Professional Documents
Culture Documents
I n d u s tri a l m e t a l d e t e ct o r s d e s i g n e d t o pr o t e ct a w i d e
r a n g e o f m a chi n e r y f r o m d a m a g i n g “ tr a mp ” m e t a l s
Metalarm m e t a l d e t e ct o r s
2
Model TR tr o u g h e d c o n v e y o r s
Model BR tr o u g h e d c o n v e y o r s
3
Model PL flat belt conveyors
DETECTOR
SEARCH COIL
Note: Cut away portion of
conveyor slider plate is only BELT
3mm larger than search coil
4 Method of Installing Search Coil
Model VC vibr a t o r y c o n v e y o r s
F e a t u r e s & a pp l ic a ti o n s :
• No need to install a long metal–free section.
At most, a 3.3' (1 m) cut–out in the base of the
conveyor is all that is needed
• Ease of installation – no support
framework required
• No ‘product compensation’ required – pulse
induction electronics do not need such controls.
The result is a savings in labor and material
• Protection - To detect tramp metal in vibratory
feeders and protect crushers, granulators,
chippers, etc. from damage
• Quality Control - To check that products being
fed by vibratory feeders prior to packing are not
contaminated with metal
Specifications
Features & A F Model No. HH-10
s p e ci f ic a ti o n s : HAND-HELD
METAL DETECTOR
in mm
• Electronics pre-set at the factory DETECT
A 3.35 85
B ON
indicators C
G
C 9.29 236
6
Control Units
All Metalarm Control Units employ proven ‘pulse induction’ The maximum cable length for the Model TR, BR and VC
technology circuitry, and are mounted on a single printed Metal Detectors equipped with either a 3500 or 3500/
circuit board to give high reliability and easy access for QM2 Control is 66-feet. The maximum cable length for
servicing. All controls, other than the front door reset the Model PL Metal Detector with a 3500 or 3500/QM2
switch and ‘on’ lamp, are mounted on printed circuit Control is 32.8-feet (9997.44 mm). On the Model PL2 Metal
boards for the same reason. All optional functions are Detector, the maximum cable length is 32.8-feet
switchable for ease of set up. Plug–in connectors are (9997.44 mm).
used for ease of installation and servicing.
The Metalarm 3500 control is the standard unit for
Eriez manufactures a wide range of search coils for installation where no metal belt splice exists. The Metalarm
use with a Model 3500, 3500/QM2, and 6600 control. 3500/QM2 control is similarly designed for use in harsh
All Metalarm search coils are fully screened, reducing environments, and can be used with conveyor belts that are
unwanted emissions. The coil has a plug–in connection joined by metal belt clips. The 3500/QM2 is designed to
and is linked to the control unit by means of coaxial cable. detect larger pieces of metal when the metal is on top of
the clips, and the sensitivity level has been reduced.
Specifications
Models 3500 & 3500/QM2
NEMA 4 carbon steel - beige paint finish (Model 3500)
Housing
NEMA 4X stainless steel. (Model 3500/QM2)
15.75 x 13.75 x 6.0 in
Dimensions
(400 x 350 x 150 mm)
Weight 17.6 lbs (8 kg)
Mounting Four corner - wall mounting
115/230V, 50/60Hz. Four Form C relay contact outputs rated at 5A/250VAC
Electronics
“Detect” and “Power On” lamps as well as a 10 segment LED signal display supplied as standard
Model 6600
Housing NEMA 4
10.24 x 5.5 x 3.27 in
Dimensions
(260 x 140 x 83 mm)
Weight 3.9 lbs (1.79 kg)
115/230V, 50/60Hz operation - field switchable
Two Form C relay contact outputs rated at 5A/250VAC
Electronics
Visual alarm - metal detected
Reset switch
Interconnection Cables
Cable type Coaxial type RG 58
Model TR and BR: 66 feet (max.)
Standard length Model PL and VC: 16 feet (max.)
Model PL2: 3 feet (max.)
Exterior alarms Multiple alarm register
Bag dropper system Single delay circuit
Auxiliary Equipment
Ink jet marker system Constant voltage transformer
Flag drop marker system Trip counter
Dimensions and specifications are subject to change without notice.
NOTE: Some safety warning labels or guarding may have been removed before photographing equipment.
7
Engineering Services and Technical Center
a t Eri e z
Eri e z pr o vi d e s E n g i n e e ri n g S e rvic e s t o c o v e r a w i d e
r a n g e o f f u n cti o n s , a s s i s t a n c e , a n d s u pp o rt
• Design and equipment modifications incorporating specific
features and options. The separator may incorporate
various options and features applicable to the process.
• Equipment layout and dimensional drawings. Modifications
are common to fit an existing plant or provide specific
operating characteristics.
• Equipment selection, sizing, material flows and balances.
Eriez has a database for accurate separator sizing and
separation performance.
• In-plant audit to determine iron contamination levels,
production flow rates, material handling aspects,
equipment selection and sizing, and predict performance.
Eriez and Eriez Magnetics are registered trademarks of Eriez Manufacturing Co, Erie, PA ©2016 Eriez Magnetics All Rights Reserved
Manufacturing Facilities: AUSTRALIA • BRAZIL • CANADA • CHINA • INDIA • JAPAN • MEXICO • SOUTH AFRICA • UNITED KINGDOM • UNITED STATES