Professional Documents
Culture Documents
BMR-100 Batch-Mixing Trailer: Cementing
BMR-100 Batch-Mixing Trailer: Cementing
HAL18318
Features and Benefits
The BMR-100 batch-mixer trailer was designed to • The batch tanks include large center opening hatches with
incorporate a new emission-certified engine and to include removable lids to allow access to the inside of the tank.
safety and ergonomic features for improved use at the
wellsite. This design can provide the following benefits: • The unit is equipped with an emission-certified engine
that produces lesser quantities of pollution and smoke.
• The engine package is mounted on rubber isolators on
the gooseneck portion of the trailer, resulting in less • The unit includes storage for up to 100 feet of suction
noise and maintenance access to both sides of the engine. hose and/or bulk hose, along with storage capacity for
loose iron and high-pressure rotary hoses.
• Personnel can safely stand and work on top of the
flat-top 50 bbl batch tanks, as well as place sacks or
Specifications
buckets of material.
• Trailer Chassis – 344” long kingpin to center of bogie
• The recirculation/booster pump is hydraulically operated
for better speed control. • Deck Engine Module – Tier II emission certified Cat
3126B engine rated at 300 ohp at 2,4000 rpm
• The eductor hopper and elbow assembly for the blower
hose can remain permanently mounted on top of the tank. • Four hydraulic pumps – Two Eaton ACL054 Series 2
Closed Loop Pump, two RexRoth AA10VG45 Closed
• The trailer includes an arrangement for the bulk blower
Loop Pump
hoses, wherein each elbow assembly can be tied together
in a Y configuration so that a single bulk hose from the • Centifugal Pump Module – 6 x 5 x 11 x 11 with Eaton
bulk truck can feed either batch tank. fixed-displacement piston motor
• Each batch tank includes two clean, in-place spray • Batch-tank Modules – 50 bbl tanks each with four
nozzles to assist in scrubbing and washing the tanks after agitators capable if variable speed control up to 135 rpm.
the job is complete. • Non-Radioactive Densometer – MicroMotion DL200
• The fuel tank is mounted to allow the unit to be refueled mass flowmeter provides density of a fluid as an output
at ground level. parameter
www.halliburton.com