Professional Documents
Culture Documents
Note:
The short designations (ACExC1 . . .etc.) are self-explanatory
All wiring diagrams listed below are available with electrical connection KP
Without fieldbus
ACExC0: Basic version according to price list ACEx 01.1
AUMATIC without position feedback signal
Reversing contactors, OPEN - STOP - CLOSE - EMERGENCY (24 V DC), 6 programmable signal relays1)
ACP E3FC-2P0CA-001 KMS TP200/001
ACExC1: (ExC stands for explosion-proof version ATEX-IIC)
AUMATIC with position feedback signal 0/4 – 20 mA (potentiometer in actuator),
Reversing contactors, OPEN - STOP - CLOSE - EMERGENCY (24 V DC), 6 programmable signal relays 1)
ACP E3FC-2P0CA-002 KMS TP202/001
ACExC2:
AUMATIC with positioner and position feedback signal 0/4 – 20 mA (potentiometer in actuator),
contactors, OPEN - STOP - CLOSE - EMERGENCY - MODE (24 V DC), nominal value (0/4 – 20 mA),
6 programmable signal relays1)
ACP E3FC-2P0AA-003 KMS TP202/001
ACExC1N: (N stands for Non-Intrusive)
AUMATIC with position feedback/torque feedback signal 0/4 – 20 mA (MWG in actuator),
Reversing contactors, OPEN - STOP - CLOSE - EMERGENCY (24 V DC), 6 programmable signal relays1)
ACP E3FC-2M0CA-004 KMS TP280/001
ACExC2N:
AUMATIC with positioner and position feedback/torque feedback signal 0/4 – 20 mA (MWG in actuator),
Reversing contactors, OPEN - STOP - CLOSE - EMERGENCY - MODE (24 V DC), nominal value (0/4 – 20 mA),
6 programmable signal relays1)
ACP E3FC-2M0AA-005 KMS TP280/001
ACExC1NW: (W stands for wall bracket)
AUMATIC with position feedback/torque feedback signal 0/4 – 20 mA (MWG in actuator),
wall bracket
Reversing contactors, OPEN - STOP - CLOSE - EMERGENCY (24 V DC), 6 programmable signal relays1)
ACP D3FC-2M0CA-004 KMS TP280/001
Profibus DP
ACExC2DP: (DP stands for Profibus DP), Basic version according to price list ACEx 01.1 Fieldbus
AUMATIC Profibus DP with position feedback signal (potentiometer in actuator),
Reversing contactors, OPEN - STOP - CLOSE, nominal value (0 – 100 %)
ACP E3FC-2P0--S000 KMS TP202/001
ACExC2NDP: (N stands for Non-Intrusive)
AUMATIC Profibus DP with position feedback/torque feedback signal (MWG in actuator),
Reversing contactors, OPEN - STOP - CLOSE, nominal value (0 – 100 %)
ACP E3FC-2M0--S000 KMS TP280/001
1) Standard configuration: Collective fault signal, end position CLOSED, end position OPEN, selector switch REMOTE,
torque fault CLOSE, torque fault OPEN.
We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.
1/3
Issue 1.09
Y002.867/004/en
Contents Selection of wiring diagrams for AUMATIC ACExC
Modbus RTU
ACExC2MB: (MB stands for Modbus RTU), Basic version according to price list ACEx 01.1 Fieldbus
AUMATIC Modbus RTU with position feedback signal (potentiometer in actuator),
Reversing contactors, OPEN - STOP - CLOSE, nominal value (0 – 100 %)
ACP E3FC-2P0--K000 KMS TP202/001
ACExC2NMB: (N stands for Non-Intrusive)
AUMATIC Modbus RTU with position feedback/torque feedback signal (MWG in actuator),
Reversing contactors, OPEN - STOP - CLOSE, nominal value (0 – 100 %)
ACP E3FC-2M0--K000 KMS TP280/001
DeviceNet
ACExC2DEV: (DEV stands for DeviceNet), Basic version according to price list ACEx 01.1 Fieldbus
AUMATIC DeviceNet with position feedback signal (potentiometer in actuator),
Reversing contactors, OPEN - STOP - CLOSE, nominal value (0 – 100 %)
ACP E3FC-2P0--E000 KMS TP202/001
ACExC2NDEV: (N stands for Non-Intrusive)
AUMATIC DeviceNet with position feedback/torque feedback signal (MWG in actuator),
Reversing contactors, OPEN - STOP - CLOSE, nominal value (0 – 100 %)
ACP E3FC-2M0--E000 KMS TP280/001
Foundation Fieldbus
ACExC2FF: Basic version according to price list ACEx 01.1 Fieldbus (FF stands for Foundation Fieldbus)
AUMATIC Foundation Fieldbus with position feedback signal (potentiometer in actuator),
Reversing contactors, OPEN - STOP - CLOSE, nominal value (0 – 100 %)
ACP E3FC-2P0--B000 KMS TP202/001
ACExC2NFF: (N stands for Non-Intrusive)
AUMATIC Foundation Fieldbus with position feedback/torque feedback signal (MWG in actuator),
Reversing contactors, OPEN - STOP - CLOSE, nominal value (0 – 100 %)
ACP E3FC-2M0--B000 KMS TP280/001
We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.
2/3
Issue 1.09
Y002.867/004/en
Selection of wiring diagrams for AUMATIC ACExC Contents
Digit ACP E 3 F C - 2 P 0 C A - 0 0 1
E = Basic version
1
D = AUMATIC on wall bracket
E = DeviceNet
B = Foundation Fieldbus
12 0 = Basic version
13 0 = Basic version
1 = Basic version, potentiometer in actuators; inputs: OPEN - STOP - CLOSE - EMERGENCY; outputs: 6 signal relays
2 = Basic version; inputs: OPEN - STOP - CLOSE - EMERGENCY; outputs: 6 signal relays,
position feedback signal 0/4 – 20 mA
3 = Version with positioner, potentiometer in actuator; inputs: OPEN - STOP - CLOSE - EMERGENCY - MODE
0/4 – 20 mA; outputs: 6 signal relays, position feedback 0/4 – 20 mA
14
4 = Basic version, MWG in actuator; inputs: OPEN - STOP - CLOSE - EMERGENCY; outputs: 6 signal relays,
torque feedback signal 0/4 – 20 mA
5 = Version with positioner, MWG in actuator; inputs: OPEN - STOP - CLOSE - EMERGENCY - MODE
0/4 – 20 mA; outputs: 6 signal relays, position feedback signal 0/4 – 20 mA, torque feedback signal
0/4 – 20 mA
0 = Bus version
We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.
3/3
Issue 1.09
Y002.867/004/en