Professional Documents
Culture Documents
+33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
Our company has vast experience in manufacturing lifting devices. H94 stamp
In 1989 we received the H94 stamp from the German organisation
Berufsgenossenschaft. We are also a member of the working group
developing the new European norms for lifting fittings.
CE Logo
Our commitment to meet the most rigorous standards and our fully
integrated manufacturing facilities (design, tooling, forge, heat treatment, machi-
Brand name
ning, painting) enable us to offer products of incomparable quality
and performance. Made in France. It is the reason why we assure you: Alloy steel grade 8
Reference number
Size
A quality insurance as per the ISO 9001 vers. 2000
An integrated computer aided design
A cast identification code stamped on each product
Identification example
An identification as per the attached example
A Berufsgenossenschaft H94 stamp
H94 CE Excel GK2 10-8
A conformity with European norms especially for :
The resistance to fracture
The resistance to fatigue
The F1 and F2 latch resistance
100% magnetic particle testing
A 4:1 design factor
A conformity certificate is supplied with each delivery.
Table of contents
Codes Page
Alphabetical table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Stainless steel
WLL Table and warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Welded Master links - Tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSI-MTSI-TAGI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Omega link- Connector - Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . COI-MJI-CI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Eye and clevis sling hooks - Eye nut. . . . . . . . . . . . . . . . . . . . . . . . . CSOI-CSCI-ELI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Eye bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ALI-AAI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Shackles - Weld-on transport ring . . . . . . . . . . . . . . . . . . . . . . . . . . . MDVI-MLVI-PASI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Grade 8
WLL Table and warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Welded Master links. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MS-MTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Pear shape link – Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MP-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CO-MJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Eye and clevis sling hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CSO-CSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Swivel sling hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CSE-CSEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Eye and clevis self locking hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . XLO-XLC-GKO-GKC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
Swivel and shank self locking hooks. . . . . . . . . . . . . . . . . . . . . . . . . XLE-XLT-GKE-GKT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17
Shortening self locking hook and clutches . . . . . . . . . . . . . . . . . . . . XLR-GC-GCV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Shortening hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CRO-CRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Waterproof hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CPE-XLP-XLB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25
Swivels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ELD-EBC-EC-OLEC-ALEC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-26
Excavator hook – Foundry hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . GH-CFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Web sling hook and connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . CST-COS-MJS-XLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29
Shackles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MDV-MLV-MDB-MLB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31
Identification Tag and spare kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . TAG-VR-RCOS-AC-RMJ-LF-VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-34
Load indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Grade 10
WLL Table and warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Welded Master links. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UMS-UMTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Omega and Pear shape links – Chain . . . . . . . . . . . . . . . . . . . . . . . . UCO-UC-UMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Swivel and clevis self locking hooks . . . . . . . . . . . . . . . . . . . . . . . . . UXLE-UXLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Shortening self locking hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UXLR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Clevis sling hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UCSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Eye foundry hook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UCFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Shortening clutches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UGC-UGCV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Lifting eyes
Eye bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Eye nut - Hoist rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EL-ALS-ADA-OL-AAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-23
Lashing
S hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-SO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Lashing hook - Weld-on Transport Ring . . . . . . . . . . . . . . . . . . . . . . PAS-CAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Loadbinder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TAC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
1
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Chain Ø
1 leg sling 2 leg sling 3 or 4 leg sling
Endless sling
0°<ß≤ 45° 45°<ß≤ 60° 0°<ß≤ 45° 45°<ß≤ 60°
90° 0°<α≤ 90° 90°<α≤ 120° 0°<α≤ 90° 90°<α≤ 120°
Safety Factor 1.4 Safety Factor 1.0 Safety Factor 2.1 Safety Factor 1.5 Safety Factor 1.6
6 0.70 1.00 0.70 1.47 1.05 1.12
8 1.20 1.70 1.20 2.50 1.80 1.92
10 1.60 2.25 1.60 3.36 2.40 2.56
13 2.70 3.80 2.70 5.70 4.05 4.32
Stainless steels:
Most steels, except precious steels such as platinum and gold, tend to corrode when contacting the atmosphere, water or other natural
or industrial environments.
Stainless steel:
Stainless steels are a possible solution to corrosion problems.
Contrary to the steels used in grade 8 and 10 lifting components, the stainless steel used in our range of components do not
react to heat treatment in the same way. The mechanical properties of the stainless steel cannot be modified by heat treatment.
This steel has to be hyperquenched, which makes it more corrosion resistant.
Acid cleaning and polishing further improve the anti corrosive properties.
Resistance to corrosion:
The stainless steel used in our range has an excellent resistance to corrosion in following environments :
- natural (waters, city and landscape atmospheres)
- industry, even in presence of moderated concentrations of chlorides and acidics.
- food industries, involving acids (sulfur, phosphorus and organic) and chloride chemical environments.
We can supply on request a table showing the suitability of our products when used in different chemical solutions.
2
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Stainless steel
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
The welded master links are designed for 1 or 2 leg slings (code MSI) and for 3 or 4 leg slings (code MTSI).
The master link assemblies (code MTSI) have a flat in order to make assembly with omega links (code COI) easier.
MSI
S/s Welded master link 316 L/1.4404
1 leg 2 legs A B C t t Kg
45˚ 60˚
MS 13 I 6 - 6 110 60 13 0.75 3.0 0.34
MS 16 I 8 6 8 110 60 16 1.25 5.0 0.53
MS 18 I 10 8 10 135 75 18 2.00 8.0 0.82
MS 22 I 13 10 13 160 90 22 3.20 12.8 1.50
MS 26 I 16 13 16 180 100 26 5.00 20.0 2.31
MTSI
S/s Master link assembly 316 L/1.4404
TAGI
S/s identification tag 316/1.4401
These stainless steel tags have the advantage that they can be fixed on most types of
machinery & slings. We can pre-stamp them according to your needs and norms, to identify
chain and wire rope slings.
A B C* Kg
TAGI 50 80 300 0.08
3
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Stainless steel
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
COI
S/s Omega link 316 L/1.4404
It is an easy and safe connection between the chain and the components.
t mm A B C t Kg
CO 6 I 0.70 6 25 20 9 2.8 0.07
CO 7/8 I 1.20 7/8 34 23 16 4.8 0.16
CO 10 I 1.60 10 41 31 17 6.4 0.28
CO 13 I 2.70 13 54 40 21 10.8 0.63
MJI
S/s Chain Connector 316 L/1.4404
These connectors provide fast, easy assembly without the need for special tools or skills.
Designed for attaching hooks, master links and other end fittings to stainless steel chains.
t mm A B C t Kg
MJ 6 I 0.70 6 45 41 16 2.8 0.12
MJ 7/8 I 1.20 7/8 55 52 20 4.8 0.16
MJ 10 I 1.60 10 73 70 25 6.4 0.33
MJ 13 I 2.70 13 92 85 29 10.8 0.70
CI
S/s Lifting Chain 316/1.4401
Excel chain features: - Available in polished finish.
- Delivered in standard lengths or in cut lengths on request.
4
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Stainless steel
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
Thanks to its unique design, the single hook has incomparable qualities. Its forged latch is fitted with a s/s spring and a pin,
which corresponds to the current norms.
CSOI
S/s Eye sling hook 316 L/1.4404
The over dimensioned eye enables easy assembly on wire rope slings (with thimbles).
The flat on the eye makes assembly with an omega link (code COI) easier.
t mm A B P C t Kg
CSO 5/6 I 0.70 5/6 86 24 28 15 2.8 0.25
CSO 7/8 I 1.20 7/8 102 26 29 19 4.8 0.53
CSO 10 I 1.60 10 121 35 31 22 6.4 0.90
CSO 13 I 2.70 13 154 41 40 31 10.8 1.75
CSCI
S/s Clevis sling hook 316 L/1.4404
The clevis type enables a direct connection to the stainless steel chain (code CI).
t mm A B P t Kg
CSC 5/6 I 0.70 5/6 73 16 28 2.8 0.26
CSC 7/8 I 1.20 7/8 95 20 29 4.8 0.49
CSC 10 I 1.60 10 110 24 31 6.4 0.94
CSC 13 I 2.70 13 138 32 40 10.8 1.80
ELI
S/s Eye nut 316 L/1.4404
These eye nuts have a flat section that is designed to accommodate omega links (code COI).
They have ISO metric threads as standard, however other thread types can be supplied on request.
5
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Stainless steel
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
ALI
S/s Eye bolt 316 L/1.4404
These lifting eyes can be used only in their axis (angle must be less than 30°), never in oblique.
The shank length must be adapted to suit the material the eye nut is to be used with.
This length makes the use of a nut possible.
t mm Ø A B L C t Kg
AL 8 I 0.20 8 12 16 20 24 7 1.0 0.05
AL 10 I 0.40 10 14 19 22 30 8 2.0 0.07
AL 12 I 0.60 12 16 23 27 36 10 3.0 0.13
AL 14 I 0.80 14 18 28 30 40 14 4.0 0.24
AL 16 I 1.00 16 22 30 35 55 14 5.0 0.36
AL 18 I 1.50 18 26 34 40 59 16 7.5 0.38
AL 20 I 2.00 20 26 34 40 59 16 10.0 0.55
AL 22 I 2.50 22 30 42 55 64 20 12.5 0.73
AL 24 I 3.00 24 30 42 55 64 20 15.0 1.08
Safety factor 5.
AAI*
S/s Hoist ring 304/1.4301
These metric hoist rings can rotate 360° and pivot 180° to absorb any movement from
unbalanced loads. Easy to fit, by simply screwing the ring onto the part to be lifted. Use
instructions are supplied with each delivery.
t mm A B C D E F G H t Kg
AA0.2 I 0.20 M8x1.25 11 32 18 10 13 68 47 25 1.0 0.17
AA0.25 I 0.25 M10x1.50 11 30 18 10 18 68 47 25 1.2 0.17
AA0.5 I 0.52 M12x1.75 22 60 30 19 19 121 89 51 2.6 1.08
AA0.5 LI 0.52 M12x1.75 22 110 30 19 19 171 89 51 2.6 1.08
AA0.9 I 0.95 M16x2.00 22 56 30 19 29 121 89 51 4.7 1.12
AA0.9 LI 0.95 M16x2.00 22 106 30 19 29 171 89 51 4.7 1.12
AA1 I 1.07 M20x2.50 22 52 30 19 34 121 89 51 5.3 1.19
AA1 LI 1.07 M20x2.50 22 102 30 19 34 171 89 51 5.3 1.19
AA1.5 I 1.50 M20x2.50 36 78 43 25 32 166 131 76 7.5 3.03
AA1.5 LI 1.50 M20x2.50 36 118 43 25 32 206 131 76 7.5 3.03
AA2.1 I 2.10 M24x3.00 36 74 43 25 37 166 131 76 10.5 3.10
AA2.1 LI 2.10 M24x3.00 36 114 43 25 37 206 131 76 10.5 3.10
AA3.5 I 3.50 M30x3.50 45 106 54 32 42 222 165 95 17.5 6.30
AA5.5 LI 5.50 M36x4.00 57 166 71 44 64 317 217 124 27.5 15.50
AA6.25 I 6.25 M42x4.50 57 160 71 44 82 317 217 124 31.2 16.00
AA6.75 I 6.75 M48x5.00 57 154 71 44 82 317 217 124 33.7 16.80
AA11.1 I 11.15 M64x6.00 76 204 103 57 101 428 296 165 55.7 39.00
AA15.7 I 15.75 M72x6.00 95 220 133 70 132 495 359 206 78.7 74.00
AA22.3 I 22.30 M90x6.00 102 235 153 83 177 561 404 218 111.5 118.00
* on request.
Safety factor 5.
6
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Stainless steel
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
MDVI
S/s Screw type dee shackle 316/1.4401
These forged shackles guarantee high quality and performance.
t A F B C t Kg
MDV 0.4 I 0.40 32 8 8 16 2.0 0.07
MDV 0.6 I 0.60 38 9.5 10 20 3.0 0.11
MDV 0.9 I 0.90 50 12 12 25 4.5 0.25
MDV 1.5 I 1.50 52 13 16 24 7.5 0.40
MDV 2.5 I 2.50 65 16 20 28 12.5 0.60
MDV 3 I 3.00 72 19 22 30 15.0 0.90
MDV 4 I 4.00 78 19 25 32 20.0 1.10
MDV 6 I 6.00 94 25 30 40 30.0 2.40
MLVI
S/s Screw type dee shackle 316/1.4401
Screw type anchor shackles feature an open throat design that permits free line movement
without undue wear. The wide bow allows ample clearance for thimbles and turnbuckles.
These forged shackles guarantee high quality and performance.
t A F B C D t Kg
MLV 0.4 I 0.40 30 8 8 16 23 2.0 0.07
MLV 0.6 I 0.60 36 9.5 10 20 27 3.0 0.11
MLV 0.9 I 0.90 47 12 12 25 37 4.5 0.25
MLV 1.5 I 1.50 47 13 16 25 33 7.5 0.37
MLV 2.5 I 2.50 60 16 20 28 42 12.5 0.65
MLV 3 I 3.00 67 19 22 30 51 15.0 1.00
MLV 4 I 4.00 84 22 25 36 57 20.0 1.70
MLV 6 I 6.00 95 25 30 40 66 30.0 2.50
PASI
S/s Weld-on transport ring 316 Ti/1.4571
Welding must only be carried out by a qualified welder, in accordance with DIN EN 287-1.
The surfaces to be welded must be clean, without oil, grease or paint...
Welding instructions are supplied with each delivery.
t A B C t Kg
PAS 0.75 I 0.75 42 40 13 3.0 0.40
PAS 1.25 I 1.25 49 45 18 5.0 0.60
PAS 3.20 I 3.20 57 55 22 12.8 1.20
PAS 5 l 5.00 67 70 26 20.0 2.40
7
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Chain Ø
2 leg sling 3 or 4 leg sling
Endless sling
1 leg sling 0°<ß≤ 30° 30°<ß≤ 45° 45°<ß≤ 60° 0°<ß≤ 30° 30°<ß≤ 45° 45°<ß≤ 60°
0°<α≤ 60° 60°<α≤ 90° 90°<α≤ 120° 0°<α≤ 60° 60°<α≤ 90° 90°<α≤ 120°
Safety Factor 1.73 Safety Factor 1.4 Safety Factor 1.0 Safety Factor 2.6 Safety Factor 2.1 Safety Factor 1.5 Safety Factor 1.6
mm t t t t t t t t
6 1.12 1.94 1.60 1.12 2.90 2.36 1.70 1.80
7 1.50 2.60 2.12 1.50 3.90 3.15 2.24 2.50
8 2.00 3.46 2.80 2.00 5.20 4.25 3.00 3.15
10 3.15 5.45 4.25 3.15 8.20 6.70 4.75 5.00
13 5.30 9.20 7.50 5.30 13.80 11.20 8.00 8.50
16 8.00 13.80 11.20 8.00 20.80 17.00 11.80 12.50
20 12.50 21.60 17.00 12.50 32.50 26.50 19.00 20.00
22 15.00 26.00 21.20 15.00 39.00 31.50 22.40 23.60
26 21.20 36.70 30.00 21.20 55.00 45.00 31.50 33.50
32 31.50 54.50 45.00 31.50 82.00 67.00 47.50 50.00
It is important to refer to norm EN818-4 for more detailed specifications and assembly instructions of grade 8 slings. This European norm harmonises
with the requirements of the Machine Directive. When using our components with wire rope or webbing slings, please refer to the corresponding
norms.
Each component of a chain sling must conform to following standards:
EN818-2 for the chain and EN1677 for the other components (master links, hooks, connectors, etc.).
Slings must be assembled so that accidental disassembly of any component can not occur. For a chain sling, the mechanically assembled connectors
must have a working load limit (WLL) which is not less than the WLL of the chain they are to be connected to. The components of the chain sling must
conform to the instructions given in the previous paragraph.
The WLL of the multi leg slings must be calculated only for symetric loads, in accordance with the above mentioned table. Each sling must have a WLL
for angles between 0° and 45° or complementary WLL for angles from 45° to 60°.
Each chain sling must have an identification tag permanently connected to the master link, and must show the following information:
➩ the WLL in tonnes (and the angles for the multi leg slings from 0° to 45° ). i.e. 16t 0° to 45°.
➩ the identification batch of the sling (mentioned in the certificate).
➩ the sling grade, i.e. 8.
➩ the name or the symbol of the sling manufacturer.
➩ the number of legs.
For multi leg slings, the identification tag can indicate the WLL applicable for an angle of 45° to 60°.
Each sling must be delivered with a dated certificate conforming to EN818-4 and indicating the following:
➩ the name of the sling manufacturer or supplier,
➩ the date of establishing the certificate and its authentication,
➩ the number and relevant section of EN818,
➩ the number or the symbol which identifies the sling,
➩ a description of the components of the sling,
➩ the size and length of the chain and grade 8,
➩ the WLL,
➩ the name of the competent person or the company having made the visual inspection (in the case of a mechanically assembled sling not
submitted to proof load after assembly).
Instructions for use concerning each type and grade of chain, must be delivered with the chain, and must conform to the corresponding
clauses of the EN818-6.
8
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
The welded master links are designed for the 1 or 2 leg (code MS) and 3 or 4 leg slings (code MTS).
They have a flat in order to make assembly with omega links (code CO) easier.
MS ■
Welded master link Norm EN 1677-4
MTS ■
Master link assembly Norm EN 1677-4
Chain Ø
Dimensions in mm WLL BF Weight
Code ß
30˚ 45˚ 60˚ A B ØC E a b Dia t t Kg
MTS 16 - 6 6/7 120 70 16 6.7 100 60 13 2.5 10.0 1.20
MTS 18 6 7 8 135 75 18 7.4 100 60 16 3.5 14.0 1.80
MTS 22 7/8 8 10 150 90 22 8.9 120 70 18 6.5 26.0 2.90
MTS 25 10 10 13 170 95 25 10.6 120 70 20 8.5 34.0 3.90
MTS 28 - - - 200 120 28 11.0 120 70 20 10.0 40.0 4.90
MTS 30 - 13 16 200 120 30 13.4 135 75 22 13.0 52.0 6.00
MTS 36 13 116 18/19 250 150 36 16.6 135 75 25 17.0 68.0 9.60
MTS 38 - - 20 250 150 38 17.1 170 95 28 20.0 80.0 12.60
MTS 44* 16/18 18/19/20 22 280 170 44 18.0 200 120 33 27.0 108.0 19.70
MTS 45* 19 - - 300 200 45 20.0 200 120 36 30.0 120.0 22.50
MTS 50* 20/22 22 26 300 200 50 21.0 150 90 38 40.0 160.0 24.50
MTS 55* - 26 32 300 200 55 23.0 150 90 38 50.0 200.0 28.00
MTS 58** 26 - - 350 200 58 - 150 90 42 60.0 240.0 34.60
MTS 70** - 32 - 400 250 70 - 300 150 55 80.0 320.0 74.70
MTS 80** 32 - - 400 250 80 - 300 150 58 100.0 400.0 92.40
* unpainted.
** without flat and unpainted.
ß: see on page 8.
9
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
MP ■■
Pear shape link
The pear shape link is designed for use in one leg slings.
This clevis eliminates the need for a connecting link. It can be used in a sliding sling.
t mm A B C t Kg
MP 5/6 1.12 5/6 82 33 64 4.5 0.13
MP 7/8 2.00 7/8 90 41 70 8.0 0.27
MP10 3.15 10 110 50 87 12.6 0.61
MP 13 5.30 13 147 66 116 21.2 1.38
MP 16 8.00 16 185 84 148 32.0 2.71
MP 18/20 12.50 18/20 242 104 198 50.0 4.20
C ■■
Lifting Chain Grade 8 Norm EN 818-2
* According to deliveries.
10
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
CO ■■
Omega link Norm EN 1677-1
The omega link is an alternative to the connecting link (code MJ). It is an easy and safe
connection between the chain and the components. It is more compact than a connecting link.
t mm A B C t Kg
CO 5/6 1.12 5/6 25 20 9 4.5 0.07
CO 7/8 2.00 7/8 34 23 16 8.0 0.16
CO 10 3.15 10 41 31 17 12.6 0.28
CO 13 5.30 13 54 40 21 21.2 0.63
CO 16 8.00 16 64 48 26 32.0 1.13
CO 18/20 12.50 18/20 82 59 35 50.0 2.03
MJ ■■
Chain Connector Norm EN 1677-1
These connectors provide fast, easy assembly without the need for special tools or skills.
Designed for attaching hooks, master links and other end fittings to Grade 8 alloy steel chains.
t mm A B C t Kg
MJ 6 1.12 6 45 40 15 4.5 0.14
MJ 7/8 2.00 7/8 54 52 20 8.0 0.15
MJ 10 3.15 10 63 65 25 12.6 0.32
MJ 13 5.30 13 84 82 30 21.2 0.68
MJ 16 8.00 16 104 103 36 32.0 1.26
MJ 18/20 12.50 18/20 127 120 45 50.0 2.02
MJ 22 15.00 22 155 144 51 60.0 3.18
MJ 26 21.20 26 160 172 57 84.8 4.52
MJ 32 31.50 32 174 197 69 126.0 8.20
11
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
Thanks to its unique design, the single hook has incomparable qualities. Its forged latch is fitted with a s/s spring
and a high resistance pin, which corresponds to the current norms.
CSO ■■
Eye sling hook Norm EN 1677-2
The over dimensioned eye enables easy assembly on wire rope slings (with thimbles).
The flat on the eye makes assembly with an omega link (code CO) easier.
t mm A B C P t Kg
CSO 5/6 1.12 5/6 86 24 15 28 4.5 0.25
CSO 7/8 2.00 7/8 102 26 19 31 8.0 0.53
CSO 10 3.15 10 121 35 22 30 12.6 0.90
CSO 13 5.30 13 154 41 31 39 21.2 1.75
CSO 16 8.00 16 190 53 39 47 32.0 2.83
CSO 18/20 12.50 18/20 235 61 42 64 50.0 5.20
CSO 22 15.00 22 271 71 50 71 60.0 8.20
CSO 26* 21.20 26 251 48 54 83 84.8 10.30
CSO 32* 31.50 32 292 59 67 118 126.0 16.40
CSC ■■
Clevis sling hook Norm EN 1677-2
The clevis type enables a direct connection to the grade 8 chain (code C).
t mm A B P t Kg
CSC 5/6 1.12 5/6 73 16 28 4.5 0.26
CSC 7/8 2.00 7/8 95 20 29 8.0 0.49
CSC 10 3.15 10 110 24 31 12.6 0.94
CSC 13 5.30 13 138 32 40 21.2 1.80
CSC 16 8.00 16 162 40 47 32.0 3.00
CSC 18/20 12.50 18/20 192 44 64 50.0 4.90
CSC 22 15.00 22 230 49 60 60.0 8.52
12
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
CSE ■■
Swivel sling hook Norm EN 1677-2
The large eye enables easy assembly on wire rope slings (with thimbles). There is also a flat on
the eyes to fit omega links (code CO). All of these hooks have a needle roller thrust bearing in
the swivel as a standard. This feature enables smooth, easy rotation under load.
t mm A D E P t Kg
CSE 5/6 1.12 5/6 101 30 33 28 4.5 0.40
CSE 7/8 2.00 7/8 121 32 31 29 8.0 0.77
CSE 10 3.15 10 147 37 40 31 12.6 1.41
CSE 13 5.30 13 185 48 46 40 21.2 2.53
CSE 16 8.00 16 211 58 58 47 32.0 3.90
CSE 18/20 12.50 18/20 265 73 56 64 50.0 6.81
CSEC ■■
Swivel sling hook with clevis Norm EN 1677/2
This hook combines ease of attachment via a clevis (direct assembly to the chain), with the
advantages of a ball bearing swivel system, which rotates under full load.
t mm A B C P t Kg
CSEC 6 1.12 5/6* 111 15 34 28 4.5 0.44
CSEC 7/8 2.00 7/8 172 20 40 29 8.0 0.85
of
Waterpro
CSEC 10 3.15 10 210 24 47 31 12.6 1.55
CSEC 13 5.30 13 260 31 60 40 21.2 2.78
CSEC 16 8.00 16 301 34 72 47 32.0 4.30
13
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
XL self-locking hooks are traditional sized hooks (compared to the more compact GK models). The larger release
mechanism makes them easier to use with gloves and are therefore recommended for the construction industry.
Its rivetted assembly process makes it the safest on the market.
XLO ■■
Eye self locking hook Norm EN 1677-3
The large eye enables easy assembly on wire rope slings (with thimbles).
The flat on the eyes makes assembly with omega links (code CO) easier.
Chain
Code WLL Dimensions in mm BF Weight
Ø
t mm A B C D P t Kg
XLO 0 1.12 5/6 113 16 26 24 32 4.5 0.48
XLO 1 2.00 7/8 132 24 31 29 44 8.0 0.90
XLO 2 3.15 10 167 32 37 36 49 12.6 1.69
XLO 3 5.30 13 194 37 47 47 64 21.2 3.28
XLO 4 8.00 16 244 39 57 60 78 32.0 6.04
XLO 5 12.50 18/20 284 51 59 70 92 50.0 9.40
XLC ■■
Clevis self locking hook Norm EN 1677-3
Chain
Code WLL Dimensions in mm BF Weight
Ø
t mm A B C D P t Kg
XLC 0 1.12 5/6 92 16 26 28 32 4.5 0.47
XLC 1 2.00 7/8 111 24 31 32 44 8.0 0.90
XLC 2 3.15 10 141 32 37 41 49 12.6 1.72
XLC 3 5.30 13 167 37 47 53 64 21.2 3.21
XLC 4 8.00 16 205 39 57 64 78 32.0 5.93
XLC 5 12.50 18/20 234 51 59 80 92 50.0 9.10
14
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
The GK range of hooks are more compact than traditional self locking hooks. For example, the GKO2 is similar in
dimensions to the XLO1 making it much lighter and easy to handle, but with the WLL of 7/8 mm chain. Its rivetted
assembly process makes it the safest on the market.
GKO ■■
Eye self locking hook Norm EN 1677-3
A flat on the eye enables assembly with omega links (code CO).
Chain
Code WLL Dimensions in mm BF Weight
Ø
t mm A B C D P t Kg
GKO 1 2.00 7/8 115 16 26 25 33 8.0 0.52
GKO 2 3.15 10 134 24 30 30 44 12.6 0.95
GKO 3 5.30 13 171 32 37 40 47 21.2 1.85
GKO 4 8.00 16 207 37 47 49 64 32.0 3.52
GKO 5 12.50 18/20 257 43 66 61 78 50.0 7.33
GKO 6 15.00 22 284 52 61 72 92 60.0 9.63
GKC ■■
Clevis self locking hook Norm EN 1677-3
Chain
Code WLL Dimensions in mm BF Weight
Ø
t mm A B C D P t Kg
GKC 1 2.00 7/8 96 16 26 32 33 8.0 0.53
GKC 2 3.15 10 113 24 30 42 44 12.6 0.95
GKC 3 5.30 13 140 32 37 53 47 21.2 1.90
GKC 4 8.00 16 167 37 47 64 64 32.0 3.45
GKC 5 12.50 18/20 216 43 66 79 78 50.0 7.20
GKC 6 15.00 22 234 52 61 98 92 60.0 11.00
15
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
XLE ■■
Swivel self locking hook Norm EN 1677-3
The large swivel eye makes assembly to wire rope slings (with thimbles) easier. There is also
a flat on the eyes that enables assembly with omega links (code CO). All of these hooks have
a needle roller thrust bearing in the swivel as a standard. This feature enables smooth, easy
rotation under load.
t mm A B C D E P t Kg
XLE 0 1.12 5/6 122 16 26 30 34 32 4.5 0.73
XLE 1 2.00 7/8 148 24 31 32 40 44 8.0 1.35
XLE 2 3.15 10 183 32 37 37 49 49 12.6 2.45
XLE 3 5.30 13 214 37 47 48 60 64 21.2 4.38
XLE 4 8.00 16 268 39 57 58 59 78 32.0 7.86
XLE 5 12.50 18/20 350 51 59 73 90 92 50.0 12.50
XLT ■
Shank type self locking hook Norm EN 1677-3
These hooks are supplied with unthreaded shanks to enable machining according to your
requirements.
t mm A B C D E P t Kg
XLT 0 1.12 5/6 95 16 26 26 20 32 4.5 0.52
XLT 1 2.00 7/8 113 24 31 36 24 44 8.0 1.00
XLT 2 3.15 10 129 32 37 53 29 49 12.6 1.84
XLT 3 5.30 13 153 37 47 60 34 64 21.2 3.32
16
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
GKE ■■ D
E
The large swivel eye makes assembly to wire rope slings (with thimbles) easier.
There is also a flat on the eyes that enables assembly with omega links (code CO).
A
All of these hooks have a needle roller thrust bearing in the swivel as a standard.
This feature enables smooth, easy rotation under load. P
Chain
C
Code WLL Dimensions in mm BF Weight
Ø B
t mm A B C D E P t Kg
GKE 1 2.00 7/8 122 16 26 32 33 33 8.0 0.78
GKE 2 3.15 10 148 24 30 37 41 44 12.6 1.37
GKE 3 5.30 13 182 32 37 48 49 47 21.2 2.50
GKE 4 8.00 16 211 37 47 58 62 64 32.0 4.51
GKE 5* 12.50 18/20 268 43 66 73 62 78 50.0 8.71
GKE 6 15.00 22 350 52 61 82 90 92 60.0 14.50
GKT ■
Shank type self locking hook Norm EN 1677-3
These hooks are supplied with unthreaded shanks, to enable machining according to your
requirements.
Chain
Code WLL Dimensions in mm BF Weight
Ø
t mm A B C D E P t Kg
GKT 1 2.00 7/8 94 16 26 28 22 33 8.0 0.59
GKT 2 3.15 10 115 24 30 32 24 44 12.6 1.00
GKT 3 5.30 13 125 32 37 53 28 47 21.2 1.85
GKT 4 8.00 16 152 37 47 60 34 64 32.0 3.42
GKT 5 12.50 18/20 200 42 55 69 40 78 50.0 8.71
17
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
XLR ■■
Shortening self locking hook Norm EN 1677-3
The combination hook-shortener gives better productivity with a quick shortening action at the
bottom of the sling.
t mm A B C D E P t Kg
XLR 7/8 2.00 7/8 173 24 31 51 153 44 8.0 1.10
XLR 10 3.15 10 218 32 37 64 192 49 12.6 2.29
XLR 13 5.30 13 267 37 47 83 235 64 21.2 4.20
GC-GCV ■■
Shortening clutch Norm EN 1677-1
Shortening clutches are an essential part of chain slings, used to shorten the lengths of
the chain legs and prevent instability of the loads. Shortening clutches are also available
with a locking system, designed to prevent accidental disengagement of the chain.
18
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
Used to shorten or hold a length of chain. An extra deep, narrow throat engages chain between the links. Cradle grab hooks
provide better chain support than standard grab hooks. Its specific form makes accidental disengagement of the chain
difficult. For intensive use however, we recommend using a shortening clutch (code GC or GCV). Caution: for correct-safe
use, a shortener must be assembled to the master link via 3 links of chain and be independent of the loaded chain leg.
CRO ■■
Eye grab hook Norm EN 1677-1
t mm A B C P t Kg
CRO 7/8 2.00 7/8 51 20 21 10 8.0 0.28
CRO 10 3.15 10 54 29 29 12 12.6 0.55
CRO 13 5.30 13 89 39 44 15 21.2 1.60
CRO 16 8.00 16 104 42 45 19 32.0 2.43
CRO 20* 12.50 20 122 37 37 22 50.0 4.00
CRO 22* 15.00 22 121 45 45 25 60.0 4.73
CRO 26* 21.20 26 158 48 48 30 84.8 9.51
CRO 32* 31.50 32 210 57 57 38 126.0 18.20
CRC ■■
Clevis grab hook Norm EN 1677-1
t mm A P t Kg
CRC 7/8 2.00 7/8 63 10 8.0 0.30
CRC 10 3.15 10 75 12 12.6 0.57
CRC 13 5.30 13 102 15 21.2 1.54
CRC 16 8.00 16 130 19 32.0 2.61
19
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
Our range of lifting eyes comprises 2 types: The AL and EL models are designed for direct vertical lifting, whereas the
OL, PAS, AAN and ADA types are articulated and can be used for either vertical lifting or lateral pulling.
AL ■
Eye bolt
Our extensive range of alloy steel lifting eyes, incorporates 22 different ISO standard threads.
Other special threads such as UNC, Whitworth, etc. are available on request.
These lifting eyes can be used only in their axis (angle must be less than 30°), never in oblique.
This length makes the use of a grade 8 nut possible.
WLL is stamped on the bodies. The minimum factor of safety is 5:1.
Ø ISO Unma-
Code WLL Dimensions in mm BF Weight
M x Pitch chined
t mm Ø A B L C t Kg
AL 6 0.20 M6 x 1.00 12 18 20 20 6 1.0 0.05
AL 8 0.40 M8 x 1.25 12 16 20 24 7 2.0 0.05
AL 10 0.70 M10 x 1.50 14 19 22 30 8 3.5 0.07
AL 12 1.00 M12 x 1.75 16 23 27 36 10 5.0 0.13
AL 14 1.20 M14 x 2.00 18 28 30 40 14 6.0 0.24
AL 16 1.50 M16 x 2.00 22 30 35 55 14 7.5 0.36
AL 18 2.00 M18 x 2.50 22 30 35 54 14 10.0 0.38
AL 20 2.50 M20 x 2.50 26 34 40 59 16 12.5 0.55
AL 22 3.00 M22 x 2.50 29 38 45 66 19 15.0 0.73
AL 24 4.00 M24 x 3.00 30 40 55 84 20 20.0 1.08
AL 27 5.00 M27 x 3.00 30 42 55 81 20 25.0 1.18
AL 30 6.00 M30 x 3.50 40 49 60 100 24 30.0 1.87
AL 33 7.00 M33 x 3.50 40 49 60 100 24 35.0 1.99
AL 36 8.00 M36 x 4.00 41 45 68 118 25 40.0 2.44
AL 39 9.00 M39 x 4.00 41 45 68 118 25 45.0 2.58
AL 42 10.00 M42 x 4.50 50 56 80 135 31 50.0 3.97
AL 45 15.00 M45 x 4.50 50 56 80 135 31 75.0 4.23
AL 48 18.00 M48 x 5.00 72 63 97 145 42 90.0 8.33
AL 52 20.00 M52 x 5.00 72 63 97 145 42 100.0 8.80
AL 56 25.00 M56 x 5.50 72 63 97 145 42 125.0 9.00
AL 60 30.00 M60 x 5.50 72 63 97 145 42 150.0 9.50
AL 64 36.00 M64 x 6.00 72 63 97 145 42 180.0 9.75
Safety factor 5.
Special thread on request.
20
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
EL ■
Eye nut
These eye nuts are Grade 8 alloy steel and have a flat section that is designed to accommo-
date omega links (code CO). They have ISO metric threads as standard, however other thread
types can be supplied on request. (UNC, Whitworth)
Ø ISO
Code Type WLL Dimensions in mm BF Weight
M x Pitch
t mm A B C D t Kg
EL 6 5/6 0.20 M6 x 1.00 45 30 11 16 1.0
EL 8 5/6 0.40 M8 x 1.25 45 30 11 16 2.0 0.15
EL 10 5/6 0.70 M10 x 1.50 45 30 11 16 3.5
EL 12 7/8 1.00 M12 x 1.75 48 32 12 17 5.0
0.25
EL 14 7/8 1.20 M14 x 2.00 48 32 12 17 6.0
EL 16 10 1.50 M16 x 2.00 60 37 14 18 7.5
EL 18 10 2.00 M18 x 2.50 60 37 14 18 10.0 0.40
EL 20 10 2.50 M20 x 2.50 60 37 14 18 12.5
EL 22 13 3.00 M22 x 2.50 75 48 16 23 15.0
EL 24 13 4.00 M24 x 3.00 75 48 16 23 20.0 0.67
EL 27 13 5.00 M27 x 3.00 75 48 16 23 25.0
EL 30 16 6.00 M30 x 3.50 88 58 19 28 30.0
1.20
EL 33 16 7.00 M33 x 3.50 88 58 19 28 35.0
EL 36 18/20 8.00 M36 x 4.00 105 73 24 42 40.0
EL 39 18/20 9.00 M39 x 4.00 105 73 24 42 45.0 1.50
EL 42 18/20 10.00 M42 x 4.50 105 73 24 42 50.0
EL 45 22 15.00 M45 x 4.50 121 82 25 43 75.0
3.00
EL 48 22 18.00 M48 x 5.00 121 82 25 43 90.0
Safety factor 5.
ALS ■
Safety lifting eye
These eye nuts are Grade 8 alloy steel. They rotate 360°. You have to screw them with a
dynamometric key. The cylindric head of the screw prevents any catch by rotation of the eye
nut. They have a flat section that is designed to accommodate omega links (code CO).
They have ISO metric threads as standard.
Ø ISO Hex
Code Type WLL Dimensions in mm BF Weight
M x Pitch key
t mm A B C D L t Kg
ALS 8 5/6 0.40 M8 x 1.25 38 30 11 26 17 8 2.0 0.22
ALS 10 5/6 0.70 M10 x 1.50 36 30 11 28 17 8 3.5 0.24
ALS 12 7/8 1.00 M12 x 1.75 37 32 12 31 21 8 5.0 0.30
ALS 14 7/8 1.20 M14 x 2.00 35 32 12 33 26 8 6.0 0.45
ALS 16 10 1.50 M16 x 2.00 43 37 14 40 26 10 7.5 0.53
ALS 18 10 2.00 M18 x 2.50 41 37 14 42 26 10 10.0 0.68
ALS 20 13 2.50 M20 x 2.50 53 48 16 50 30 12 12.5 0.72
ALS 22 13 3.00 M22 x 2.50 51 48 16 52 35 12 15.0 1.20
ALS 24 16 4.00 M24 x 3.00 64 58 19 57 37 14 20.0 1.80
ALS 27 16 5.00 M27 x 3.00 61 58 19 60 47 14 25.0 1.90
Safety factor 5.
Delivery with screw on request.
21
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
ADA ■
Hoist ring
These hoist rings are Grade 8 alloy steel. They can rotate 360° and pivot 180°. They have ISO
metric threads as standard. The cylindric head of the screw prevents jamming during
rotation of the shackle. The WLL indicated hereunder are given in the worst conditions of use,
i.e. 90°. It is necessary to check the free moving of the pivoting shackle.
Tor-
Code WLL Ø ISO Dimensions in mm Hex BF Weight
que
Key
t mm A B C D E F G I L N.m t Kg
ADA 8 0.40 M8 x 1.25 34 35 15 13 34 44 68 13 18 6 6.5 2.0 0.43
ADA 10 0.70 M10 x 1.5 34 37 15 13 34 44 68 16 18 8 13 3.5 0.43
ADA 12 1.00 M12 x 1.75 34 39 15 13 34 44 68 18 23 10 22 5.0 0.46
ADA 14 1.30 M14 x 2.0 34 41 15 13 34 44 68 21 23 12 35 6.5 0.46
ADA 16 1.60 M16 x 2.0 34 43 15 13 34 53 68 24 23 10 55 8.0 0.47
ADA 18 2.00 M18 x 2.5 34 45 15 13 34 53 68 27 28 10 80 10.0 0.47
ADA 20 2.50 M20 x 2.5 34 47 15 13 34 53 68 30 32 10 110 12.5 0.47
ADA 22 3.00 M22 x 2.5 49 69 26 20 53 70 105 33 33 14 150 15.0 1.85
ADA 24 4.00 M24 x 3.0 49 71 26 20 53 70 105 36 33 14 190 20.0 1.87
ADA 27 5.00 M27 x 3.0 49 65 26 20 53 70 105 40 36 14 280 25.0 1.93
ADA 30 6.30 M30 x 3.5 49 65 26 20 53 70 105 40 45 14 380 31.5 2.00
ADA 33 7.00 M33 x 3.5 65 83 35 29 72 100 146 55 50 19 520 35.0 4.90
ADA 36 10.00 M36 x 4.0 65 83 35 29 72 100 146 55 54 19 600 50.0 5.20
ADA 39 10.00 M39 x 4.0 65 83 35 29 72 100 146 55 54 19 870 50.0 5.30
ADA 42 12.50 M42 x 4.5 65 83 35 29 72 100 146 55 63 19 1000 62.5 5.50
Safety factor 5.
Special thread and length on request.
OL* ■
Small lifting eye
These small lifting eyes are designed for assembly with all EXCEL clevis components.
These combinations result in articulated lifting eyes, capable of lifting angles. Fitting the lifting
eyes is made easier with their 6 sided bases. OL+CO
* The OL corresponds to the lifting eye alone. The other clevis accessory must be ordered seperately.
Possibility to supply a Nylstop screw. OL+MP
22
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
AAN ■
Hoist ring
These metric hoist rings can rotate 360° and pivot 180° without the need to derate the WLL.
Easily fitted, by simply screwing the ring onto the part to be lifted.
Use instructions are supplied with each delivery.
t mm A B C D E F G H t Kg
AA0.4N 0.40 M8 x 1.25 11 32 18 10 13 68 47 25 2.0 0.17
AA0.5N 0.50 M10 x 1.50 11 30 18 10 18 68 47 25 2.5 0.17
AA1N 1.05 M12 x 1.75 22 60 30 19 19 121 89 51 5.2 1.08
AA1LN 1.05 M12 x 1.75 22 110 30 19 19 171 89 51 5.2 1.08
AA1.9N 1.90 M16 x 2.00 22 56 30 19 29 121 89 51 9.5 1.12
AA1.9LN 1.90 M16 x 2.00 22 106 30 19 29 171 89 51 9.5 1.12
AA2.1N 2.15 M20 x 2.50 22 52 30 19 34 121 89 51 10.7 1.19
AA2.1LN 2.15 M20 x 2.50 22 102 30 19 34 171 89 51 10.7 1.19
AA3N 3.00 M20 x 2.50 36 78 43 25 32 166 131 76 15.0 3.03
AA3LN 3.00 M20 x 2.50 36 118 43 25 32 206 131 76 15.0 3.03
AA4.2N 4.20 M24 x 3.00 36 74 43 25 37 166 131 76 21.0 3.10
AA4.2LN 4.20 M24 x 3.00 36 114 43 25 37 206 131 76 21.0 3.10
AA7N 7.00 M30 x 3.50 45 106 54 32 42 222 165 95 35.0 6.30
AA11N 11.00 M36 x 4.00 57 166 71 44 64 317 217 124 55.0 15.50
AA12.5N 12.50 M42 x 4.50 57 160 71 44 82 317 217 124 62.5 16.00
AA13.5N 13.50 M48 x 5.00 57 154 71 44 82 317 217 124 67.5 16.80
AA22.3N 22.30 M64 x 6.00 76 204 103 57 101 428 296 165 111.5 39.00
AA31.5N 31.50 M72 x 6.00 95 220 133 70 132 495 359 206 157.5 74.00
AA51N 44.60 M90 x 6.00 102 235 153 83 177 561 404 218 255.0 118.00
23
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
CPE ■
Fishing single hook
t mm A B C D P t Kg
CPE 5/6 1.12 5/6 131 30 11 29 28 4.5 0.50
CPE 7/8 2.00 7/8 159 32 12 31 29 8.0 0.95
CPE 10 3.15 10 184 37 14 36 31 12.6 1.65
of
Waterpro
CPE 13 5.30 13 230 48 16 46 40 21.2 2.90
CPE 16 8.00 16 268 57 21 54 47 32.0 4.50
XLP ■
Fishing self locking hook
This swivel hook with ball bearings is waterproof and can rotate under load.
t mm A B C D P t Kg
XLP 5/6 1.12 5/6 121 30 11 29 32 4.5 0.60
XLP 7/8 2.00 7/8 147 32 12 31 44 8.0 1.20
XLP 10 3.15 10 177 37 14 36 49 12.6 2.24
of
Waterpro
XLP 13 5.30 13 211 48 16 46 64 21.2 4.20
XLP 16 8.00 16 254 57 21 54 78 32.0 7.80
24
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
XLB ■
Swivel clevis self locking hook
The clevis enables a direct connection to grade 8 chains (code C) and the ball bearing swivel
enables easy rotation under load.
t mm A B C D P t Kg
of
Waterpro
XLB 0 1.12 5/6* 130 16 24 34 32 4.5 0.67
XLB 1 2.00 7/8 191 23 29 40 44 8.0 1.30
XLB 2 3.15 10 231 30 34 47 49 12.6 2.45
XLB 3 5.30 13 285 35 43 60 64 21.2 4.40
XLB 4 8.00 16 339 39 57 72 78 32.0 8.00
ELD ■
Ball bearing swivel Eye/Eye
This swivel has two needle roller thrust bearings in the swivel as a standard.
This feature enables smooth, easy rotation under load.
t A B ØC t Kg
ELD 0 1.12 118 30 11 4.5 0.29
ELD 1 2.00 126 32 12 8.0 0.56
ELD 2 3.15 155 37 14 12.6 0.92
ELD 3 5.30 195 48 16 21.2 1.67
ELD 4 8.00 229 58 21 32.0 2.73
ELD 5 12.50 266 73 24 50.0 4.59
ELD 6 15.00 330 82 25 60.0 7.65
EBC ■
Ball bearing swivel Eye/Clevis
t mm A B C t Kg
EBC 6 1.12 6 74 30 11 4.5 0.29
of
Waterpro
EBC 7/8 2.00 7/8 84 32 12 8.0 0.55
EBC 10 3.15 10 104 37 14 12.6 0.90
EBC 13 5.30 13 129 48 16 21.2 2.30
EBC 16 8.00 16 150 57 21 32.0 3.98
25
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
EC ■
Ball bearing swivel Clevis/Clevis
t mm A B C t Kg
EC 6 1.12 6 52 34 7 4.5 0.27
EC 8 2.00 8 81 40 9 8.0 0.62
of
Waterpro
EC 10 3.15 10 90 49 11 12.6 1.10
EC 13 5.30 13 129 60 14 21.2 2.30
EC 16 8.00 16 141 80 19 32.0 4.30
OLEC ■
Ball bearing swivel small Eye/Clevis
Assembly with an omega link (code CO), pear shape link (code MP) or clevis hooks
(XLC-GKC-CSC).
t mm A B C D t Kg
of
Waterpro
OLEC 6 1.12 6 56 34 8 6 4.5 0.24
OLEC 8 2.00 8 68 40 9 10 8.0 0.50
OLEC 10 3.15 10 79 49 13 12 12.6 0.90
OLEC 13 5.30 13 109 60 16 13 21.2 1.80
OLEC 16 8.00 16 129 80 20 15 32.0 3.60
ALEC ■
Ball bearing swivel Eye/Clevis
26
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
GH ■
Excavator hook
These hooks are welded directly to the booms of bucket or crane loaders.
(Welding instructions are supplied with each hook).
Note: Lifting with the teeth of an excavator is forbidden.
Latches are fitted as standard, to prevent accidental unhooking.
t A B P t Kg
GH 0.75 0.75 56 70 22 3.0 0.23
GH 1 1.00 71 78 25 4.0 0.48
GH 2 2.00 91 81 36 8.0 0.72
GH 3 3.00 104 104 39 12.0 1.07
GH 4 4.00 120 129 42 16.0 1.59
GH 5 5.00 136 146 47 20.0 2.32
GH 8 8.00 145 146 52 32.0 3.27
GH 10 10.00 178 193 77 40.0 6.07
GH 15 15.00 185 225 76 60.0 9.00
CFO ■
Eye foundry hook
The throats are designed to accommodate standard trunions, whereas the tips enable easy
insertion into the holes of castings. These hooks must be used for specific applications as they
do not have safety latches.
t mm A B C D P t Kg
CFO 6 1.12 6 93 17 21 19 48 4.5 0.33
CFO 7/8 2.00 7/8 124 22 28 25 63 8.0 0.76
CFO 10 3.15 10 157 28 36 34 80 12.6 1.47
CFO 13 5.30 13 190 36 46 44 96 21.2 3.00
CFO 16* 8.00 16 205 45 48 32 102 32.0 5.60
CFO 18/20* 12.50 18/20 235 51 54 40 114 50.0 10.40
CFO 22* 15.00 22 265 65 70 47 127 60.0 13.60
CFO 26* 21.20 26 305 72 80 52 136 84.8 20.00
CFO 32* 31.50 32 327 83 93 60 152 126.0 25.00
27
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 8
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
CST ■
Web sling hook
These hooks are designed to be sewn into webbing slings. Fitted with forged latches for
greater safety
t A B C D P t Kg
CST 75 3.00 132 79 40 75 36 12.0 2.63
XLS ■
Webbing self locking hook
This self locking hook is adapted to flat webbings and enables an easy assembly with its
removable pin.
t A B C D E P t Kg
XLS 50 3.15 160 32 37 52 18 49 12.6 1.70
COS ■
Web sling connector
This web link is suitable with an omega link (code CO) for connecting round or flat webbing
slings to master links (code MS or MTS). Direct connection to clevis hooks is also possible.
Sold disassembled.
28
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
MJS ■
Webbing connecting link
This webbing connecting link is suitable for connecting flat webbing slings to master links
(code MS or MTS).
t mm A B C D E t Kg
MJS 7/8 2.00 7/8 72 14 41 66 20 8.0 0.31
MJS 10 3.15 10 89 15 46 75 25 12.6 0.54
MJS 13 5.30 13 113 19 52 87 30 21.2 1.09
29
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 6
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
Shackles are available in two types: anchor (bow type) and chain (dee type). Both are available with either screw pins
or safety nut & bolt type pins. Shackle bodies and pins are heat treated and tempered for added strength and to
maintain the ductility standards required by Federal specifications RR-C-271d. Shackles should never be pulled at
angles, as the capacity can be dramatically reduced.
Safety type shackles have a threaded bolt a nut and a locking split pin. The split pin eliminates the possibility of the
nut working loose. You must not replace the originally bolt & nut with a commercial nut & bolt, as the load lifting
capacity may be jeopardised. Never use a safety shackle without the split pin. Safety shackles are mainly used for
more permanent applications.
MDV
Screw pin dee chain shackle
t A F inch F mm B C t Kg
MDV 0.33 0.33 27 3/16” 5 6 9.5 2.0 0.01
MDV 0.5 0.50 22 1/4” 6 8 12 3.0 0.05
MDV 0.75 0.75 26 5/16” 8 10 13.5 4.5 0.08
MDV 1 1.00 32 3/8” 10 11 17 6.0 0.13
MDV 1.5 1.50 37 7/16” 11 13 19 9.0 0.20
MDV 2 2.00 41 1/2” 13 16 20 12.0 0.27
MDV 3.25 3.25 51 5/8” 16 19 27 19.0 0.57
MDV 4.75 4.75 60 3/4” 19 22 32 28.5 1.19
MDV 6.5 6.50 71 7/8” 22 25 36 39.0 1.43
MDV 8.5 8.50 81 1” 25 28 43 51.0 2.16
MDV 9.5 9.50 90 1”1/8 28 32 46 57.0 3.06
MDV 12 12.00 100 1”1/4 32 35 51 72.0 4.11
MDV 13.5 13.50 111 1”3/8 35 38 57 81.0 5.28
MDV 17 17.00 122 1”1/2 38 42 60 102.0 7.24
MDV 25 25.00 146 1”3/4 45 50 73 150.0 12.14
MLV
Screw type anchor shackle
Screw pin bow type anchor shackles feature an open throat design that permits free line
movement without undue wear. The wide bow allows ample clearance for thimbles and
turnbuckles.
t A F inch F mm B C D t Kg
MLV 0.33 0.33 22 3/16” 5 6 9.5 15 2.0 0.03
MLV 0.5 0.50 29 1/4” 6 8 12 20 3.0 0.05
MLV 0.75 0.75 31 5/16” 8 10 13.5 21 4.5 0.09
MLV 1 1.00 37 3/8” 10 11 17 26 6.0 0.14
MLV 1.5 1.50 43 7/16” 11 13 19 29 9.0 0.17
MLV 2 2.00 48 1/2” 13 16 20 33 12.0 0.33
MLV 3.25 3.25 60 5/8” 16 19 27 43 19.0 0.62
MLV 4.75 4.75 71 3/4” 19 22 32 50 28.5 1.07
MLV 6.5 6.50 84 7/8” 22 25 36 58 39.0 1.64
MLV 8.5 8.50 95 1” 25 28 43 68 51.0 2.28
MLV 9.5 9.50 108 1”1/8 28 32 46 74 57.0 3.36
MLV 12 12.00 119 1”1/4 32 35 51 82 72.0 4.31
MLV 13.5 13.50 133 1”3/8 35 38 57 92 81.0 6.14
MLV 17 17.00 146 1”1/2 38 42 60 98 102.0 7.81
MLV 25 25.00 177 1”3/4 45 50 73 127 150.0 12.61
30
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 6
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
MDB
Safety nut & bolt dee shackle
Safety dee type chain shackles are mainly used in one leg slings.
t A F inch F mm B C t Kg
MDB 1 1.00 32 3/8” 10 12 17 6.0 0.15
MDB 1.5 1.50 37 7/16” 11 14 18 9.0 0.20
MDB 2 2.00 41 1/2” 13 16 20 12.0 0.34
MDB 3.25 3.25 51 5/8” 16 19 27 19.0 0.67
MDB 4.75 4.75 60 3/4” 19 22 32 28.5 1.14
MDB 6.5 6.50 71 7/8” 22 25 36 39.0 1.75
MDB 8.5 8.50 81 1” 25 28 43 51.0 2.52
MDB 9.5 9.50 90 1”1/8 28 32 46 57.0 3.45
MDB 12 12.00 100 1”1/4 32 35 51 72.0 4.91
MDB 13.5 13.50 111 1”3/8 35 38 57 81.0 6.24
MDB 17 17.00 122 1”1/2 38 42 60 102.0 8.40
MDB 25 25.00 146 1”3/4 45 50 73 150.0 14.26
MLB
Safety bow anchor shackle
Safety bow type anchor shackles feature an open throat design that permits free line
movement without undue wear. The wide bow allows ample clearance for thimbles and
turnbuckles. Safety bow shackles are mainly used for multi leg slings.
t A F inch F mm B C D t Kg
MLB 2 2.00 48 1/2” 13 16 20 33 12.0 0.36
MLB 3.25 3.25 60 5/8” 16 19 27 43 19.0 0.76
MLB 4.75 4.75 71 3/4” 19 22 32 50 28.5 1.23
MLB 6.5 6.50 84 7/8” 22 25 36 58 39.5 1.79
MLB 8.5 8.50 95 1” 25 28 43 68 51.0 2.57
MLB 9.5 9.50 108 1”1/8 28 32 46 74 57.0 3.75
MLB 12 12.00 119 1”1/4 32 35 51 82 72.0 5.32
MLB 13.5 13.50 133 1”3/8 35 38 57 92 81.0 7.19
MLB 17 17.00 146 1”1/2 38 42 60 98 102.0 9.44
MLB 25 25.00 177 1”3/4 45 50 73 127 150.0 15.40
31
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
TAG ■ ■
Identification tag Grade 8/10
These aluminium tags have the advantage that they can be fixed on most types of machinery
& slings. We can pre-stamp them according to your needs and norms, to identify chain, wire
rope & webbing slings.
A B C* Kg
TAG 51 76 220 0.07
VR
Replacement kit for self locking hooks
VR kits are packed in individual plastic bags that contain one release lever, one spring and one
pin. These kits can be used for the XL and GK ranges according to following table. A small plastic
tube has to be used as a «leader pin» to help locate the kit, before pressing in the main roll pin.
RCOS
Replacement kit for webbing connector
COS Kg
RCOS 7/8 COS 60 0.03
RCOS 10 COS 90 0.08
RCOS 13 COS 150 0.15
RCOS 16 COS 240 0.25
32
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
AC
Spare kit for clevis fittings
AC kits are packed in individual plastic bags that contain one load pin and 2 retaining pins.
These kits can be fitted to all Excel clevis components, excepted for the COS.
RMJ
Spare kit for MJ/MJS
RMJ kits are packed in individual plastic bags that contain one spring and one load pin.
RMJ 6 MJ 6 0.01
RMJ 7/8 MJ 7/8 - MJS 7/8 0.01
RMJ 10 MJ 10 - MJS 10 0.02
RMJ 13 MJ 13 - MJS 13 0.05
RMJ 16 MJ 16 0.10
RMJ 18/20 MJ 18/20 0.15
RMJ 22 MJ 22 0.38
RMJ 26 MJ 26 0.63
RMJ 32 MJ 32 1.00
LF ■ ■
Forged latch
LF kits are packed in individual plastic bags that contain one forged latch, one spring and
one retaining pin. These latches are a standard, and can be fitted to all Excel products utilising
safety latches.
33
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
VCR
Spare kit for shortener hook XLR
REG
Load indicator
This load indicator made in plastic (recto- Grade 8 and verso Grade 10 ) assists with sling
concepts and calculations and can be used on the building sites.
Dimensions: 80 mm x 150 mm.
34
Conception
Die
Stock
Forge
Machining Control
35
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Chain Ø
2 leg sling 3 or 4 leg sling
Endless sling
1 leg sling 0°<ß≤ 30° 30°<ß≤ 45° 45°<ß≤ 60° 0°<ß≤ 30° 30°<ß≤ 45° 45°<ß≤ 60°
0°<α≤ 60° 60°<α≤ 90° 90°<α≤ 120° 0°<α≤ 60° 60°<α≤ 90° 90°<α≤ 120°
Safety Factor 1.73 Safety Factor 1.4 Safety Factor 1.0 Safety Factor 2.6 Safety Factor 2.1 Safety Factor 1.5 Safety Factor 1.6
mm t t t t t t t t
6 1.40 2.40 1.95 1.40 3.65 2.95 2.10 2.24
8 2.50 4.35 3.55 2.50 6.50 5.30 3.75 4.00
10 4.00 6.90 5.65 4.00 10.40 8.50 6.00 6.40
13 6.70 11.60 9.45 6.70 17.40 14.00 10.00 10.70
16 10.00 17.30 14.10 10.00 26.00 21.20 15.00 16.00
Grade 10
Grade 10 = 25% greater lifting capacity
Through our constant product research and manufacturing improvements, we have been able to develop new fittings with much higher strength and
performance factors.
36
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 10
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
These welded master links are designed for 1 or 2 leg slings. The master link assemblies (code UMTS) have a flat in
order to make assembly with omega links (code UCO) easier.
UMS ■
Welded master link
2 legs ß
1 leg A B ØC t t Kg
30˚ 45˚ 60˚
UMS 13 6 - 6 6 100 60 13 2.00 8.0 0.30
UMS 16 8 6 - 8 120 70 16 3.15 12.6 0.60
UMS 18 10 8 8 10 135 75 18 5.30 21.2 0.80
UMS 22 13 10 10 13 170 90 22 8.00 32.0 1.50
UMS 25 16 - 13 16 190 105 25 11.20 44.8 2.20
UMS 30 18/20 - 16 18/20 235 125 30 16.00 64.0 3.90
V CE 13 CC Z
UMTS ■
Master link assembly
Chain Ø
Code Dimensions in mm WLL BF Weight
ß
30˚ 45˚ 60˚ A B ØC a b Ø t t Kg
UMTS 18 - 6 6 135 75 18 100 60 16 3.5 14.0 1.80
UMTS 22 8 8 8/10 170 90 22 120 70 18 6.5 26.0 3.10
UMTS 28 10 10 13 210 115 28 120 70 20 11.0 44.0 4.90
UMTS 36 13 13 16 270 150 36 135 75 25 17.5 70.0 10.00
UMTS 38 - 16 18/19 290 160 38 170 95 30 21.2 84.8 13.90
37
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 10
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
UCO ■
Omega link
It is an easy and safe connection between the chain and the components.
t mm A B C t Kg
UCO 6 1.40 6 25 20 9 5.6 0.07
UCO 7/8 2.50 7/8 34 23 16 10.0 0.16
UCO 10 4.00 10 41 31 17 16.0 0.28
UCO 13 6.70 13 54 40 21 26.8 0.63
UCO 16 10.00 16 64 48 26 40.0 1.13
UC ■
Lifting Chain
UMP ■
Pear shape link
The pear shape link is designed for use in one leg slings. The clevis eliminates the need for a
connecting link.
t mm A B C t Kg
UMP 5/6 1.40 5/6 82 33 64 5.6 0.13
UMP 7/8 2.50 7/8 90 41 70 10.0 0.27
UMP 10 4.00 10 110 50 87 16.0 0.61
UMP 13 6.70 13 147 66 116 26.8 1.38
UMP 16 10.00 16 185 84 148 40.0 2.71
38
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 10
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
UXLE ■
Swivel self locking hook
There is a flat on the eyes that enables assembly with omega links (code UCO). All of these
hooks have a needle roller thrust bearing in the swivel as a standard. This feature enables
smooth, easy rotation under load.
t mm A B C D E P t Kg
UXLE 0 1.40 5/6 122 16 26 30 34 32 5.6 0.73
UXLE 1 2.50 7/8 148 24 31 32 40 44 10.0 1.35
UXLE 2 4.00 10 183 32 37 37 49 49 16.0 2.45
UXLE 3 6.70 13 214 37 47 48 61 64 26.8 4.38
UXLE 4 10.00 16 268 39 57 58 59 78 40.0 7.86
UXLC ■
Clevis self locking hook
t mm A B C D P t Kg
UXLC 0 1.40 5/6 92 16 26 28 32 5.6 0.47
UXLC 1 2.50 7/8 111 24 31 32 44 10.0 0.90
UXLC 2 4.00 10 141 32 37 41 49 16.0 1.72
UXLC 3 6.70 13 167 37 47 53 64 26.8 3.21
UXLC 4 10.00 16 205 39 57 64 78 40.0 5.93
UELD ■
Ball bearing Swivel Eye/Eye
These swivels have two needle bearings in the swivel as a standard. This feature enables
smooth, easy rotation under load.
t A B ØC t Kg
UELD 0 1.40 118 30 11 5.6 0.29
UELD 1 2.50 126 32 12 10.0 0.56
UELD 2 4.00 155 37 14 16.0 0.92
UELD 3 6.70 195 48 16 26.8 1.67
UELD 4 10.00 229 58 21 40.0 2.73
UELD 5 15.60 266 73 24 62.4 4.59
UELD 6 18.70 330 82 25 74.8 7.65
39
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 10
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
UCSC ■
Clevis sling hook
Thanks to its unique design, the single hook has incomparable qualities. Its forged latch is
fitted with a s/s spring and a high resistance pin which corresponds to the current norms.
The clevis type enables a direct connection to grade 10 chains (code UC).
t mm A B P t Kg
UCSC 6 1.40 6 73 16 28 5.6 0.26
UCSC 7/8 2.50 7/8 95 20 29 10.0 0.49
UCSC 10 4.00 10 110 24 31 16.0 0.94
UCSC 13 6.70 13 138 32 40 26.8 1.80
UCSC 16 10.00 16 162 40 47 40.0 3.00
UCFO ■
Eye foundry hook
The throats are designed to accommodate standard trunions, whereas the tips enable easy
insertion into the holes of castings. These hooks must be used for specific applications as they
do not have safety latches.
t mm A B C D P t Kg
UCFO 6 1.40 6 93 17 21 19 48 5.6 0.33
UCFO 7/8 2.50 7/8 124 22 28 25 63 10.0 0.76
UCFO 10 4.00 10 157 28 36 34 80 16.0 1.47
UCFO 13 6.70 13 190 36 46 44 96 26.4 3.00
UGC-UGCV ■
Shortening clutch
Shortening clutches are an essential part of chain slings, used to shorten the lengths of the
chain legs and prevent instability of the loads. Shortening clutches are also available with a
locking system, designed to prevent accidental disengagement of the chain.
40
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Grade 10
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
UXLR ■
Shortening self locking hook
The combination hook-shortener gives a better productivity with a quick shortening action at
the bottom of the sling.
t mm A B C D E P t Kg
UXLR 7/8 2.50 7/8 173 24 31 51 153 44 10.0 1.10
UXLR 10 4.00 10 218 32 37 64 192 49 16.0 2.29
UXLR 13 6.70 13 267 37 47 83 235 64 26.8 4.20
Necwept
Con
41
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Lashing
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
S ■
S Hook
t A B D t Kg
S 10 0.20 80 30 10 0.8 0.12
S 13 0.30 100 40 13 1.2 0.21
S 16 0.50 130 50 16 2.0 0.53
S 18 0.75 160 60 18 3.0 0.81
S 20 1.00 180 65 20 4.0 1.10
S 22 1.20 200 70 22 4.8 1.46
S 24 1.50 220 80 24 6.0 2.10
S 32 2.00 260 90 32 8.0 3.95
S 36 3.00 320 100 36 12.0 5.70
S 40 4.00 360 115 40 16.0 8.00
S 45 5.00 400 130 45 20.0 11.48
S 51* 6.00 450 150 51 24.0 16.20
* Unpainted.
Safety factor 4.
SO ■
S Eye Hook
t A B C D t Kg
SO 10 0.20 80 30 16 10 0.8 0.10
SO 13 0.30 100 40 21 13 1.2 0.20
SO 16 0.50 130 50 25 16 2.0 0.50
SO 18 0.75 160 60 34 18 3.0 0.70
SO 20 1.00 180 65 44 20 4.0 1.00
SO 22 1.20 200 70 40 22 4.8 1.40
SO 24 1.50 220 80 40 24 6.0 1.60
SO 32 2.00 260 90 50 32 8.0 3.10
SO 36 3.00 320 100 52 36 12.0 4.80
SO 40 4.00 360 115 59 40 16.0 7.20
SO 45 5.00 400 130 68 45 20.0 9.60
SO 51* 6.00 450 150 77 51 24.0 13.80
* Unpainted.
Safety factor 4.
42
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Lashing
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
PAS ■
Weld-on transport ring
The base is forged from St 52-3 steel and the ring in 23MN.
Welding must only be carried out by a qualified welder in accordance with DIN 8563 resp.
15429. Without spring. The surfaces to be welded must be clean, without oil, grease or paint...
Welding instructions are supplied with each delivery.
t A B C D t Kg
PAS 1 1.20 42 40 13 35 4.8 0.40
PAS 3 3.20 48 45 18 42 12.8 0.70
PAS 5 5.30 57 55 22 49 21.2 1.20
PAS 8 8.00 67 70 26 64 32.0 2.40
PAS 15 15.00 93 97 34 86 60.0 5.90
Safety factor 4.
CAC ■
Clevis lashing hook
t A C D F H t Kg
CAC 6/8 1.50 23 55 10 106 66 6.0 0.28
CAC 10 3.10 29 76 13 132 82 12.4 0.57
CAC 13 5.30 43 102 16 177 106 21.2 1.60
CAC 16 8.00 48 118 19 210 128 32.0 2.60
CAC 22 15.00 65 155 25 294 176 60.0 6.20
TAC ■
Loadbinder
E1 open - E closed
F1 open - F closed
Chain
Code Length Dimensions in mm LC BF Weight
Ø
A B C E E1 F F1 G t t Kg
TAC 6 6 182 22 45 412 540 452 580 8.9 2.00 4.1 1.60
TAC 8 8 354 33 66 575 778 641 844 13.0 4.30 8.6 4.77
TAC 10 10 354 33 66 613 816 687 890 15.0 7.30 14.6 5.86
TAC 13 13 354 33 66 672 875 764 967 18.8 10.35 20.7 9.54
43
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
44
Tel. +33(0)4 73 51 89 51
Tel. +33(0)4 73 51 56 13
Tel. +33(0)4 73 51 56 14
Fax. +33(0)4 73 51 56 15
e-mail: contact@excellifting.fr
Operating instructions to be given to the end user of the sling with the corresponding
certificate of conformity according to the directive 98/37 of the CEE.
General
- Consult a competent and experienced person in order to choose the correct components for the sling.
- Refer to the load table to make your sling.
Marking
The markings on Excel components correspond to the manufacturers’ symbols, CE mark, corresponding chain diameter, grade and batch code.
Use
- Sling cannot be used in some dangerous or bad environmental situations.
- Take up the weight of the load, checking its centre of gravity, its fixation points and method of lifting. Consider the sling angle in order not to
exceed the loading capacity (consult the load table).
- Do not use in acid conditions and avoid shocks. Any heat or surface treatment is strictly prohibited. If in doubt consult the manufacturer.
- Use between – 40 °C and 400 °C (grade 8).
- Decrease of the WLL according to the temperature.
- Do not twist or load a sling that has any knots.
- When the load is ready, ensure that all legs are carrying the load and that the chain is taut. Lift the load slowly and check that it is
attached correctly.
- Before lowering the load, check that the ground can support it, there are no obstructions or people nearby.
- If less legs than the number in the sling are to be used, reduce the WLL according to the load table and connect the unused hook to the
master link to prevent swaying.
- Only issue a sling to competent person.
45
FORGES DE L’ÉMINÉE
Route de Chanier - 63250 CELLES-SUR-DUROLLE
FRANCE
E-mail: contact@excellifting.fr
Member of Van Beest International WEB: www.excellifting.com
The indications given in this catalog can be modified without notice and are given for information. EXCEL - Edition 2008