speed lower. Pressing the SET and LF buttons in a specific sequence will bring up menus to set the gray level from 1-12 or set the printer speed to low, medium, or high.
Follow the steps to adjust gray:Set it lighter to consume less power.
1. Press SET button, Switch on the scanner, The printer will show“PRESS SET BUTTON TO SET”, release button 2. Press SET button again,till it shows“4 PRESS LF TO SET GRAY”on the printing paper 3. Press LF Button,it will show“GRAY=X” on the paper,the bigger of figure, the darker of the printing, the darkest is 12. Set it to lower to consume less power. 4. Press SET button to confirm the darkness,start the scanner with new setting of darkness. Follow the steps to set printer speed:Set it lower to consume less power. 1. Press Set Button, switch the scanner, it will show “ PRESS SET BUTTON TO SET” Release the button 2. Press SET button again till it shows“5 PRESS LF TO SET SPEED” 3. Press LF button, it will show“SPEED:X” on the paper ,it can be set to “LOW”、 “HIGH”、 or “MEDIUM” 4. Press SET to confirm,restart the scanner with new setting.