Professional Documents
Culture Documents
21
9
FLOWFRESH
⊲ HACCP International certified antimicrobial cementitious polyurethane
floor coating systems, ideal for use in areas where hygiene is critical.
www.flowcreteasia.com
Flowfresh Range Technical Profile
Silver is a natural element known for its ability to purify and protect
from bacterial infections – and provides an attractive, environmentally
friendly alternative to chemically manufactured antimicrobials.
Application Suitability
Food & Meat Bakeries & Food Preparation Hospitals & Pharmaceutical
Beverage & Fish Confectionery & Kitchens Healthcare Environments
Resistance Chart
DESCRIPTION USES
3-component, polyurethane scratch coat/primer
Flowfresh for concrete and cementitious substrates. Flowfresh For priming concrete and screeds, prior to
Primer Primer will bond to surface dry substrates that have overcoating with the Flowfresh flooring system.
a Relative Humidity up to 95% (to BS 8204).
Flowfresh Coating Satin is a 4-component, solvent Flowfresh Coating Satin is normally used as a
Flowfresh free, coloured polyurethane concrete coating. The topcoat for the Flowfresh SR system but if applied
Coating Satin product contains Polygiene®, an antimicrobial in thin coating layers the product will exhibit a light
additive based on silver ion technology. texture due to the sand included in the product.
Technical Profile
Flowfresh
TEMPERATURE RESISTANCE
SL & MF
SL MF
2mm: From 5°C to 65°C 3mm: From -5°C to 70°C
4mm: From -15°C to 90°C
Self-smoothing polyurethane WATER PERMEABILITY
screeds for use in dry areas subject Karsten Test Nil (Impermeable)
to light-medium traffic. FIRE RESISTANCE
EN 13501-1 BFL - s1
Best suited to packaging areas and processing
zones subject to light-medium foot and wheeled SLIP RESISTANCE
traffic, these trowel applied systems deliver a Method described in Dry >40, Wet depends
seamless, joint-free, smooth matt finish. BS 7976-2 on specification
(typical values for (in accordance with HSE
4-S rubber slider) and UKSRG guidelines)
ABRASION RESISTANCE
Hygienic: Taber Abrader 0.1 g loss per 1000 cycles
Contains Polygiene® - an antimicrobial (1 kg load using CS17 wheels)
For applications falling outside of this temperature range, please contact your local Flowcrete Technical Department.
HACCP International certified and
FLEXURAL STRENGTH
complies with USDA and FDA guidelines.
EN 13892-2 >20 N/mm²
** Cure times at temperatures between 0-30˚C can be achieved by altering the quantity of catalyst used.
Heat Resistant:
TENSILE STRENGTH
Resistant to temperatures
of up to 90°C. BS 6319 (SL) (MF)
>10 N/mm2 7 N/mm2
Chemical Resistant: BOND STRENGTH
Protects against the majority of acids
ASTM D4541 (Pull-Off Test) >1.5 MPa*
used in manufacturing processes.
Abrasion Resistant:
Holds its own against impact, SPEED OF CURE** 10˚C 20˚C 30˚C
traffic and chemical attack. Light Traffic 36 hrs 24 hrs 12 hrs
Colours
Flowfresh SL / MF Flowfresh Primer
Prepared Substrate
Ash Grey Blue *Assumes concrete compressive strength is greater than 25 N/mm2
The applied colours may differ from the examples shown. For a full
colour chart and samples, contact your local Flowcrete office.
Application Suitability
Light - Medium Traffic 2mm
Packaging Areas
Loading Bays
Dispensaries
Packaging Areas
Loading Bays
Dispensaries
WATER PERMEABILITY
Slip-resistant polyurethane screeds Karsten Test Nil (Impermeable)
for use in wet areas subject to high FIRE RESISTANCE
volumes of traffic. EN 13501-1 BFL - s1
For applications falling outside of this temperature range, please contact your local Flowcrete Technical Department.
HACCP International certified and EN 13892-2 >20 N/mm²
complies with USDA and FDA guidelines.
TENSILE STRENGTH
** Cure times at temperatures between 0-30˚C can be achieved by altering the quantity of catalyst used.
Heat Resistant: BS 6319 >10 N/mm²
Resistant to temperatures
of up to 120°C. BOND STRENGTH
ASTM D4541 (Pull-Off Test) >1.5 MPa*
Chemical Resistant:
Protects against the majority of acids
used in manufacturing processes. SPEED OF CURE** 10˚C 20˚C 30˚C
Slip Resistant: Light Traffic 36 hrs 24 hrs 12 hrs
Pewter Grey Blue *Assumes concrete compressive strength is greater than 25 N/mm2
The applied colours may differ from the examples shown. For a full
colour chart and samples, contact your local Flowcrete office.
Technical Profile
Flowfresh SR
TEMPERATURE RESISTANCE
From -15°C to 90°C
ABRASION RESISTANCE
Hygienic: Taber Abrader 0.1 g loss per 1000 cycles
Contains Polygiene® - an antimicrobial (1 kg load using CS17 wheels)
additive that kills up to 99.9% bacteria.
COMPRESSIVE STRENGTH
Accredited: EN 13892-2 >50 N/mm²
HACCP International certified and
complies with USDA and FDA guidelines. FLEXURAL STRENGTH
For applications falling outside of this temperature range, please contact your local Flowcrete Technical Department.
Chemical Resistant: EN 13892-2 >20 N/mm²
** Cure times at temperatures between 0-30˚C can be achieved by altering the quantity of catalyst used.
used in manufacturing processes.
BS 6319 7 N/mm2
Slip Resistant: BOND STRENGTH
Impressive anti slip profile
in dry and wet conditions. ASTM D4541 (Pull-Off Test) >1.5 MPa*
Abrasion Resistant:
Holds its own against impact, SPEED OF CURE** 10˚C 20˚C 30˚C
traffic and chemical attack. Light Traffic 36 hrs 24 hrs 12 hrs
*Additional topcoat is required for Rich Cream and other lighter colours.
The applied colours may differ from the examples shown. For a full colour chart and samples, contact your local Flowcrete office.
Application Suitability
Dry Process (Med/Heavy Traffic)
Packaging Areas
Loading Bays
Dispensaries
Packaging Areas
Loading Bays
Dispensaries
For applications falling outside of this temperature range, please contact your local Flowcrete Technical Department.
FLEXURAL STRENGTH
Decorative: EN 13892-2 >20 N/mm²
Offers an attractive finish to enhance
** Cure times at temperatures between 0-30˚C can be achieved by altering the quantity of catalyst used.
the working environment. TENSILE STRENGTH
Chemical Resistant: BS 6319 >10 N/mm²
Flowfresh Coloured
MF Quartz Scatter Topcoat
The applied colours may differ from the examples shown. For a full
colour chart and samples, contact your local Flowcrete office.
Flowcrete Europe & Middle East (EME)
World leader in seamless resin flooring Bulgaria +359 898 61 58 31 bulgaria@flowcrete.com
Denmark +46 435 40 01 10 denmark@flowcrete.com
solutions and other specialist coatings.
France +33 1 60 61 74 42 france@flowcrete.com
Italy +39 339 4853258 italy@flowcrete.com
Africa Norway +47 6486 0830 norway@flowcrete.com
Poland +48 22 879 8907 poland@flowcrete.com
South Africa +27 31 701 0017 southafrica@flowcrete.com
Romania +40 766 596 991 romania@flowcrete.com
Russia +7 916 931 3513 russia@flowcrete.com
Asia Pacific (APAC) Spain +34 937 07 0872 spain@flowcrete.com
Sweden +46 435 40 01 10 sweden@flowcrete.com
Australia +61 7 3205 7115 australia@flowcrete.com
Turkey +90 212 2946570 turkey@flowcrete.com
Bangladesh +603 6277 9575 bangladesh@flowcrete.com
UAE +971 4 347 0460 uae@flowcrete.com
Hong Kong +852 2795 0478 hongkong@flowcrete.com
UK +44 (0) 1270 753 000 uk@flowcrete.com
Indonesia +62 21 252 3201 indonesia@flowcrete.com
Korea +60 3 6277 9575 korea@flowcrete.com
Malaysia +60 3 6277 9575 asia@flowcrete.com
India
New Zealand +64 7 541 1221 newzealand@flowcrete.com
India +91 44 40176600 india@flowcrete.com
Pakistan +60 3 6277 9575 pakistan@flowcrete.com
Philippines +63 2 834 6506 philippines@flowcrete.com
North America
Singapore +65 6848 7166 singapore@flowcrete.com
Taiwan +60 3 6277 9575 taiwan@flowcrete.com Canada +1 877-210-2444 canada@flowcrete.com
Thailand +66 2539 3424 thailand@flowcrete.com Mexico +55 44 40 94 00 mexico@flowcrete.com
Vietnam +84 28 6287 0846 vietnam@flowcrete.com USA +1 513-943-4225 americas@flowcrete.com
*Whilst every care has been taken to ensure that the information included in this document was accurate at the time of printing, Flowcrete reserves the right to change product specifications at
01-19
any time without prior notice. The photographs and colours reproduced in this publication are within the constraints of the printing process and are not to be used for matching purposes. All
photographs are used for approximate representation only and may not show the actual products on offer. E&OE.
www.flowcreteasia.com