MECHANICAL ENGINEERING 2K17 Course Title : FLUID MECHANICS‐II (3,1)
DEPARTMENT Section : A+B Lab Instructor : Muhammad Aqib
LAB PROJECT ANSYS BASED ANALYSIS SUBMISSION DATE : 11/03/19 NOTE: Following Data should be submitted 1.Geometery File 2.Ansys File 3.Report in thesis formate G No. Name Reg No. Project title. 1 Amin Ul Hasnat (Uet/Scet‐17F‐ME‐001) * Examine the effect of drag and lift forces on a model () in ansys fluent and subsonic wind tunel apparatus using different angles 2 Syed Zulkiful (Uet/Scet‐17F‐ME‐055) * HM 170.01 Drag body sphere 3 Azhar Mir Hussain (Uet/Scet‐17F‐ME‐018) * https://www.gunt.de/en/products/fluid‐mechanics/flow‐around‐bodies/pressure‐and‐velocity‐profiles/drag‐body‐sphere/070.17001/hm170‐01/glct‐1:pa‐148:ca‐786:pr‐770 4 1 Wahab Ali (Uet/Scet‐17F‐ME‐023) 5 Aqib Jameel (Uet/Scet‐17F‐ME‐047) 6 Mujtaba Hassan (Uet/Scet‐17F‐ME‐004) 7 Yaseen Hayat (Uet/Scet‐17F‐ME‐028) 1 Muzaffar Niaz (UET/SCET‐17F‐ME‐015) * Examine the effect of drag and lift forces on a model () in ansys fluent and subsonic wind tunel apparatus using different angles 2 M. Mudassir Hayat (UET/SCET‐17F‐ME‐041) * HM 170.02 Drag body hemisphere 3 Javid Khan (UET/SCET‐17F‐ME‐046) * https://www.gunt.de/en/products/fluid‐mechanics/flow‐around‐bodies/pressure‐and‐velocity‐profiles/drag‐body‐hemisphere/070.17002/hm170‐02/glct‐1:pa‐148:ca‐786:pr‐771 4 2 Mohsin Raza (UET/SCET‐17F‐ME‐044) 5 Rashid Abbas (UET/SCET‐17F‐ME‐035) 6 M.Haseeb Javed (UET/SCET‐17F‐ME‐030) 7 Muhammad Saeed (UET/SCET‐17F‐ME‐012) 1 Zeeshan Khan (UET/SCET‐17F‐ME‐053) * Examine the effect of drag and lift forces on a model () in ansys fluent and subsonic wind tunel apparatus using different angles 2 Zia Ullah (UET/SCET‐17F‐ME‐076) * HM 170.14 Lift body aerofoil NACA 4415 3 M. Bilal (UET/SCET‐17F‐ME‐072) * https://www.gunt.de/en/products/fluid‐mechanics/flow‐around‐bodies/pressure‐and‐velocity‐profiles/lift‐body‐aerofoil‐naca‐54118/070.17013/hm170‐13/glct‐1:pa‐148:ca‐786:pr‐1672 4 3 Mursaleen (UET/SCET‐17F‐ME‐062) * For Coordinates : http://airfoiltools.com/airfoil/details?airfoil=naca4415‐il 5 Waleed Khan (UET/SCET‐17F‐ME‐068) 6 Abuzar Ghaffari (UET/SCET‐17F‐ME‐040) 7 Maaz Noor (UET/SCET‐17F‐ME‐032) 1 Ma Ullah (UET/SCET‐17F‐ME‐060) * Examine the effect of drag and lift forces on a model () in ansys fluent and subsonic wind tunel apparatus using different angles 2 Muhammad A que (UET/SCET‐17F‐ME‐038) * HM 170.04 Drag body circular ring 3 Shayan Ahmad (UET/SCET‐17F‐ME‐051) * https://www.gunt.de/en/products/fluid‐mechanics/flow‐around‐bodies/pressure‐and‐velocity‐profiles/drag‐body‐circular‐ring/070.17004/hm170‐04/glct‐1:pa‐148:ca‐786:pr‐773 4 4 Syed M.Osama (UET/SCET‐17F‐ME‐020) 5 Faizan Ahmad (UET/SCET‐17F‐ME‐011) 6 Amish Sudais (UET/SCET‐17F‐ME‐058) 7 Arslan Ahmad (UET/SCET‐17F‐ME‐036) 1 M.Nouman Arif (UET/SCET‐17F‐ME‐006) * Examine the effect of drag and lift forces on a model () in ansys fluent and subsonic wind tunel apparatus using different angles 2 Muhammad Umer (UET/SCET‐17F‐ME‐024) * HM 170.08 Drag body streamline body 3 Usama Saleem (UET/SCET‐17F‐ME‐026) * https://www.gunt.de/en/products/fluid‐mechanics/flow‐around‐bodies/pressure‐and‐velocity‐profiles/drag‐body‐streamline‐body/070.17008/hm170‐08/glct‐1:pa‐148:ca‐786:pr‐777 5 4 M. Asad Ullah (UET/SCET‐17F‐ME‐010) 5 Kamran Shehzad (UET/SCET‐17F‐ME‐033) 6 M.Taha Najam (UET/SCET‐17F‐ME‐042) 1 Abdullah (UET/SCET‐17F‐ME‐021) * Examine the effect of drag and lift forces on a model () in ansys fluent and subsonic wind tunel apparatus using different angles 2 Syed M.Zohair (UET/SCET‐17F‐ME‐022) * HM 170.10 Drag body paraboloid 3 Muhammad Talha (UET/SCET‐17F‐ME‐019) * https://www.gunt.de/en/products/fluid‐mechanics/flow‐around‐bodies/pressure‐and‐velocity‐profiles/drag‐body‐paraboloid/070.17010/hm170‐10/glct‐1:pa‐148:ca‐786:pr‐779 6 4 Irfan Mansoor (UET/SCET‐17F‐ME‐008) 5 Abdul Qadeer (UET/SCET‐17F‐ME‐013) 6 Afzal Ahmad (UET/SCET‐17F‐ME‐059) MECHANICAL ENGINEERING 2K17 Course Title : FLUID MECHANICS‐II (3,1) DEPARTMENT Section : A+B Lab Instructor : Muhammad Aqib LAB PROJECT ANSYS BASED ANALYSIS SUBMISSION DATE : 11/03/19 NOTE: Following Data should be submitted 1.Geometery File 2.Ansys File 3.Report in thesis formate G No. Name Reg No. Project title. 1 Faisal Basheer (UET/SCET‐17F‐ME‐057) * Examine the effect of drag and lift forces on a model () in ansys fluent and subsonic wind tunel apparatus using different angles 2 M. Zeeshan Baber (UET/SCET‐17F‐ME‐071) * HM 170.07 Drag body cylinder 3 M. Usman Ali (UET/SCET‐17F‐ME‐050) * https://www.gunt.de/en/products/fluid‐mechanics/flow‐around‐bodies/pressure‐and‐velocity‐profiles/drag‐body‐cylinder/070.17007/hm170‐07/glct‐1:pa‐148:ca‐786:pr‐776 7 4 M. Shahab Ullah (UET/SCET‐17F‐ME‐027) 5 Muhammad Tayyab (UET/SCET‐17F‐ME‐029) 6 M. Waqar Ahmad (UET/SCET‐17F‐ME‐016) 1 Rakib Khan (UET/SCET‐17F‐ME‐034) * Examine the effect of drag and lift forces on a model () in ansys fluent and subsonic wind tunel apparatus using different angles 2 M. Ibrar Bukhsh (UET/SCET‐17F‐ME‐037) * HM 170.11 Drag body concave shape 3 Mehmood Naeem (UET/SCET‐17F‐ME‐054) * https://www.gunt.de/en/products/fluid‐mechanics/flow‐around‐bodies/pressure‐and‐velocity‐profiles/drag‐body‐concave‐shape/070.17011/hm170‐11/glct‐1:pa‐148:ca‐786:pr‐780 8 4 Osama Ali (UET/SCET‐17F‐ME‐073) 5 Amir Zada (UET/SCET‐17F‐ME‐005) 6 Abdul Faheem Shah (UET/SCET‐17F‐ME‐065) 1 A f Niaz (UET/SCET‐17F‐ME‐007) * Examine the effect of drag and lift forces on a model () in ansys fluent and subsonic wind tunel apparatus using different angles 2 Hamza Khan (UET/SCET‐17F‐ME‐009) * HM 170.09 Lift body aerofoil NACA 0015 3 M. Haris Sethi (UET/SCET‐17F‐ME‐066) * https://www.gunt.de/en/products/fluid‐mechanics/flow‐around‐bodies/pressure‐and‐velocity‐profiles/lift‐body‐aerofoil‐naca‐0015/070.17009/hm170‐09/glct‐1:pa‐148:ca‐786:pr‐778 4 9 Ahsan Ali (UET/SCET‐17F‐ME‐045) * For Coordinates : http://airfoiltools.com/airfoil/details?airfoil=naca0015‐il 5 Farhan Ullah (UET/SCET‐17F‐ME‐043) 6 Sohail Ahmad Khan (UET/SCET‐17F‐ME‐031) 7 Muzammil Abbas (UET/SCET‐17F‐ME‐003) 1 Shahzad Hussain (UET/SCET‐17F‐ME‐025) * Examine the effect of drag and lift forces on a model () in ansys fluent and subsonic wind tunel apparatus using different angles 2 Asif Nawaz (UET/SCET‐17F‐ME‐002) * HM 170.06 Lift body flag 3 Al‐Asad Shah (UET/SCET‐17F‐ME‐039) * https://www.gunt.de/en/products/fluid‐mechanics/flow‐around‐bodies/pressure‐and‐velocity‐profiles/lift‐body‐flag/070.17006/hm170‐06/glct‐1:pa‐148:ca‐786:pr‐775 10 4 Muhammad Faisal (UET/SCET‐17F‐ME‐049) 5 Sadam Hussain (UET/SCET‐17F‐ME‐048) 6 Asad irshad (UET/SCET‐17F‐ME‐074) 1 Taimoor Amin (UET/SCET‐17F‐ME‐069) * Examine the effect of drag and lift forces on a model () in ansys fluent and subsonic wind tunel apparatus using different angles 2 Irfan Ali (UET/SCET‐17F‐ME‐067) * HM 170.03 Drag body circular disc 3 Muhammad Hanan (UET/SCET‐17F‐ME‐017) * https://www.gunt.de/en/products/fluid‐mechanics/flow‐around‐bodies/pressure‐and‐velocity‐profiles/drag‐body‐circular‐disc/070.17003/hm170‐03/glct‐1:pa‐148:ca‐786:pr‐772 11 4 Zahin Ullah (UET/SCET‐17F‐ME‐063) 5 Ziaullah (UET/SCET‐17F‐ME‐061) 6 Tariq Ullah Khan (UET/SCET‐17F‐ME‐052)