Professional Documents
Culture Documents
HWT up to 6300A
Tailored ACB types and associated accessories
The ACB is delivered factory assembled. Various data can be displayed on LCD:
• Phase current (A) of I1, I2, I3 and their max. peak current
• Line voltage (V) of V12, V23, V31 and their max. peak voltage
(or Phase voltage (V) of V1N, V2N, V3N and their peak voltage)
• Demand active power max. (kW)
• Power factor (cos Ø)
• Electric energy (kWh)
• Frequency (Hz)
• Trip history
The complete data can be displayed via the cummunication module as well.
Standard over-current
2 6
Terminal blocks
Are positioned to allow easy release with
wiring/access to: adjustment dial
• Control circuit • Ground fault trip function
• Auxiliary switches • Neutral protection
• Position switches • Tripping display
• Coil voltage display
Enhanced over-current
3 7
Auxiliaries
• Under-voltage trip device release with
• Motorised control and LCD-“Analyser”
closing coil Same features as standard over-
current release with LCD, plus:
• Undervoltage alarm
• Contact temperature monitoring
4
“Double break”
8
Standard over-current
• Double circuit current breaking release with LCD-“Ammeter”
• 50% reduced arc voltage plus additional features:
• Contacts increase service life • Tripping display for type of tripping
• Extremely fast interruption of • Pre-trip alarm
short circuit currents • Phase rotation protection
• Data exchange via Modbus RTU
• Ammeter
Air Circuit Breakers
HWT up to 6300A
Implementation
• Easy connection in the switchboard thanks to 3 types of main
circuit terminal arrangements:
- Front connection to save space in depth
- vertical and / or horizontal rear connections for busbars.
• The draw-out type allows visible breaking on the “Isolated”
position (NFC14-100). The “Test” position allows to test the ACB
while having all the control circuits connected.
• The main circuit safety shutters automatically conceal the main
circuit contacts on the draw-out cradle when the ACB is drawn out.
- The top and bottom shutters operate independently and can be
separately padlocked in the closed position.
- Up to three padlocks (with ø6 hasp) can be installed on each side
using padlocking unit. (Padlock not supplied)
3.108
Air Circuit Breakers
HWT up to 6300A
The range
• 3 sizes up to 6300A
• 2 width up to 4000A
• 3P and 4P with neutral on the left
• Standard breaking capacity (S) 65, 85 and 120kA and high
level capacity (H) 80 and 100kA according to the size
• One single mounting depth for fixed type
• Same cut-out on front panel for all the sizes.
Technical characteristics
Main Incomers
Reference HWT208S/ HWT212H/ HWT325S/ HWT316H/ HWT440SB HWT650S/
HWT212S/ HWT216H/ HWT332S HWT320H/ HWT663S
HWT216S/ HWT220H HWT325H/
HWT220S HWT332H
Ics = Icu breaking capacity in case of short-circuit
(kA, symmetrical peak 690V 50 55 65 85 85 85
current value) 440V 65 80 85 100 100 120
400/415V 65 80 85 100 100 120
Icm rated short-circuit breaking current
(kA, asymmetrical peak 690V 105 121 143 187 187 187
current value) 440V 143 176 187 220 220 264
400/415V 143 176 187 220 220 264
Icw rated short time withstand current
(kA r.m.s) 1 second 65 80 85 100 100 120
3 seconds 50 55 65 75 85 85
No of operating cycles
Mechanical life (with maintenance) 30000 30000 20000 20000 15000 10000
Mechanical life (without maintenance) 15000 15000 10000 10000 8000 5000
Electrical life (with maintenance AC 460V) 12000 12000 7000 7000 3000 1000
Electrical life (without maintenance AC 690V) 10000 10000 5000 5000 2500 500
Time
Max. opening time (sec.) 0,03 0,03 0,03 0,03 0,03 0,03
Max. spring charging time (sec.) 10 10 10 10 10 10
Max. closing time (sec.) 0,08 0,08 0,08 0,08 0,08 0,08
Dimensions
Fixed type (mm) width 3P 360 360 466 466 - -
width 4P 445 445 586 586 - -
height 460 460 460 460 - -
depth 290 290 290 290 - -
Draw-out type (mm) width 3P 354 354 460 460 460 799
width 4P 439 439 580 580 580 1034
height 460 460 460 460 460 460
depth 345 345 345 345 345 380
The following values are the same for all the sizes : Standards :
Rated operational voltage Ue (50/60Hz) - 690V CEI 60947-2
AC rated insulation voltage Ui (50/60Hz) - 1000V EN 60947-2
Rated impulse withstand voltage Uimp - 12 kV
3.109