Professional Documents
Culture Documents
Attached contents.
2.6 Language
2.1 Clock/Contrast
2.8 ABC tuning
1 of 5 page
Item Procedure Monitor Display
2,6 Language 1, Firstly Key Off-position,
No.1
メインコントローラ P/N
3,
言語・ロゴ
By "up" or "down" key, サービス調整1
工場初期セット
bring a cursor to 言語・ロゴ(top line).
Language Selection
ENG English CHN Chinese ITA Italian VNM Vetnamnese
JPN Japanese IDN Indonesian DEU German MMR Miyammer
ISO Europe THI Thai ESP Spanish TAM Tamil
USA A. English FRA French MYS Malysian POR Potgese
Note: After and during adjustment, key brings to the first screen.
2 of 5 page
Item Procedure Monitor display
2,1 Clock/Contrast 1, When time is shown and engine key is at
22:00
ON position.
2, Press enter key for displaying
SWITCH STATUS
"SWITCH STATUS, CLOCK/CONTRAST" CLOCK/CONTRAST
3,
SWITCH STATUS
By pressing "up" or "down" key, CLOCK/CONTRAST
display.
5,
ADJUST
By pushing "up" or "down" key, ADJUST CONTRACT
Note: After and during adjustment, key brings to the first screen.
3 of 5 page
Item Procedure Monitor display
Note: Before tuning, heat hydraulic oil up to 50℃. Switch off A/C.
Note: For immediate cancellation, switch off engine key.
Power adj
3, Start engine.
MEMORY ENG
Press "enter" key,
display shows "engine adj" FINISH ENG
it starts auto adjustment.
MEMORY PUMP
After unload valve tuning, auto adjustment
finishes. and returns to original screen. FINISH PUMP
4 of 5 page
Item Procedure Monitor display
2,34 Pressure release. 1, Firstly key switch is OFF position. Then
No.1
hold buzzer stop key pressed and MAIN
CONTROLLE
turn the key to ON position. R P/N
Monitor displays SERVICE DIAG 1. SERVICE
8 Lever operation.
FAILED
Lower the attachment on ground and release RELEASE
all pressure in motoro and cylinders by lever
operation.
When failed, Fail Press will show.
9 Finish by Key switch OFF position in either case
succeeded or failed.
5 of 5 page