This document shows a diagram of a beam-bracing connection. The connection uses a rectangular beam that is 200mm wide and 412.8mm deep. It is connected to a bracing member via two bolted connections on either side, with the bolts placed 100mm in from the edges of the beam and 50mm from the top and bottom. Additional details include all dimensions are in millimeters and the bolt used is an M20.
This document shows a diagram of a beam-bracing connection. The connection uses a rectangular beam that is 200mm wide and 412.8mm deep. It is connected to a bracing member via two bolted connections on either side, with the bolts placed 100mm in from the edges of the beam and 50mm from the top and bottom. Additional details include all dimensions are in millimeters and the bolt used is an M20.
This document shows a diagram of a beam-bracing connection. The connection uses a rectangular beam that is 200mm wide and 412.8mm deep. It is connected to a bracing member via two bolted connections on either side, with the bolts placed 100mm in from the edges of the beam and 50mm from the top and bottom. Additional details include all dimensions are in millimeters and the bolt used is an M20.