Professional Documents
Culture Documents
(VISTAS), CHENNAI.
DEPARTMENT OF NAVAL ARCHITECTURE AND OFFSHORE ENGINEERING
UNIVERSITY MODEL EXAMINATIONS – APRIL 2020
Subject Code: 18DNO028 Duration: 2 Hrs.
Subject Name: Basic Ship Theory Max. Marks: 60
PART – A: ( 6 X 2 = 12)
1. What is Offset Table?
2. Write in short about IL & IT
3. Draw a pressure distribution diagram of a submerged body. What is Bilge eductors?
4. State and derive the relationship between CB, CP & CM
5. Write short notes on floodable length.
6. What is Margin line?
PART – B (3 X 16 = 48)
7. Explain how faring of lines plan done. how a set of offsets is lifted from a lines plan?
(OR)
The Half ordinates(m) of a water plane, which are 6m apart are given by 11.16, 24.84,
39.42, 47.52, 40.23, 26.46, 13.23. Calculate and compare the areas of water plane as given
by 1-4-1 rule, 1-3-3-1 rule and trapezoidal rule.
9. L=75m
Semi ordinates at load water plane commencing from forward 0, 1, 2, 4, 5, 5, 5, 4, 3, 2, 0
(m) The spacing between first three semi ordinates & last three semi ordinates are half of
that between other semi-ordinates find position of center of floatation relative to amidships.
(OR)
The following data are available from the hydrostatic curves of a vessel.