Professional Documents
Culture Documents
-33004/99
66
vlk/kj.k
EXTRAORDINARY
Hkkx II—[k.M 3—mi&[k.M (i)
PART II—Section 3—Sub-section (i)
izkf/dkj ls izdkf'kr
PUBLISHED BY AUTHORITY
la- 246] ubZ fnYyh] 'kqØokj] vçSy 17] 2015@pS=k 27] 1937
No. 246] NEW DELHI, FRIDAY, APRIL 17, 2015/CHAITRA 27, 1937
खान मंालय
अिधसूचना
नई दली, 17 अ
ैल, 2015
सा.
सा.का.
का.िन.
िन. 304( क
ीय सरकार, खान और खिनज (िवकास और िविनयमन) अिधिनयम,
304(अ).— 1957 (1957 का
1.1 इन िनयम का संि'(त नाम “खान (खिनज अंतव#,तु का सा.य) िनयम, 2015” है ।
(i) पे8ोिलयम और
ाकृ ितक गैस;
3. परभाषाएं और िनवचन :
सबूत खिनज भंडार (111), Mयवहाय#ता खिनज संसाधन (211), Mयवहाय#तापूव# खिनज संसाधन (221
और 222), उपांतEरत कारक, भूवैCािनक अNययन (एफ-3), Mयवहाय#तापूव# अNययन (एफ 2), Mयवहाय#ता
अNययन (एफ 1), तािवक Fप से आLथक (ई3), संभाMय Fप से आLथक (ई2) और आLथक (ई1) के अथ#
इन िनयम क अनुसूची के भाग-1 म
यथा पEरभािषत अनुसार हगे;
(ज) इन िनयम म
युत सभी शIद और अिभMयितय जो पEरभािषत नहP कए गए हQ, का वहP अथ# होगा
जो अिधिनयम अथवा उसके अंतग#त बनाए गए िनयम म
यथा िनधा#Eरत कया गया है ।
4. अिधिनयम क, धारा क क, उपधारा
10 (2) के खंड (ख) के उप-
उप-खंड (i) के अधीन खिनज िव/मानता का अवधारण
करना :
(1) जहां यथाि,थत कसी आवी'ण परिमट अथवा पूवB'ण अनुCि(त के धारक ारा पूवB'ण अनुCि(त अथवा खनन पDा
,वीकृित संबंधी आवेदन 12 जनवरी, 2015 से पूव#
,तुत नहP कया गया हो, तो ऐसे परिमट अथवा
अनुCि(त धारक ारा अिधिनयम क धारा 10क क उप-धारा (2) के खंड (ख) के उप-खंड (i) के अंतग#त खिनज
िवRमानता का िनधा#रण कया गया समझा जाएगा, यद धारक के पास –
(क) पूव1 ण अनुि
त दान करने के मामले म3
(i) बाद म
गवेषण के यो:य जोन ('े0) का पता लगाने के िलए आवी'ण सवB'ण (जी4) कया है;
और
(I) संसूिचत खिनज संसाधन (332) का Tया@वयन के िलए 'े0 म कम से कम साधारण गवेषण
(II) संभािवत खिनज भंडार (121 और 122) का पता लगाने के िलए अनुसूची के भाग-Vके पुिHट म
कम से कम एक पूव-# Mयवहाय#ता अNययन (एफ-2) तैयार कया ताक खनन पDे के आरंभ क
तारीख से पांच वषU क अविध के िलए खनन
चालन क योजना बनाई जा सके और यह ये
EरपोटV राJय सरकार को
,तुत क गई है ।
(2) जब यथाि,थित कसी आवी'ण परिमट अथवा पूवB'ण अनुCि(त के धारक ारा पूवB'ण अनुCि(त अथवा खनन पDा
,वीकृित संबंधी आवेदन 12 जनवरी, 2015 से पूव#
स्तुत कया गया हो, तो ऐसे परिमट अथवा अनुCि(त धारक
ारा अिधिनयम क धारा 10क क उप-धारा (2) के खंड (ख) के उप-खंड (i) के अधीन खिनज िवRमानता का
िनधा#रण कया गया माना जाएगा, यद धारक के पास -
(क) पूव1 ण अनुि
त दान करने के मामले म3
(i) खिनज संर'ण और िवकास िनयम, 1988 के अधीन पूवB'ण क ,कम के अनुसार पूव'
B ण
चालन Tया@वत कए गए; तथा
(II) पूवB'ण क ऐसी ,कम के अनुFप और खान मं0ालय ारा तारीख 24 जून, 2009 और 30
अतूबर, 2014 को जारी खिनज Eरयायत
,ताव क
सं,करण के िलए माग#दश#क िस?ांत म
अिधकिथत शतU को पूरा करके आवी'ण
चालन पूरा करने के बाद Eरपोट# राJय सरकार को
,तुत क ।
(ख) खनन प4ा दान करने के मामले म3
(I) खिनज संर'ण और िवकास िनयम, 1988 के अधीन पूवB'ण क ,कम के अनुसार पूव'
B ण
चालन कया; तथा
(II) पूवB'ण क ऐसी ,कम के अनुFप और खान मं0ालय ारा तारीख 24 जून, 2009 और 30
अतूबर, 2014 को जारी खिनज Eरयायत
,ताव क
सं,करण के िलए माग# दश#क िस?ांत म
अिधकिथत शतU को पूरा करके आवी'ण
चालन पूरा करने के बाद Eरपोट# राJय सरकार को
,तुत क ।
5. अिधिनयम क, धारा ख क, उप
10 -धारा (3) और धारा 11 क, उप -धारा (2) के अधीन खनन प4े क, नीलामी के
िलए कम से कम एक Mयवहाय#ता-पूव# अNययन (एफ2) Eरपोट# तैयार कया गया है और यह Eरपोट# राJय
सरकार को
,तुत क गई है ।
8. िशिथलता
[िनयम 2(iii)
iii), 3(च), 3(छ), 4(1)(क
)(क)(ii
)(ii)
ii), 4(1)(ख
)(ख)(ii
)(ii)
ii), 5(ख), 7(1)(ख
)(ख), 7(2)(ख
)(ख)]
भाग-
भाग-I
परभाषाएं
1. अनुसूची के भाग-I म
युत पEरभाषाएं और कोड मु\यत: संयुत राH8 िव@यास वग]करण (यूएनएफसी) वज#न-
1997 और खिनज भंडारण अ@तरराH8ीय सूचना मानक (सीआरआईआरएससीओ) टेम(लेट सिमित से िलए गए है । आव^यक
होने पर उसम
िव,तार करने के िलए यहां दी गई पEरभाषा_ को यूएनएफसी या सीआरआईआरएससीओ के संदभ# के ारा
अनुपूरक बनाया जाए ।
2. कसी खिनज िन'ेप के िलए गवेषण के चार चरण यथा टोही सवB'ण (जी4),
ारं िभक गवेषण (जी3), सामा@य
गवेषण (जी2) और िव,तृत गवेषण (जी1) होते हQ । गवेषण के ये चरण भूवैCािनक आ^वासन के ,तर को
दLशत करते ए
Tमश: चार संसाधन Zेिणय यथा पूवB'ण खिनज संसाधन, अनुमािनत खिनज संसाधन, इं िगत खिनज संसाधन और मािपत
खिनज संसाधन को दृिHटगत करते है ।
3. टोही सव1ण (जी4
जी4)-
ादेिशक भूवैCािनक अNययन, 'े0ीय भूवैCािनक मानिच0ण, हवाई तथा परो' िविधयां,
6. िवतृ त गवेषण (जी1म
नमूने लेने के माNयम से जैसे दृ^यांश, गडढ़ो, खाई, वेधन िछ, शाhट और सुरंग आद से
जी1)
ा(त Cात िन'ेप के िव,तृत तीन िवमीय सीमांकन शािमल है । नमूना लेने वाले ि[ड ,थल जैसे आकार, बनावट, संरचना,
[ेड और िन'ेप के अ@य संबंिधत ल'ण के बत ही करीब है िजनसे उनक शु?ता क सही जानकारी Cात ई है ।
अिधकािधक नमूने लेने के साथ-साथ
Tम जांच करने क भी आव^यकता हो सकती है ।
7. खिनज संसाधन ऐसे Fप, [ेड या गुण व मा0ा म
भूपप#टी पर या म
आLथक महव क ठोस साम[ी का सांण अथवा
उपि,थित है जो असमात आLथक िनHकष# के िलए उिचत संभावनाएं है। नमूने सिहत िविशHट भूवैCािनक
माण और
जानकारी से खिनज संसाधन क अवि,थित, मा0ा, [ेड या गुण, िनरं तर उपि,थित और अ@य भूवैCािनक ल'ण को Cात
कया गया है, उनका
ाकलन अथवा िनव#चन कया गया है । खिनज संसाधन को बढ़ते भूवैCािनक िव^वास के Tम म
पूवB'ण, अनुमािनत, इं िगत और मािपत संसाधन Zेिणय म
उपिवभािजत कया गया है ।
8. पूव1 ण खिनज संसाधन परो'
माण पर
ारं िभक Fप से आधाEरत
ाकलन है और टोही सवB'ण के ारा
(334)
334)
सृिजत डाटा और सूचना सं[ह है । उपलIध आकड़ क मा0ा खिनज संसाधन के कसी उिचत
ाकलन करने के िलए
सामा@यत: पया#(त नहP है ।
9. 333) खिनज संसाधन का वह भाग है िजसके िलए सीिमत भूवैCािनक
माण और
अनुमािनत खिनज संसाधन (333)
10.
10. इं िगत खिनज संसाधन (332)
332)खिनज संसाधन का वह भाग है िजसके िलए मा0ा, [ेड या गुण, घनव, आकार और
भौितक ल'ण को िन'ेप के आLथक महव के मूयांकन और खान योजना क मदद के िलए पया#(त िववरण म
संशोिधत
घटक के अनु
योग के िलए काफ िव^वास के साथ
ाकलन कया जाता है । भूवैCािनक
माण समुिचत िववरण और
िव^वसनीय गवेषण, नमून और परी'ण से
ा(त आ है और यह अवलोकन के िब@दु_ के मNय भूवैCािनक और [ेड या गुण
क िनर@तरता को जानने के िलए पया#(त है । मािपत खिनज संसाधन के
योग क तुलना म
इं िगत खिनज संसाधन का
िव^वास ,तर कम है और इसे संभािवत खिनज भंडारण के िलए पEरवLतत कया जा सकता है ।
11.
11. मािपत खिनज संसाधन (331)
331) खिनज संसाधन का वह भाग है िजसके िलए मा0ा, [ेड या गुण, घनव, आकार और
भौितक ल'ण को िन'ेप के आLथक महव के अंितम मूयांकन और िव,तृत खान योजना क मदद के िलए संशोिधत घटक
के अनु
योग के िलए काफ िव^वास के साथ
ाकलन कया जाता है । भूवैCािनक
माण िव,तृत िववरण और िव^वसनीय
गवेषण, नमून और परी'ण से
ा(त आ है यह अवलोकन के िब@दु_ के मध्य भूवैCािनक और [ेड या गुण क िनरं तरता
को जानने के िलए पया#(त है । इं िगत खिनज संसाधन या अनुमािनत खिनज संसाधन कसी एक के
योग क तुलना म
मािपत
खिनज संसाधन का िव^वास ,तर अिधक है । इसे िस? खिनज/भंडारण या संभािवत खिनज भंडारण के िलए पEरवLतत कया
जा सकता है ।
12.
12. खिनज भंडारण आLथक Fप से एक मािपत और/या इं िगत खिनज संसाधन का खननयुत भाग है । इसम
'ित के
िलए डाइयूeटग मैEटEरयल और एलाउं सेस शािमल हQ जो साम[ी को खिनत या/िनकालते समय घEटत हो सकती है और
6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Mयवहाय#तापूव# या Mयवहाय#ता के ,तर पर यथा उिचत अNययन ारा पEरभािषत कया गया है िजसम
संशोिधत घटक का
अनु
योग सि!मिलत है ।
संभा9य खिनज भंडारण (121 व 122)
122) आLथक दृिHट से इं िगत, और कु छ पEरि,थितय म
मािपत खिनज संसाधन
का खननयुत भाग है ।
संभािवत खिनज भंडारण के
योग म
संशोिधत घटक म
िव^वास ,तर िस? खिनज भंडारण के
योग क तुलना म
कम है ।
खनन कायU से
ाकिलत लागत के िलए महवपूण# कट आफ मूय ारा
ा(त होता है । भूवैCािनक अNययन का
योजन
खिनजीकरण को पहचानना, खिनज िन'ेप क िनरं तर उपि,थित, मा0ा और गुण को Cात करना तथा इसम
िनवेश के अवसर
को पEरभािषत करना है ।
तथािप, आLथक महव क Zेिणय को एक आLथक महव के मूयांकन के िलए आव^यक िववरण के अभाव के कारण
भूवैCािनक अNययन से सामा@यतया पEरभािषत नहP कया जा सकता है ।
ाकिलत संसाधन मा0ा_ से यह Cात हो सकता
है क िन'ेप मूलभूत आLथक महव अथा#त आLथक से संभािवत Fप से आLथक महव का है।
14.
14. उपांतरत कारक घटक वे घटक हQ जो खिनज संसाधन से खिनज भंडारण म
पEरवLतत करने के िलए
Mयवहाय#तापूव# या Mयवहाय#ता अNययन करते समय िवचार िवमश# म
युत कए जाते है इनम
खनन
Tया, अंितम उपयोग,
कट आफ [ेड, mेश होड मूय, धािवक, अवसंरचना, आLथक, िवपणन, िविधक, पया#वरणीय, सामािजक और शासकय
घटक शािमल है जो
ितबि@धत नहP है ।
15.
15. 9यवहाय
यवहायतापूव अ@ययन (एफ2
एफ2) खिनज पEरयोजना के आLथक महव के िलए िवकप क Zृंखला का एक अNययन है
जो एक ऐसे चरण तक िवकिसत हो गया है जहां भूिमगत खनन या गडढा संरचना क ि,थित म
, खुले गडढ
क ि,थित म
अिधमा@य खनन िविध Cात क गई हQ और खिनज
Tया क एक
भावी िविध िनधा#Eरत क गई है । इसम
पEरवध#न घटक
क उिचत अवधारणा_ पर आधाEरत िवतीय िव^लेषण तथा कसी अ@य संबंिधत घटक का मूयांकन शािमल है जो
िनधा#Eरत करने के िलए पया#(त है यद खिनज संसाधन के सभी या भाग को सूचना के समय खिनज भंडारण के िलए
पEरवLतत कया जाए । एक Mयवहाय#तापूव# अNययन का िव^वास ,तर Mयवहाय#ता अNययन क तुलना म
कम है ।
16.
16. 9यवहाय
यवहायता अ@ययन (एफ1एफ1) एक खिनज पEरयोजना के िलए चयिनत िवकास िवकप का एक िव,तृत आLथक
17.
17. मूलभूत प से आ7थक भूवैCािनक अNययन के साधन ारा आकिलत और Zेणी/गुण सिहत टन/वोयूम म
(ई3)
सूिचत मा0ा मूलभूत Fप से आLथक महव क है । चूंक भूवैCािनक अNययन म
के वल आLथक महव का आरं िभक मूयांकन
शािमल है इसिलए आLथक और संभािवत Fप से आLथक के मNय कोई अंतर भेद नहP कया जा सकता है । अत: इन संसाधन
को आLथक से संभािवत Fप से आLथक क Zेणी म
ि,थत होना बताया गया है ।
¹Hkkx IIµ[k.M 3 (i)º Hkkjr dk jkti=k % vlk/kj.k 7
18.
18. संभािवत प से आ7थक बढ़ती पEरशु?ता के Tम म
Mयवहाय#तापूव# अNययन/Mयवहाय#ता अNययन के साधन
(ई2)
ारा
दLशत [ेड/गुण सिहत टन/
वाह म
सूिचत मा0ा जो
ौRोिगकय आLथक, पया#वरणीय और अ@य संबंिधत ि,थितय के
तहत @यायोिचत िनHकष#ण नहP है वा,तिवक Fप से िनधा#रण के समय मान ली गई है परं तु भिवHय म
ऐसा शायद ही संभव
हो ।
19.
19. आ7थक (ई1)बढती पEरशु?ता के Tम म
Mयवहाय#तापूव# अNययन/Mयवहाय#ता अNययन के साधन ारा
दLशत
[ेड/गुण सिहत टन/
वाह म
सूिचत मा0ा जो
ौRोिगकय आLथक, पया#वरणीय और अ@य संबंिधत ि,थितय के तहत
@यायोिचत िनHकषण# है, को अवधारण के समय वा,तिवक Fप से मान िलया गया है।
भाग-
भाग-2
7. शैलवण+ना तथा िमनरा
ाफक अ-ययन : चTान9 के कार तथा <ेन आकार, बनावट, नाप सिहत खिनज संयोजन तथा यद
आव-यक समझा जाए तो िन&तारण िवशेषताएं आद ।
8. "पुंज सघनता अ-ययन : पुंज सघनता को उस पZित से मापा जाएगा जो खिनज/अय&क िनकाय म ारं िभक शू*य ?रVत
&थान9 (वग, संर[ता आद) के िलए पयापत है ।
9. स2जीकरण
जीकरण अ-ययन3 ं नमूना करना : यद सं&करण ौोिगक परीण के िलए आव-यक हो तो पुंज नमूना
ययन3 के िलए "पुज
करना ।
10. पया+वरणीय से6टग : &थानीय अवसंरचना, &थानीय जनसं"या, ऐितहािसक &थल, वन अ]यार^य, राU4ीय पाक संबंधी िववरण
तथा ेF क पयावरणीय से_टग संबंधी सूचना एकF क जाए ।
11. अ7य संगत डाटा : भूगत जल, भूतकनीक तथा चTान क िवशेषताएं आद जो संगत हो सकती है ।
भाग-
भाग-3
भंडार के कार तथा जी4 &तर जी3 &तर जी2 &तर जी1 स्तर ?टDपिणयां
मुख खिनज
ता9रत 8तरीय यद आव-यक हो चूना-प>थर,
I. सं8ता9रत चूना-प>थर, चूना-प>थर, पूवण के िविभ*न
तथा िनयिमत और
तो &काउट वेधन बॉVसाइट, पोटाश बॉVसाइट, पोटाश बॉVसाइट, पोटाश &तर9 के िलए ि<ड
अिनयिमत यवहार3 (समय-समय पर तथा नमक बेड के
:यवहार3 &पेJसग के अनुसार
क 8ीय सरकार तथा सा`ट बेड के तथा सा`ट बेड के ि<ड पैटन म सतही
Gारा िनaदUट ि<ड िलए ि<ड का अंतर िलए ि<ड का िलए ि<ड का अंतर िप_टग से 6 मी. तक
का सारणी बध
िनेप : िनयिमत Rयवहार अंतर िनयिमत िनयिमत Rयवहार क गहराई तक
के प?रेCय म)
लौह अय&क, मLगनीज वाले भंडार9 के िलए Rयवहार वाले वाले भंडार9 के िलए िनरं तर तलछट
अय&क, बॉVसाइट, 800 मी. अथवा भंडार9 के िलए 200 मी. अथवा सतही भंडार9 के
चूना प>थर, उसम कम तथा 400 मी. अथवा उसम कम तथा िलए पयाDत हो
अिनयिमत Rयवहार उसम कम तथा अिनयिमत Rयवहार सकता है । आगे क
2ोमाइट/पोटाश तथा वाले भंडार9 के िलए अिनयिमत वाले भंडार9 के िलए गहराई म भंडार9
सा`ट बेड आद 400 मी. अथवा Rयवहार वाले 100 मी. अथवा क िनरं तरता के
उससे कम; अ*य के भंडार9 के िलए उससे कम; अ*य के िलए बंधनक
िलए 400मी. अथवा 200 मी. अथवा िलए 100मी. िसफा?रश क गई है
उससे कम िनयिमत उससे कम; अ*य अथवा उससे कम ।
के िलए तथा के िलए 200मी. िनयिमत के िलए
200मी. अथवा अथवा उससे कम तथा 50मी. अथवा
उससे कम िनयिमत के िलए उससे कम
अिनयिमत Rयवहार तथा 100मी. अिनयिमत Rयवहार
वाल9 के िलए । अथवा उससे कम वाल9 के िलए ।
अिनयिमत
Rयवहार वाल9 के
िलए ।
II. एनएशलॉन यद आव-यक हो बोर होल क
वाले बोर होलक बोर होल क जी2 तथा जी1 &तर
तो & काउट वे ध न &पेJसग, &4ाइक के & पे J सग के साथ &पेJसग, &4ाइक के पर जहां कहK
िनकाय3, सम
िशरा
(समय-समय पर साथ 200-100 मी. 100-50 मी. साथ 50-25 मी. आव-यक हो <ेड9
क िसिलकभूत रे खीय क 8ीय सरकार अथवा उससे कम अथवा उससे कम अथवा उससे कम क ब`क िनधारण के
जोन3 का भसूराकृ ितक Gारा िनaदUट ि<ड
दूरी के अंतराल पर दूरी पर रखा जाए । दूरी के अंतराल रखा साथ गवेषणा>मक
&पड । ल>सस
े , पॉकेट,
ट, के प?रेCय म) िवशेष मामल9 म जाए । खान ओपJनग खुला
रखा जाए ।
8टॉक
टॉक काय+, लघु आव-यकता होने मुहाना अथवा
आकार वाले िनकाय3 पर इसे िवशेषकर भूिमगत
तक अिनयिमत आकार कमती धातुb के
मोडे8ट िलए 25 मी.
¹Hkkx IIµ[k.M 3 (i)º Hkkjr dk jkti=k % vlk/kj.k 9
टोपाज, इमरा`ड
िनेप, हीरा ।
IV. Dलोट/Eलेसर
सर यद आव-यक हो िनेप के 4ड के साथ िनेप के 4ड के िनेप के 4ड के ि<ड म उथली
िनेप : तो &काउट वेधन 400 मी. तथा 200 साथ 200 मी. साथ 100 मी. तथा िनेप िप_टग के
लौह, मLगनीज अय&क
(समय-समय पर मी. से अिधक तथा 100 मी. से 50 मी. से अिधक िलए उपयुVत हो
क 8ीय सरकार अिधक सकता है । स?रत
hलोट; Dलेसर ?टन Gारा िनaदUट ि<ड अवसाद अथवा
तथा गो`ड िनेप; के प?रेCय म) Dलेसर अवसाद,
गारनेट, इलमेनाइट, >येक &तर पर
iटाइल, िजरकोन; आव-यकतानुसार ।
सां8ण का
हीरा, कोर*डस, योगशाला मापन
Vयानाइट, पृथVकरण तथा
िसिलमेनाइट hलोटस । परीण तथा
िव-लेषण ।
10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
* यद तटीय बालू, नदीय बालू आद के साथ सहायक लेसर िनेप म पुन: ाित क सूचना िमलती है तो
संसाधन" क आविधक पुन$म%ू यांकन करना आव&यक होगा ।
भाग-
भाग-IVक
IVक
वेधन नमूना बंका, सोिनक इ>याद) एवं िव&तृत िववरण (उहाहरणाथ कोर डायमीटर, ?4पल या &टLडड टयूब, कॉलर
आरएल, एिजमुथ, इनिVलनेसन, वेधन िछ89 के का@डनेट इ>याद) ।
- कोर एवं िचप नमूना को समुिचत ढंग से अिभलेिखत एवं प?रणाम को मूल्यांकत कया गया है ।
- अिधकतम नमूना ाDत करने एवं िनiपक कृ ित के नमून9 को सुिनि-चत करने के िलए उपाय कए
गए हL ।
- क नमूना ािDत एवं <ेड म एक संबंध बनता हL एवं सूCम/&थूल पदाथ क ित/वृिZ के कारण नमूना
नित पाए गए हL ।
संलेखन : क कोर एवं िचप नमून9 को समुिचत खिनज संसाधन आकलन, खनन अ;ययन और धातुकमeय
अ;ययन के सहयोग के िलए िव&तृत &तर पर संलेिखत कया गया है ।
11. अव-नमूना िविध - कोर नमूना क ि&थित म काटा या चीरा गया है और एक चौथाई, आधा या पूरा कोर िलया गया है ।
एवं नमूना क तैयारी - यद कोर नहK है तो राइफ`ड, टयूब सैOपलड, रोटरी &पिलट और नमूना आ8 है या सूखा ।
- कृ ित, गुण एवं नमूना तैयार करने क िविध क उपयुVतता सभी कार के नमून9 के िलए ।
- सभी अव-नमूना चरण से नमूना के अिधकतम िनiपकतता तक के िलए <िहत गुण िनयंFण 2याएं।
- उपाय सुिनि-चत कए गए हL क नमूना एकिFत एवं &व&थान पदाथ के िनiपक हL ।
- क नमूना का आकार तैयार कए जा रहे नमूने, के कण के आकार के िलए उपयुVत हL ।
12. आमापन आंकड़ा के - युVत कए गए आमापन और योगशाला 2याएं क कृ ित, गुण एवं उपयुVतता एवं िविध को
Vवािलटी एवं आंिशक या पूणiपेण माना गया है ।
योगशाला म जांच
- <िहतगुण िनयंFण 2या क कृ ित (उदाहरणाथ – मानक, अपूण, िZतीयक, योगशाला से बाहर
जांच) एवं सटीकता क &वीकाय &तर (नित का न होना) तथा प?रशुZता को &थािपत कया गया है ।
- सटीकता के &वीकाय &तर तक मू`यांकन के िलए िव-लेिषत नमून9 के 10 ितशत को एनएबीएल
>यािशत तृतीय प/या िवHान एवं ौौिगक िवभाग (डीएसटी) बीआईएस से मा*यता ाDत
योगशालाb या सरकारी योगशालाb म िव-लेिषत कया जाए ।
13. आ8ता - क टनेज को िनजल आधार पर या ाकृ ितक आ8ता के साथ आकिलत कया गया है एवं आ8ता क
माFा के िनधारण क िविध ।
14. पुंज घन>व क माना या अवधा?रत है । यद माना गया है तो पूवानुमान का आधार । यद िनधा?रत कया गया है
तो उसके िलए युVत िविध, नम या िनजल, मापनक आवृित, कृ ित, आकार एवं नमूना क
िनiपकतता ।
15. संसाधना/ाVकलन - खिनजन क िनरं तरता के िनधारण के िलए पयाDत आंकड़ा घन>व पर िवचार-िवमश तथा युVत
तकनीक आकलन 2या के िलए पयाDत सं-लेिषत आंकड़ा आधार ।
- लागू कए गए आकलन तकनीक क कृ ित एवं उपयुVतता तथा अ>यंत <ेड मान, डोमेJनग,
इंटरपोलेसन पारामीटर एवं आंकड़ा Jबदु से एVस4ापोलेसन क अिधकतम दूरी ।
- खिनज संसाधन9 को िविभ*न pेिणय9 म वगeकरण का आधार ।
- गौण उ>पाद क ािDत के संबंध म कए गए पूवानुमान ।
- टनेज एवं <ेड के आकलन के िलए (सेVसन, पॉलीगॉन, इनवस िड&टस, िजयो&टै?टकल या अ*य िविध)
युVत िविध का िव&तृत िववरण और कए गए पूवानुमान ।
- संसाधन आकलन के िनयंFण के िलए भूवैHािनक िनवचन का िव&तृत िववरण ।
- उपयोग या उपभोग म न लाए गए <ेड क_टग या कै Jपग के िलए आधार पर िवचार-िवमश ।
- यद संगणक िविध को चुना गया है तो काय2म एवं युVत पैरामीटर का वणन ।
- िजयो-&टै?टकल पZित म अ>यंत बदलाव होता है इसिलए िव&तृत iप से इसका िववरण दया जाना
चािहए । चयिनत िविध औिच>यपूण होना चािहए । वे?रयो<ाम एवं भूवैHािनक िनवचन के साथ इसक
अनुकूलता सिहत िजयो-&टै?टकल पारामीटर पर िवचार-िवमश कया जाना चािहए । सदृश िनेप के
िलए युVत कए गए िजयो-&टै?टVस म ाDत अनुभव ;यान म लाया जाना चािहए ।
- आंकड़ा स>यापन और/या युVत मा*य 2या ।
16. आगे का काय - योजनाबZ अ<तर काय क कृ ित एवं पैमाना (उदाहरणाथ – पा-व िव&तार या गहराई िव&तार या
बड़े पैमाने पर वेधन के िलए जांच) ।
17. ?रपोट के िलए ?रपोट म आकलन के समथन म नVश9, काट9, संलेख9, िव-लेिषत ितवेदन, फोटो<ाफ सिहत सभी
प?रिशUट/अनुलfनक संबंिधत आंकड़ा शािमल ह9गे ।
18. कोई अ*य सूचना कोई अ*य सूचना, जैसा उपलkध होगा या यथा िविहत कसी ािधकारी Gारा अपेित हो सके ।
12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
भाग IV ख
9 मू`य का अनुमान - पूणत: िवमुVत (िलबरे शन) ऐसी पZित का उपयोग करते Eए संसािधत हीर9 के नमून9 के मू`य9 के
लगाना बारे म सूिचत नहK करना चािहए, िजसका सं&करण गवेषण नमून9 के िलए आमतौर पर उपयोग
कया जाता है।
- िजस सीमा तक ऐसी सूचना को वािणि(यक दृिUट से संवेदनशील नहK माना जाता है, उस सीमा
तक िनOनिलिखत सूचना जनता को देनी चािहए
• उपयुVत &2न आकार ित फे स अथवा गहरे हीर9 क प?रमाण ।
• कमती पासल का kयौरा
• कम आकारन कट-ऑफ ित फे स अथवा गहरे प>थर9, करे ट9 क सं"या
• चुिन*दा िनचले कट-ऑफ पर औसतन ित डालर कै रे ट और डालर कै रे ट मू`य के बारे म
अमरीक डालर म सूिचत करना चािहए । ित कै रेट मू`य का प?रयोजना मू`य को दशाने म
िववेचना>मक मह>व होता है ।
• मू`य का आधार (उदाहरण के िलए डीलर का 2य मू`य और डीलर का िव2य मू`य आद) ।
• हीरे क टू ट-फू ट का आकलन करना।
10 वगeकरण - आयतन और सघनता का आकलन करने क सामा*य मांग9 के अलावा नमूना <ेड (कै रे ट ित टन)
ाDत करने के िलए प>थर क uVवसी (प>थर ित Vयूिबक मीटर अथवा टन) को प>थर के आकार
(कै रे ट ित प>थर) के साथ सOबZ करने क जiरत है । इन अनुमान9 म अिनि-चतता के घटक के
बारे म िवचार कया जाना चािहए और वगeकरण तदनुसार कया जाना चािहए ।
भाग-
भाग-5
सा@यता
यता पूव रपोट क, िवषय वतु
-
- चयिनत खनन िविधय9 के िलए अपेित अवसंरचना, जहां उपलkध हो, िनUपादन मानदंड9
क ऐितहािसक िव-वसनीयता ।
4. धातु कमeय घटक अथवा - &तािवत धातु कमeय 2या और उस 2या क िनेप कार क दृिUट से उपयुVतता ।
अनुमान - कए गए धातु कमeय परीण काय क कृ ित, माFा और ितिनिध>वता और लागू कए गए
धातु कमeय ािDतयां ।
- ितकर त>व9 के िलए लगाया गया कोई अनुमान अथवा अनुHा ।
- कसी भी पुंज नमूने क िवमानता अथवा ायोिगक पैमाने परीण काय और ऐसे नमूने
कतने िड<ी तक संपूण अय&क िनकाय के ितिनिध>व के iप म है ।
- खिनज संसाधन के िलए संसिू चत टनेज और <ेड म यह &पUट उललेख होना चािहए क Vया
यह संयंF क साम<ी के संबंध म है अथवा ािDत के संबंध म । मौजूदा संयंF और उपकरण,
ित&थापन और बचाव मू`य के संकेत सिहत, पर ?टDपणी ।
5. लागत और राज&व कारक - प?रलित पूंजी और चालन लागत9 के बारे म इनका sोत, अथवा लगाया गया अनुमान ।
- हैड<ेड, धातु अथवा व&तु कमत (कमत) िविनमय दर , प?रवहन और शोधन भार, जुमाना
आद सिहत राज&व के बारे म लगाए गए अनुमान ।
- देय रॉयि`टय9 के िलए दी गई अनुमितयां, सरकार और ाइवेट दोन9 ।
- उि`लिखत अविध के िलए बुिनयादी नकदी ापण सूचना ।
- वा@षक िनयोिजत उ>पादन, िनेप क एनपीवी और आईआरआर, वा@षक प?रलित
उ>पादन के आधार पर िनेप का ताि>वक मू`य ।
6. बाज़ार आंकलन - कसी िविशUट व&तु के िलए मांग, आपू@त और &टॉक ि&थित, खपत वृित और भिवUय म
आपू@त और मांग को भािवत करने वाले संभािवत घटक ।
- <ाहक और ित&पधe िव-लेषण, उ>पाद के िलए संभािवत बाज़ार अवसर9 के पहचान सिहत ।
- कमत और माFा का पूवानुमान और इन पूवानुमान9 के िलए आधार ।
- औोिगक खिनज9 के िलए <ाहक िविशUटीकरण, परीण और आपू@त ठे के से पूव &वीकृ ित
अपेाएं ।
7. अ*य आशोधनकारी घटक - प?रयोजना क संभािवत Rयवहायता पर ाकृ ितक जोिखम, अवसंरचना, वैधािनक, िवपणन,
सामािजक अथवा सरकारी घटक9, यद कोई हो, और/अथवा खिनज भंडार9 के आंकलन और
वगeकरण पर भाव ।
- प?रयोजना क Rयवहायता के िलए मह>वपूण &वािम>व क ि&थित और अनुमोदन, जैसे क
खनन पTा, िन&सरण परिमट, सरकारी और वैधािनक अनुमोदन ।
- >यािशत दािय>व9 का पयावरणeय िववरण, खिनज अिधकार9 और &वािम>व9 क अवि&थित
योजनाएं ।
8. वगeकरण - खिनज भंडार9 को अलग-अलग िव-वसनीय pेिणय9 म वगeकृ त करने के िलए आधार ।
- &तािवत ारं िभक खान िडजाईन/संक`पना>मक योजना म िवचा?रत <ेड-वार खनन योfय
माFाb के अनुमान को इस शत के अधीन अंितम iप देना क सभी आव-यक
अनुमोदन9/संिवदाb क पुिUट कर ली गई है अथवा ऐसी यथोिचत अपेाएं है क ऐसे सभी
अनुमोदन/संिवदाएं यथोिचत समयाविध के भीतर और इस माणन के साथ क आ@थक
Rयवहायता अ`पकािलक ितकू ल बाज़ार दशाb से भािवत नहK होगी, और यह भी क
दीघाविध अनुमान अनुकूल ह9गे, ाDत कर ली जाएगी ।
MINISTRY OF MINES
NOTIFICATION
New Delhi, the 17th April, 2015
G.S.R. 304(E).—In exercise of the powers conferred by section 13 of the Mines and Minerals
(Regulation and Development) Act, 1957 (67 of 1957), the Central Government hereby makes the following
rules, namely:—
1. Short title and commencement:
(1) These rules may be called the Minerals (Evidence of Mineral Contents) Rules, 2015.
(2) They shall come into force on the date of their publication in the Official Gazette.
2. Application: These rules shall apply to all minerals except -
(i) petroleum and natural gas;
(ii) coal, lignite and sand for stowing;
(iii) minerals listed in Part B of the First Schedule to the Mines and Minerals (Development and
Regulation) Act, 1957 (67 of 1957); and
(iv) minor minerals.
3. Definitions and interpretation:
In these rules, unless the context otherwise requires, -
(a) “Act” means the Mines and Minerals (Development and Regulation) Act, 1957 (67 of 1957);
(b) “composite licence” means a prospecting licence-cum-mining lease issued under sub-section
(2) of section 10B or sub-section (3) of section 11of the Act;
(c) ‘conforming’ means in a form as near thereto as circumstances of each case may require;
(d) “evidence of mineral contents” means the existence of mineral contents established as
specified in rule 4, rule 5, or sub-rule (2) of rule 7, as the case may be;
(e) “threshold value of minerals” means the limits prescribed by the Indian Bureau of Mines
from time to time based on the beneficiability and marketability of a mineral for a given
region and given time, below which the material obtained after mining can be discarded as
waste;
(f) “Schedule” means the Schedule annexed to these rules;
(g) the expressions Reconnaissance Survey (G4), Preliminary Exploration (G3), General
Exploration (G2), Detailed Exploration (G1), Reconnaissance Mineral Resource (334),
Inferred Mineral Resource (333), Indicated Mineral Resource (332), Measured Mineral
Resource (331), Probable Mineral Reserve (121 and 122), Proved Mineral Reserve (111),
Feasibility Mineral Resource (211), Pre-Feasibility Mineral Resource (221 and 222),
Modifying Factors, Geological Study (F3), Pre-Feasibility Study (F2), Feasibility Study (F1),
Intrinsically Economic (E3), Potentially Economic (E2) and Economic (E1) used in these
rules shall have the meanings assigned to them in Part-I of the Schedule;
(h) all other words and expressions used in these rules, but not defined, shall have the same
meaning as assigned to them in the Act or the rules made thereunder.
4. Determining existence of mineral contents under sub-clause (i) of clause (b) of sub-section (2) of
section 10A of the Act:
(1) Where an application for grant of prospecting licence or mining lease to a holder of a reconnaissance
permit or prospecting licence, as the case may be, has not been submitted before the 12th January,
2015, the holder of such permit or licence shall be deemed to have established the existence of
mineral contents under sub-clause (i) of clause (b) of sub-section (2) of section 10A of the Act, if the
holder has-
16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
5. General Exploration (G2) involves the initial delineation of an identified deposit. Methods used include
surface mapping, pitting/ trenching/drilling, followed by sampling for evaluation of mineral quantity and
quality (including mineralogical tests on laboratory scale if required), and limited interpolation based on
indirect methods of investigation. The objective is to establish the main geological features of a deposit,
giving a reasonable indication of continuity and providing an initial estimate of size, shape, structure and
grade.
6. Detailed Exploration (G1) involves the detailed three-dimensional delineation of a known deposit
achieved through sampling, such as from outcrops, pits, trenches, boreholes, shafts and tunnels etc. Sampling
grids are closely spaced such that size, shape, structure, grade, and other relevant characteristics of the deposit
are established with a high degree of accuracy. Processing tests involving bulk sampling may be required.
7. Mineral Resource is a concentration or occurrence of solid material of economic interest in or on the
earth’s crust in such form, grade or quality and quantity that there are reasonable prospects for eventual
economic extraction. The location, quantity, grade or quality, continuity and other geological characteristics
of a Mineral Resource are known, estimated or interpreted from specific geological evidence and knowledge,
including sampling. Mineral Resources are subdivided, in order of increasing geological confidence into
Reconnaissance, Inferred, Indicated and Measured resource categories.
8. Reconnaissance Mineral Resource (334) are estimates based primarily on indirect evidence and includes
data and information generated through a reconnaissance survey. The quantity of data available is generally
not sufficient to allow any reasonable estimates of Mineral Resource.
9. Inferred Mineral Resource (333) is that part of a Mineral Resource for which quantity and grade or
quality are estimated on the basis of limited geological evidence and sampling achieved through a stage of
preliminary exploration. An Inferred Resource has a lower level of confidence than that applying to an
Indicated Mineral Resource and shall not be converted to a Mineral Reserve. The majority of Inferred
Mineral Resources could be upgraded to Indicated Mineral Resources with continued exploration.
10. Indicated Mineral Resource (332) is that part of a Mineral Resource for which quantity, grade or
quality, densities, shape and physical characteristics are estimated with sufficient confidence to allow the
application of Modifying Factors in sufficient detail to support mine planning and evaluation of the economic
viability of the deposit. Geological evidence is derived from adequately detailed and reliable exploration,
sampling and testing and is sufficient to assume geological and grade or quality continuity between points of
observation. An Indicated Mineral Resource has a lower level of confidence than that applying to a Measured
Mineral Resource and may only be converted to a Probable Mineral Reserve.
11. Measured Mineral Resource (331) is that part of a Mineral Resource for which quantity, grade or
quality, densities, shape, and physical characteristics are estimated with confidence sufficient to allow the
application of Modifying Factors to support detailed mine planning and final evaluation of the economic
viability of the deposit. Geological evidence is derived from detailed and reliable exploration, sampling and
testing and is sufficient to confirm geological and grade or quality continuity between points of observation.
A Measured Mineral Resource has a higher level of confidence than that applying to either an Indicated
Mineral Resource or an Inferred Mineral Resource. It may be converted to a Proved Mineral Reserve or to a
Probable Mineral Reserve.
12. Mineral Reserve is the economically mineable part of a Measured and Indicated Mineral Resource.
It includes diluting materials and allowances for losses, which may occur when the material is mined or
extracted and is defined by studies at Pre-Feasibility or Feasibility level as appropriate that include
application of Modifying Factors.
Probable Mineral Reserve (121 and 122) is the economically mineable part of an Indicated, and in
some circumstances, a Measured Mineral Resource.
The confidence in the Modifying Factors applying to a Probable Mineral Reserve is lower than that
applying to a Proved Mineral Reserve.
Proved Mineral Reserve (111) is the economically mineable part of a Measured Mineral Resource. A
Proved Mineral Reserve implies a high degree of confidence in the Modifying Factors.
Feasibility Mineral Resource (211) A ‘Feasibility Mineral Resource' is that part of Measured Mineral
Resource which is not economically mineable as , defined by studies at feasibility level. This material
¹Hkkx IIµ[k.M 3 (i)º Hkkjr dk jkti=k % vlk/kj.k 19
is identified as being possibly economically viable subject to changes in technological, economic, and
environmental and/or other relevant conditions.
Pre-Feasibility Mineral Resource (221 and 222) A ‘Prefeasibility Mineral Resource' is that part of an
Indicated, and in some circumstances, Measured Mineral Resource, that has been found, by studies at
Pre-feasibility level, as not economically viable. This material is identified as being possibly
economically viable subject to changes in technological, economic, and environmental and/or other
relevant conditions.
13. A Geological Study (F3) is an initial evaluation of Economic Viability. This is obtained by applying
meaningful cut off values for grade, thickness, depth, and costs estimated from comparable mining
operations. The purpose of the Geological Study is to identify mineralization, to establish continuity,
quantity, and quality of a mineral deposit, and thereby define an investment opportunity.
Economic viability categories, however, cannot in general be defined from the Geological Study because of
the lack of details necessary for an Economic Viability evaluation. The resource quantities estimated may
indicate that the deposit is of intrinsic economic interest, i.e. in the range of economic to potentially
economic.
14. Modifying Factors are those factors which are taken into consideration while conducting a Pre-
feasibility or feasibility study so as to convert Mineral Resources to Mineral Reserves. These include, but are
not restricted to, mining, processing, end use, cut off grade, threshold value, metallurgical, infrastructure,
economic, marketing, legal, environmental, social and governmental factors.
15. A Pre-Feasibility Study (F2) is a study of a range of options for the economic viability of a mineral
project that has advanced to a stage where a preferred mining method, in the case of underground mining, or
the pit configuration, in the case of an open pit, is established and an effective method of mineral processing
is determined. It includes a financial analysis based on reasonable assumptions on the Modifying Factors and
the evaluation of any other relevant factors which are sufficient, to determine if all or part of the Mineral
Resource may be converted to a Mineral Reserve at the time of reporting. A Pre-Feasibility Study is at a
lower confidence level than a Feasibility Study.
16. A Feasibility Study (F1) is a detailed comprehensive economic study of the selected development
option for a mineral project that includes appropriately detailed assessments of applicable Modifying Factors
together with any other relevant operational factors and detailed financial analysis that are necessary to
demonstrate at the time of reporting that extraction is reasonably justified (economically mineable). The
confidence level of the study will be higher than that of a Pre-Feasibility Study.
17. Intrinsically Economic (E3) Quantities, reported in tonnes or volume with grade/quality, estimated
by means of a Geological Study to be of intrinsic economic interest. Since the Geological Study includes
only a preliminary evaluation of Economic Viability, no distinction can be made between economic and
potentially economic. These Resources are therefore said to lie in the range of economic to potentially
economic.
18. Potentially Economic (E2) Quantities, reported in tonnes/volume with grade/quality, demonstrated
by means of a Prefeasibility Study or Feasibility Study in order of increasing accuracy, not justifying
extraction under the technological economic, environmental and other relevant conditions, realistically
assumed at the time of the determination, but possibly so in the future.
19. Economic (E1) Quantities, reported in tonnes or volume with grade/quality, demonstrated by means
of a Prefeasibility Study or Feasibility Study in order of increasing accuracy, that justify extraction under the
technological, economic, environmental and other relevant conditions, realistically assumed at the time of the
determination.
Part-II
Geological Parameters for exploration
1 Aerial reconnaissance: Satellite imagery/ remote sensing/ airborne geophysical survey etc. using appropriate
technology (applicable mainly for reconnaissance exploration (G4) stage).
2 Topographic & Geological survey (Mapping): On 1 : 50,000 or smaller scale for reconnaissance (G4) stage; on
1:25000 to 1 : 10,000 or larger scale for preliminary exploration (G3) stage; 1:4000/1 : 5,000 or larger scale for
general exploration(G2) stage; on 1 : 2,000 or larger scale for detailed exploration (G1) stage.
20 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
3 Ground Geophysical and Geochemical survey: Geophysical and geochemical survey using appropriate
techniques as may be necessary.
4 Technological : Exploration and sampling using appropriate techniques from locations such as outcrops,
trenches, pits, old workings and drill holes. The sampling locations are spaced suitably (in a grid pattern to the
extent possible and may be modified depending on structural complexity) for establishing existence of ore body
and its lateral and vertical continuity. Part III of the schedule may be referred for further details.
For General (G2) and detailed (G1) stages of exploration the depth continuity of mineralisation may be
considered limited to the depth upto which direct evidence of mineralization is established.
The lateral extension to be considered for resource assessment shall depend on geological considerations
supplemented by geological continuity by mapping or by other means and in any case shall not be more than 50%
of the grid spacing of the probe points.
Assessment based on selected information such as isolated assays, isolated drill holes, assays of panned
concentrates etc. is not recommended.
5 Sampling & sub sampling: (a) Random grab/chip/channel sampling from surface exposure/escarpments/ nallah
cuttings/ pit/channel etc. for reconnaissance stage.
(b) Systematic sampling from pits/trenches/outcrops/workings etc. spaced closely enough to confirm geological
and grade continuity for other stages of geological assessment.
(c) Geological logging and sampling of drill core/chip samples at regular interval, preferably meter wise or less
for the mineralized portions.
(d) The drill technique to be deployed shall depend on the rock type to be penetrated and with an aim to achieve
maximum sample/core recovery.
(e) The exploration samples including surface samples, drill core/ chip samples shall be preserved, for future use.
6 Assay data & Laboratory tests: Analysis of all samples generated for major radicals appropriate to the mineral
under investigation. Analysis of byproducts such as Ga in bauxite, Ni, PGE in chromite, Au in iron ore, Ag in
lead and zinc, Au in copper ore etc. and other deleterious elements wherever necessary.
7 Petrographic & Mineragraphic studies: Petrographic analysis of mineralized portions to ascertain the rock
types and mineral assemblages including grain size, texture, gaunge and its liberation characteristics etc. if
considered necessary.
8 Bulk density study: The bulk density must be measured by methods that adequately account for incipient void
spaces (vugs, porosity, etc.)in mineral /ore body
9 Bulk Sampling for Beneficiation studies: Bulk sampling if necessary for testing processing technology.
10 Environmental setting: Details about local infrastructure, host population, historical sites, forests, sanctuaries,
national park and base line information on environmental setting of the area to be collected.
11 Any other relevant data: Groundwater, geotechnical and rock characteristics etc. that may be relevant.
Part -III
Exploration Norms for different types of deposits
(The grid spacing given below are indicative. A closer spacing may be necessary depending upon the
geological complexity of the deposit)
Type of deposit & G4 stage G3 stage G2 stage G1 stage Remarks
principal minerals
I. Bedded Stratiform Scout drilling, if For limestone, For For limestone, For shallow
and tabular deposits of necessary bauxite, potash limestone, bauxite, potash surficial
regular and irregular (In line with and salt beds the bauxite, and salt beds the deposits
habit: grid specified by grid spacing of potash and grid spacing of continuing to a
Iron ore, manganese ore, the Central bore holes may be salt beds the bore holes may depth of up to
bauxite, limestone, Government 800m or closer grid spacing be 200m or 6m from
chromite/potash and salt from time to for deposits of of bore holes closer for regular surface pitting
beds etc. time) regular habit and may be 400m habit and 100m in a grid
400m or closer or closer for or closer for pattern as per
for irregular regular habit irregular habit; the grid
habit; for others and 200m or for others the spacing for
¹Hkkx IIµ[k.M 3 (i)º Hkkjr dk jkti=k % vlk/kj.k 21
may be
required at
each stage.
Laboratory
scale
separation and
testing and
analysis of
concentrates.
*In case replenishment is reported in placer deposit associated with beach sand, river sand etc., periodic
reassessment of resources may be necessary.
Part IV-A
Reporting of Mineral Resources
A Geological Study Report for estimation and reporting of Mineral Resources integrating all data of
exploration, sampling and testing generated through aerial, geophysical, geochemical, geological surveys and
technological study may be undertaken for every stage of exploration i.e. from G4 to G1 for assessing the
resources. The study should incorporate the following contents among other things.
Sl. Contents Explanation
No.
1 Title & Ownership -Name, address of the prospector including E-mail ID, telephone number.
-Details of period of prospecting/mineral right if any.
-Details of exploration agency, qualification, experience of associated technical persons
engaged in exploration.
2 Details of the area -Village, District, State
- Survey of India Toposheet No., Geo-coordinates of the area of all corner points
- cadaster details of the area with land use, area under forest with type of forest
- mineral(s) under investigation
3 Infrastructure & -Local infrastructure, host population, historical sites, forests, sanctuaries, national park
Environment and environmental settings of the area.
4 Previous -Details of previous exploration carried out by other agencies/parties.
exploration - In case the area forms part of the area covered under earlier exploration then the same
should be shown in a map with proper scale.
5 Geology -Brief regional geology of the area outlining the broad geological, structural frame work.
-Deposit type, geological setting and details of dip, strike, old workings, surface
exposures etc. of the area under study also of adjoining nearby areas if the information is
likely to have an impact on the area under study.
-Reliable geological map of appropriate scale with geo-coordinates showing major
lithological units, structural & tectonic features; extent of surface mineralisation,
structure, location of boreholes, pits, trenches, old workings etc.
- Cross sections at suitable intervals showing vertical projections of litho-units and
mineralization.
- The extent and variability of the mineralization expressed as length (along strike or
otherwise), plan width, and depth below surface to the upper and lower limits of the
Mineral Resource.
6 Aerial/ground Details of aerial, geophysical & geochemical survey results taken up if any and their
geophysical/ results.
geochemical data
7 Technological -Details of technological investigation (pitting/trenching/drilling etc.)
investigation -Data spacing for reporting of Exploration Results: Whether the data spacing and
distribution is based on part I and II of the schedule and is sufficient to establish the
¹Hkkx IIµ[k.M 3 (i)º Hkkjr dk jkti=k % vlk/kj.k 23
degree of geological and grade continuity appropriate for the Mineral Resource
estimation procedure(s) and classifications applied.
8 Location of data -Accuracy and quality of surveys used to locate drill holes (collar and down-hole
points. surveys), trenches, mine workings and other locations used in Mineral Resource
estimation.
- Quality and adequacy of topographic control.
9 Sampling Nature and quality of sampling (e.g. cut channels, random chips etc.) and measures taken
Technique to ensure sample representivity.
10 Drilling - Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast, auger,
technique& drill Bangka, sonic etc.) and details (e.g. core diameter, triple or standard tube, collar R.L,
sampling employed azimuth, inclination, coordinates of bore holes etc.).
-Whether core and chip sample recoveries have been properly recorded and results
assessed.
-Measures taken to maximise sample recovery and ensure representative nature of the
samples.
- Whether a relationship exists between sample recovery and grade and whether sample
bias may have occurred due to preferential loss/gain of fine/coarse material.
Logging: -Whether core and chip samples have been logged to a level of detail to support
appropriate Mineral Resource estimation, mining studies and metallurgical studies.
11 Sub-sampling -If core, whether cut or sawn and whether quarter, half or all core taken.
techniques and -If non-core, whether riffled, tube sampled, rotary split etc. and whether sampled wet or
sample preparation dry.
-For all sample types, the nature, quality and appropriateness of the sample preparation
technique.
-Quality control procedures adopted for all sub-sampling stages to maximize
representivity of samples.
-Measures taken to ensure that the sampling is representative of the in situ material
collected.
-Whether sample sizes are appropriate to the grain size of the material being sampled.
12 Quality of assay The nature, quality and appropriateness of the assaying and laboratory procedures used
data and laboratory and whether the technique is considered partial or total.
tests Nature of quality control procedures adopted (e.g. standards, blanks, duplicates, external
laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and
precision have been established.
Check analysis of atleast 10% of samples may be analyzed from third party NABL
accredited/or department of science & technology (DST) / BIS recognized laboratories or
government laboratories for assessing the acceptable levels of accuracy.
13 Moisture. -Whether the tonnages are estimated on a dry basis or with natural moisture, and the
method of determination of the moisture content.
14 Bulk Density Whether assumed or determined. If assumed, the basis for the assumptions. If
determined, the method used, whether wet or dry, the frequency of the measurements, the
nature, size and representativeness of the samples.
15 Resource - Discussion on sufficient data density to assure continuity of mineralization and
estimation synthesis adequate data base for estimation procedure used.
techniques -The nature and appropriateness of the estimation technique(s) applied and key
assumptions, including treatment of extreme grade values, domaining, interpolation
parameters, maximum distance of extrapolation from data points.
-The basis for the classification of the Mineral Resources into varying confidence
categories.
-The assumptions made regarding recovery of byproducts.
-Detailed description of the method used and the assumptions made to estimate tonnages
and grades (section, polygon, inverse distance, geostatistical, or other method).
24 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
-Description of how the geological interpretation was used to control the resource
estimates.
-Discussion of basis for using or not using grade cutting or capping. If a computer
method was chosen, description of programmes and parameters used.
-Geostatistical methods are extremely varied and should be described in detail. The
method chosen should be justified. The geostatistical parameters, including the
variogram, and their compatibility with the geological interpretation should be discussed.
Experience gained in applying geostatistics to similar deposits should be taken into
account.
-Data verification and /or validation procedures used.
16 Further work -The nature and scale of planned further work (e.g. tests for lateral extensions or depth
extensions or large scale step-out drilling).
17 Annexures/ The report shall include all relevant data including maps, sections, logs, analysis reports,
enclosures to the photographs etc. in support of the estimates made.
report
18 Any other Any other information as may be available or required by any authority as prescribed
information
Part IV-B
Estimation and Reporting of Diamonds and other Gemstones
Criteria listed in Part IVA also apply to this group; additional guidelines are available in the ‘Guidelines for
the Reporting of Diamond Exploration Results’ issued by the Diamond Exploration Best Practices Committee
established by the Canadian Institute of Mining, Metallurgy and Petroleum.
1 Indicator minerals - Reports of indicator minerals, such as chemically/physically distinctive garnet, ilmenite,
chrome spinel and chrome diopside, should be prepared by a suitably qualified
laboratory.
2 Source of - Details of the form, shape, size and colour of the diamonds and the nature of the source
diamonds. of diamonds (primary or secondary) including the rock type and geological environment.
3 Sample collection. - Type of sample, whether outcrop, boulders, drill core, reverse circulation drill cuttings,
gravel, stream sediment or soil, and purpose, e.g. large diameter drilling to establish stones
per unit of volume or bulk samples to establish stone size distribution.
- Sample size, distribution and representativity.
4 Sample treatment. -Type of facility, treatment rate, and accreditation.
- Sample size reduction. Bottom screen size, top screen size and re-crush.
- Processes (dense media separation, grease, X-ray, hand-sorting etc.).
- Process efficiency, tailings auditing and granulometry.
- Laboratory used, type of process for micro diamonds and accreditation.
5 Carat. One fifth (0.2) of a gram (often defined as a metric carat or MC).
6 Sample grade. - Sample grade in this section is used in the context of carats per units of mass, area or
volume.
- The sample grade above the specified lower cut-off sieve size should be reported as
carats per dry metric tonne and/or carats per 100 dry metric tonnes. For alluvial deposits,
sample grades quoted in carats per square metre or carats per cubic metre are acceptable if
accompanied by a volume to weight basis for calculation.
- In addition to general requirements to assess volume and density there is a need to relate
stone frequency (stones per cubic metre or tonne) to stone size (carats per stone) to derive
sample grade (carats per tonne).
7 Reporting of Bulk - Complete set of sieve data using a standard progression of sieve sizes per facies.
Exploration sampling results, global sample grade per facies. Spatial structure analysis and grade
Results. distribution. Stone size and number distribution. Sample head feed and tailings particle
granulometry.
- Sample density determination.
- Per cent concentrate and undersize per sample.
¹Hkkx IIµ[k.M 3 (i)º Hkkjr dk jkti=k % vlk/kj.k 25
-The choice of, the nature and the appropriateness of the selected mining method(s), the size of
the selected mining unit (length, width, height) and other mining parameters including
associated design issues such as pre-strip, access, etc.
-The assumptions made regarding geotechnical parameters (eg. pit slopes, stope sizes, etc.),
grade control and pre-production drilling.
-The major assumptions made and Mineral Resource model used for pit optimisation (if
appropriate).
-The mining dilution factors, mining recovery factors, and minimum mining widths used.
-The infrastructure requirements of the selected mining methods. Where available, the historic
reliability of the performance parameters.
4 Metallurgical -The metallurgical process proposed and the appropriateness of that process to the type of
factors or deposit.
assumptions. -The nature, amount and representativeness of metallurgical test work undertaken and the
metallurgical recovery factors applied.
-Any assumptions or allowances made for deleterious elements.
-The existence of any bulk sample or pilot scale test work and the degree to which such
samples are representative of the ore body as a whole.
-The tonnages and grades reported for Mineral Reserves should state clearly whether these are
in respect of material to the plant or after recovery. Comment on existing plant and equipment,
including an indication of replacement and salvage value.
5 Cost and -The derivation of, or assumptions made, regarding projected capital and operating costs.
revenue - The assumptions made regarding revenue including head grade, metal or commodity price(s)
factors exchange rates, transportation and treatment charges, penalties, etc.
- The allowances made for royalties payable, both Government and private.
- Basic cash flow inputs for a stated period.
-Yearly planned production, Net Present Value (NPV) and Internal Rate of Return (IRR) of the
deposit, intrinsic value of the deposit based on annual projected production.
6 Market -The demand, supply and stock situation for the particular commodity, consumption trends and
assessment factors likely to affect supply and demand into the future.
-A customer and competitor analysis along with the identification of likely market windows for
the product.
-Price and volume forecasts and the basis for these forecasts.
-For industrial minerals the customer specification, testing and acceptance requirements prior
to a supply contract.
7 Other -The effect, if any, of natural risk, infrastructure, environmental, legal, marketing, social or
modifying governmental factors on the likely viability of a project and/or on the estimation and
factors classification of the Mineral Reserves.
-The status of titles and approvals critical to the viability of the project, such as mining leases,
discharge permits, government and statutory approvals.
-Environmental descriptions of anticipated liabilities. Location plans of mineral rights and
titles.
8 Classification. -The basis for the classification of the Mineral Reserves into varying confidence categories.
- Finalization of estimates of grade wise mineable quantities in contemplation with proposed
preliminary mine design/conceptual plan subject to all necessary approvals/contracts have been
confirmed or there are reasonable expectations that all such approvals/contracts will be
obtained within a reasonable timeframe and with certification that that Economic viability is
not affected by short‐term adverse market conditions provided that longer‐term forecasts
remain positive.