Professional Documents
Culture Documents
2018
VARIABLE
DISPLACEMENT
AXIAL PISTON
Headquarters:
CASAPPA S.p.A. PUMPS
Via Balestrieri, 1
43044 Lemignano di Collecchio
Parma (Italy)
Tel. (+39) 0521 30 41 11
Fax (+39) 0521 80 46 00
For truck
IP Videoconferencing
E-mail: info@casappa.com applications
www.casappa.com
TVP
FEATURES
Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications.
The compact design allows to be mounted directly on the PTOs.
DISPLACEMENTS zz
Pump internal drain
Up to 84,7 cm3/rev (5.17 in3/rev)
zz
Compensators external drain line
PRESSURE zz
Direct mounting on the PTOs
Max. continuous 350 bar (5075 psi) zz
Body width 124 mm (4.8819 in)
Max. peak 400 bar (5800 psi)
zz
Max. and min. displacement limiter
SPEED zz
Flow and pressure compensator
Max. 2500 min-1 zz
Compact design
zz
Low noise emission
SECTOR
Truck applications FILTRATION
To ensure the optimal performance and the maximum life to
DIRECTION OF ROTATION the pump, the hydraulic fluid must have and maintain a con-
Clockwise or anti-clockwise defined looking at the drive shaft. tamination level within the values shown in the table below.
HYDRAULIC FLUID Working pressure Δp < 140 140 < Δp < 210 Δp > 210
Mineral oil based hydraulic fluid conforming to DIN 51524. bar (psi) (2030) (2030) (3045) (3045)
Contamination
9 8 7
FLUID VISCOSITY class NAS 1638
The fluid viscosity range for optimal use of TVP pump is be- Contamintion class
20/18/15 19/17/14 18/16/13
tween 15 and 35 cSt (77 and 163 SSU). ISO 4406:1999
Functional limit conditions are: Achieved with filter
max.: 1500 cSt (6819 SSU) at start up at -25 °C (-13 °F) with ßx(c) ≥75 according 10 μm 10 μm 10 μm
straight and short inlet line. to ISO 16889
min.: 10 cSt (46 SSU) at maximum temperature of 110 °C
(230 °F) FILL WITH OIL BEFORE START-UP
Pump type TVP 60·84
Max. displacement (theor.) Vmax cm3/rev (in3/rev) 84,7 (5.17)
bar abs. (psi) min. 0,8 (12)
Inlet pressure
bar abs. (psi) max. 2 (29)
continuous 350 (5075)
Max. outlet pressure pmax bar (psi)
peak 400 (5800)
Compensator max. drain line pressure bar abs. (psi) 1,5 (22)
Max. speed nmax min-1 @ Vmax (1) 2300
@ nmax 211,8 (55.96)
Max. delivery (theor.) l/min (US gpm) @ 2000 min-1 169,4 (44.76)
@ 1500 min-1 127,1 (33.58)
PORTS POSITION
Anti-clockwise rotation O
Clockwise rotation O
DISPLACEMENT SETTING
O
Max. displacement limiter
TVP 60·84
cm /rev
3 from 55 (3.36)
Max. displacement setting range (in3/rev) to 84,7 (5.17)
cm /rev
3 from 0
Min. displacement setting range (in3/rev) to 38,1 (2.32)
One turn of screw changes pump cm /rev
3 E 5,0 (0.31)
displacement by approximately (in3/rev) F 4,2 (0.26)
DCAT054-ID02 3
TVP
Replaces: 01/09.2018
O
Y
w w
Center of gravity
Not included
in supply
OO02/02.2019
4 DCAT054-ID02
TVP
PORT SIZES
O
DRAIN LOAD SENSING
INLET / OUTLET PORTS
PORTS PORTS
Split Split SAE SAE Gas SAE
Ports type SSM SSS ODT ODT BSPP (l) ODT
Replaces: 01/09.2018
(l) Standard.
SAE FLANGED PORTS J518 - Standard pressure series 3000 psi SSM
Metric thread ISO 60° conforms to ISO/R 262
A B C D
Nominal
CODE
size mm mm mm Thread Nm Nm
(in) (in) (in) Depth mm (in) (lbf in) (lbf in)
25,4 52,4 26,2 M 10 30 +2,5
MC 1”
(1.00) (2.06) (1.03) 17 (0.6693)
—
(266 ÷ 288)
51 77,8 42,9 M 12 30 +2,5
MF 2”
(2.01) (3.06) (1.69) 20 (0.7874) (266 ÷ 288)
—
SAE FLANGED PORTS J518 - Standard pressure series 3000 psi SSS
American straight thread UNC-UNF 60° conforms to ANSI B 1.1
OO02/02.2019
A B C D
Nominal
CODE
size mm mm mm Thread Nm Nm
(in) (in) (in) Depth mm (in) (lbf in) (lbf in)
25,4 52,4 26,2 3/8 - 16 UNC-2B 30 +2,5
SC 1”
(1.00) (2.06) (1.03) 17 (0.6693)
—
(266 ÷ 288)
51 77,8 42,9 1/2 - 13 UNC-2B 30 +2,5
SF 2”
(2.01) (3.06) (1.69) 20 (0.7874) (266 ÷ 288)
—
DCAT054-ID02 5
TVP
PORTS SIZES
Replaces: 01/09.2018
Tightening torque for high pressure port
A ØB ØC D E
Nominal
CODE
size mm mm mm mm mm Nm Nm
O (in) (in) (in) (in) (in) (lbf in) (lbf in)
9,5 12 +1
03 1/4” 7/16” - 20 UNF - 2B —
(0.38)
— — —
(106 ÷ 115)
33 17 1 20 +1
OB 1/2” 3/4” - 16 UNF - 2B
(1.30) (1.38)
—
(0.03) (177 ÷ 186)
—
35 20,5 2 30 +2,5
OC 5/8” 7/8” - 20 UNF - 2B
(1.38) (0.80)
—
(0.08) (266 ÷ 288)
—
OO02/02.2019
A ØB ØC D E
Nominal
CODE
size mm mm mm mm mm Nm Nm
(in) (in) (in) (in) (in) (lbf in) (lbf in)
8,75 12 5 +0,25
GA 1/8” G 1/8 —
(0.34) (0.48)
— —
(44 ÷ 46)
6 DCAT054-ID02
TVP 02 T A Edition: 02/02.2019 Replaces: 01/09.2018
VARIABLE
DISPLACEMENT
AXIAL PISTON
Headquarters:
CASAPPA S.p.A. PUMPS
Via Balestrieri, 1
43044 Lemignano di Collecchio
Parma (Italy)
Tel. (+39) 0521 30 41 11
Fax (+39) 0521 80 46 00
For truck
IP Videoconferencing
E-mail: info@casappa.com applications
www.casappa.com