Professional Documents
Culture Documents
Consult the documentation provided with your SceneScope® prior to operation for instructions
on proper installation, operation, and maintenance. Always adhere to the following safety
precautions when operating any of the SceneScope® components:
CAUTION
This instrument is used in conjunction with ultraviolet light (shortwave;
sometimes mid-wave and long-wave).
Exposure to these radiations, even reflected or diffused, can result in serious, and sometimes
irreversible, eye and skin injuries.
Do not aim the UV light at anyone. Do not look directly into the light or its reflections.
WARNING
UV exposures are not immediately felt.
User may not realize hazard until it is too late and damage is done.
Health effects of exposure to UV light are familiar to anyone who has had sunburn. However, the
UV light level around some UV equipment greatly exceeds the level found in nature. Acute
(short-term) effects include redness or ulceration of the skin. At high levels of exposure, these
burns can be serious. For chronic exposures, there is also a cumulative risk of harm. This risk
depends upon the amount of exposure during your lifetime. The long-term risks for large
cumulative exposure include premature aging of the skin, wrinkles and, most seriously, skin
cancer and cataract.
WARNING CAUTION
Explosion hazard! Risk of Do not expose this equipment
chemical burns! Do not to water or humidity.
short-circuit terminals on
battery.
WARNING WARNING
Risk of electrical shock! Do not operate in an explosive
To avoid the risk of electrical atmosphere! Do not operate the
shock, always disconnect the instrument in the presence of
lamp from the battery or AC flammable gases or fumes.
power-source before cleaning Operation of any electrical
or servicing. instrument in such an
environment constitutes a
definite safety hazard.
Do not perform any servicing other than contained in the instruction manual. Return the lamp to
the factory for maintenance not covered in this section. An instrument that appears damaged or
defective should be made inoperative and secured against unintended operation until it can be
repaired by qualified service personnel.
Do not install substitute parts or perform any unauthorized modification to the instrument.
Do not use this instrument in a manner not specified by the manufacturer.
USA: +1-732-494-8660 France: +33 (0) 1 64 54 13 00 Japan: +81 (0) 3 3861 8231
Germany: +49 (0) 8462317-0 UK: +44 (0) 20 8204 8142 Italy: +39 0 2 57603050
(Formerly known as HORIBA Jobin Yvon) China: +86 (0)10 6849 2216 Other Countries: +33 (0) 1 64 54 13 00
P/N 81099 rev.02/13