Professional Documents
Culture Documents
Edition 30/08/2016
CS CLEAR
CS CLEAR
Solvent Free, Clear, UV Resistant, Epoxy Flooring System
Product Description CS CLEAR is a 2-component solvent free, clear, UV resistant, epoxy resin
based flooring system for clear & 3D, Metallic, Table Top applications.
Storage Conditions / 12 months from date of production if stored in original, unopened and undamaged
Shelf Life sealed packaging, in dry conditions at temperatures between +5°C and +30°C.
CS CLEAR Page 1 of 5
Mechanical / Physical
Properties
Compressive Strength 55 N/mm2
2
Adhesion >1.5 N/mm
Shore D Hardness 80
CS CLEAR Page 2 of 5
Application Details
Substrate Quality The concrete substrate must be sound and of sufficient compressive
2
Strength (minimum 25 N/mm ) with a minimum pull off strength of
2
1.5 N/mm .
The substrate must be free of all contaminants such as oil, grease,
Coatings and surface treatments etc. If in doubt, apply a test area
first.
Make sure that a continuous pore free coat covers the substrate.
Apply CS CLEAR by brush, roller or trowel.
Cleaning of Tools Clean all tools and application equipment with CHIMIQUE SOL Epoxy
Thinner (ET 901) immediately after use.
CS CLEAR Page 3 of 5
Potlife
Temperatures Time
+25°C ~ 15 minutes
Waiting Time /
Overcoating
Waiting
Substrate temperature Minimum Maximum
+25°C 8 hours -
Curing Details
Applied Product
ready for use
Waiting time
Substrate temperature Minimum Maximum
+25°C 24 hours -
Value Base All Technical data stated in this Technical Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
Health and For information and advice on the safe handling, storage and disposal of chemical
products, users shall refer to the most recent Material Safety Data Sheet
Safety
containing physical, ecological, toxicological and other safety-related data.
CS CLEAR Page 4 of 5
Legal Notes The information, and, in particular, the recommendations relating to the application
and end-use of CHIMIQUE SOL’s products, are given in good faith based on
CHIMIQUE SOL’s current knowledge and experience of the products when properly
stored, handled and applied under normal conditions in accordance with CHIMIQUE
SOL’s recommendations. In practice, the differences in materials, substrates and
actual site conditions are such that no warranty in respect of merchantability or of
fitness for a particular purpose, nor any liability arising out of any legal relationship
whatsoever, can be inferred either from this information, or from any written
recommendations, or from any other advice offered. The user of the product must
test the product’s suitability for the intended application and purpose. CHIMIQUE
SOL reserves the right to change the properties of its products. The proprietary
rights of third parties must be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always refer to the most recent issue
of the local Technical Data Sheet for the product concerned, copies of which will be
supplied on request.
CS CLEAR Page 5 of 5