Professional Documents
Culture Documents
C754 V68 Firmware PDF
C754 V68 Firmware PDF
[Release version]
<C754/C654 MFP firmware>
*This firmware can use for Multi-Language. (Multi-Language firmware is the same as this firmware.)
Model Program Name Current Ver. New Ver. Program File Name Note
bizhub C754/C654 MFP firmware G20-65 G20-68 A2X00Y0-F000-G20-68.exe
2. What changed
2.1. Release of bizhub C754/C654 (Maintenance Release Program Ver.G20-68)
The individual files and the checksum are as follows.
Program Name File Name Checksum Note
MFP Card Version A2X00Y0-F000-G20-68
MFP Controller BOOT Program A2X00Y0-1E00-G00-01 EB40
Linux-based MFP Controller Linux-2.6.26.8-rt16 4EF0
MFP Controller Kernel Program A2XK0Y0-1C00-G00-11 FBC7
MFP Controller Subset A2XK0Y0-1F00-G00-06 9EED
MFP Controller A2X00Y0-0100-G20-68 A2C4
MFP Controller System A2X00Y0-1000-G20-68
MFP Controller Print Controller A2X00Y0-3000-G00-6B
MFP Controller Print Controller Font A2X00Y0-3F00-G00-16
MFP Controller Print Controller Demo Page A2X00Y0-3E00-G00-01
MFP Controller MIO A2XK0Y0-5000-G00-45
MFP Controller PIC A2X00Y0-8200-G00-42
Scanner A2X00Y0-0023-G00-08 24C7
Printer A2X00Y0-0050-G00-25 984B
FAX board controller A22M0Y0-4000-G00-07 1FF8
Operation panel message data A2X00Y0-8100-G00-67 9166
ADF (DF-702) A3CK0Y0-0024-G00-03 B5DC
Finisher (FS-534) A3EP0Y0-0071-G00-10 46BB
Finisher (FS-535) A2Y10Y0-00N1-G00-18 57B6
Finisher (JS-602) ---
RU A2Y10Y0-00R1-G00-04 43C1
ZU A1090Y0-00H1-G01-11 7BCC
SD A3ER0Y0-0071-G00-05 CAE8
COPY PROTECT --- 56AC
Movie Data A2X00Y0-C000-G00-00
Voice Data A2X00Y0-F000-G00-11
Dictionary Data A2X0010-B100-G00-02
Engine Parameter A2X00Y0-0054-G00-00
1/10
Program Release Information
CSES ID-No. DLBT1202573EN00
bizhub C754/C654
MFP firmware Ver.G20-68
Subject: bizhub C754/C654 Mass-Production Program Maintenance Release 2 (Ver.G20-68)(for Web Browser (LK-101v3))
2012/11/26
2.2. Fixed issues
2.2.1. The following issues are solved in this firmware.
1. Debug log file may not be saved even if trouble code appears because MFP reboots to clear trouble before debug log data
is generated.
2. When printing the specific web page on IE9, some images are printed as black.
3. C-E301 occurs if Comm. List screen for “Fax TX/RX, FAX TX, FAX RX” in Job List is touched under the following situation.
- Address Book name is registered by over 12 two-byte characters or over 12 one-byte Katakana.
4. Function Permisson settings for Account Track are returned to default setting if Main power SW is turned off and on.
5. If the custom size original is copied or sacnned with 2-Sided by using auto detect size, the image on back side is cut off.
Administrator Settings > System Settings > Output Settings > Print/Fax Output Settings > Fax >"Batch Print"
Incorrect: "Alle Signale"
Correct: "Stapeldruck"
17. Correct the wrong Germany wordings in the Conflict Error message for Searchable PDF.
2/10
Program Release Information
CSES ID-No. DLBT1202573EN00
bizhub C754/C654
MFP firmware Ver.G20-68
Subject: bizhub C754/C654 Mass-Production Program Maintenance Release 2 (Ver.G20-68)(for Web Browser (LK-101v3))
2012/11/26
18. Correct the following wrong Germany wordings in Web Browser.
Incorrect: Dateiformat
Correct: Dateimenü
Incorrect: Scaneinstellungen
Correct: Einstellungen
19. Correct the following wrong Germany wordings.
3/10
Program Release Information
CSES ID-No. DLBT1202573EN00
bizhub C754/C654
MFP firmware Ver.G20-68
Subject: bizhub C754/C654 Mass-Production Program Maintenance Release 2 (Ver.G20-68)(for Web Browser (LK-101v3))
2012/11/26
32. The specific PCL macro data can not be registered from PSWC.
Caution:
If the following a Macro file is registered by PCL font, the macro file can be registered for PCL font.
- Both the form and the PCL Soft font is included in a Macro file.
33. When printing the specific PS file by direct print, MFP hangs up.
34. The font can not be downloaded from MacOS.
35. Correct the wrong Chinese wordings(20 items).
36. C-FA16 occurs when printing a file created by the special Application for customer.
37. Starry effect may happen on the reverse side of the paper in duplex mode when the 2nd transfer voltage is set to the
“Auto”mode.
38. C-FE03 may occur with ZU-606.
39. Image Log Transfer job is not counted in the Usage Frequency Counter for CSRC. But, it is counted as "Scan" job.
40. If perform scan by RealTimeTWAIN, it is displayed on Active job list as "SCAN" instead of "TWAIN".
41. If 201 or more documents are saved in the Memory RX User Box, MFP hangs up if the document after NO.201 is deleted.
42. If Copy or Scan/Fax or User Box screen is displayed and Fiery icon (Info Icon) is pressed after Keyboard for "PrintMe" of
Fiery is displayed, “Please wait” keeps displaying on Controller Details screen.
43. If Address Book name is registered by over 12 two-byte characters with "-", Address Book name is broken by "-".
44. Frame Erase setting for Program is not reflectded even if Program with Frame Erase setting is selected after Frame Erase
setting is set.
45. The authentication parameter input screen is displayed when login by Enhanced Server authentication using authentication
application.
46. If the following procedure is operated, Fax address or I-Fax address registered by Direct Input is cleared.
1. Open Address Detailes of Fax address or I-Fax address registered by Direct Input and touch "Edit" button.
2. Touch "Cancel" button.
3. Touch "Edit" button again.
47. If the following procedure is operated, Port Number of FTP address registered by Direct Input is returned to default setting
(21).
1. Open Address Detailes of FTP address registered by Direct Input and touch "Address Edit" button.
2. Change Port Number and touch "OK" button.
3. Touch "Address Edit" button again.
48. The following message is changed when the Start key is pressed.
Before change:
"Job is being canceled."
After change:
"The job is being stopped"
49. When the PCL macro is used and performing the composite, the blank page is printed out.
50. If the main power switch have never been turned OFF and ON, the following symptom may occur when PSWC is opened
repeatedly many times.
Switch No. : 36
Hex Assignment - 00 : Default
Hex Assignment - 01 : When the MFP with Management Device 2 is installed or New user for User Authentication is
registered, “Black Only” is selected in Function Permission setting.
54. If Twaiwanese is used for Panel Keyboard Language on the enlarge Display Mode, the inputted character is not displayed.
55. When printing the specific PDF file using Direct Print, PS error page is printed.
56. The following setting informations can not be acquired by CSRC.
4/10
Program Release Information
CSES ID-No. DLBT1202573EN00
bizhub C754/C654
MFP firmware Ver.G20-68
Subject: bizhub C754/C654 Mass-Production Program Maintenance Release 2 (Ver.G20-68)(for Web Browser (LK-101v3))
2012/11/26
1. Select the copy program registered on the 2nd page (or the 1st page) and move to the 1st page (or the 2nd page).
2. If "Recall" button is touched, the copy program registered on the 1st page (or the 2nd page) in the same position is
reflectded.
59. If Address book is displayed from Address Type under the following situation, the Address icon type is not displayed
correctly.
- Address book name is the same although Address Type differs.
60. C-E301 occurs if "Rotate Page" button or "Delete Page" button is touched by Real-Time Preview for Scan to Box.
61. The following setting is returned to default setting if Main power SW is turned off and on.
- Toner Near Empty Warning Display Time
62. If two A5LEF size documents are set in ADF and perform Scan to SMB with "Cover+2-sided", "Now Scanning Original"
continues to be displayed.
63. If performing Scan to FTP with the following file type, the transmitted file cannot be opened.
- PPTX
64. When the loadable driver for Ysoft is already installed, C-E301 occurs if the loadable driver is installed.
65. When receiveing PC print job while the sub Power SW is turned off under the following setting, the PC print job is not printed
out even if the sub Power SW is turned on.
- Power Saving Fax/Scan = "Power Save"
66. Correct the wrong Simplified Chinese wording for Copy Button Name on Top menu.
67. When Debug log function is ON, Panel lock occurs if login as the user who does not exist in LDAP server on "Main+External
Server" authentication environment.
68. If the following MIBs are acquired while printing Job, the MIB values are "zero-length".
- “prtInputMediaName” and “prtInputMediaType”
69. The Conflict Error is not displayed in the following combinations on FAX/Scan mode.
- Black
- Compact PDF, JPEG, Compact XPS
70. Job is not stopped even if the stop key is pushed on the warning screen of maximum number of pages with staple.
71. If paper empty occurs when printing the Increase Priority job, the Increase Priority job can not be restarted even if the paper
tray is changed.
72. When the setteing of program job is changed, the original is not scanned and the completion screen is displayed if the
preview is pushed on the Tab original screen.
73. If the Register Key for OpenAPI Application is pushed on "Insert Plug-in Counter" screen, it is not connected to application
and "Insert Plug-in Counter" screen is displayed again.
74. If the document details for the document in the Password Encrypted PDF User Box is opened, the selected document is not
selected and the first document in the list is selected.
75. If recall the program registered by program job is ON, "Now scanning original(s)" keeps displaying and the preview is not
displayed if displaying the preview.
5/10
Program Release Information
CSES ID-No. DLBT1202573EN00
bizhub C754/C654
MFP firmware Ver.G20-68
Subject: bizhub C754/C654 Mass-Production Program Maintenance Release 2 (Ver.G20-68)(for Web Browser (LK-101v3))
2012/11/26
76. If "OFF"is selected in IPv6 setting under the following settings, "The network data is now being processed...." keeps
displaying and MFP hangs up.
<DPWS Settings>
- Enable Proxy : ON
- Register Proxy : IPv6 Address Input
- Scanner Settings : On
77. The following French wordings is changed.
7/10
Program Release Information
CSES ID-No. DLBT1202573EN00
bizhub C754/C654
MFP firmware Ver.G20-68
Subject: bizhub C754/C654 Mass-Production Program Maintenance Release 2 (Ver.G20-68)(for Web Browser (LK-101v3))
2012/11/26
3. Functional restrictions
3.1. Remaining Issue
The following issues will be corrected in maintenance release (End of January, 2013).
1. User Authentication fails if the following operations are executed while the Primary Enhanced Authentication Server is in out
of operation.
- Log in from the network (PSWC etc.) while being logged in from the operation panel.
- Log in from the operation panel while being logged in from the network (PSWC etc.).
2. The square mark may be displayed in the specific web site.
3. Some characters may be broken in the specific web site.
4. If sorting the information in the specific web site, some column may not be displayed.
[Workaround]
Set the number of copies in properties of the printer driver.
2. An MS-Excel file that can be printed as one page with 600dpi setting may be printed in 2 pages if the resolution is changed
from 600dpi to 1200dpi. (This is a problem caused by the application software.)
[Workaround]
Perform the following steps, when you install the XPS driver via SMB.
1. Open the Devices and Printers, then click [Add a printer].
2. Select the [Local printer].
3. Select the [Create a new port] and choose the [Local Port].
4. Enter "¥¥NetBios name¥service name" for the [Port Name].
5. If the "readme" is opened by the Auto Run in the CD-ROM that is comes with the MFP using IE8 or IE9 then print it by using
XPS preview function, an error message is displayed and it can not be printed.
8/10
Program Release Information
CSES ID-No. DLBT1202573EN00
bizhub C754/C654
MFP firmware Ver.G20-68
Subject: bizhub C754/C654 Mass-Production Program Maintenance Release 2 (Ver.G20-68)(for Web Browser (LK-101v3))
2012/11/26
9. The function of Google and SharePointServer does not work correctly from Web Browser.
The web site (Google and SharePointServer etc.) where contents and a function are always updated is not supported.
* Refer to the Readme.txt file which is included in each driver and application for other functional restrictions.
* Additional memory installation is required when using the following Open API function.
- Initial screen customization
4. How to install
4.1. How to install program
Use USB memory to install. For the details, see the Service Manual.
Conditions for USB memory which can be used for updating the firmware are as follows:
- Securities such as data encryption and password lock shall be released, or the security function shall be turned Off.
- Memory with 1 GB to 2 GB are recommended (One with 4 GB or more may not operate)
- Compatible with USB Version 1.0/2.0 interface
- Formatted with FAT32 type
- A USB flash memory that appears as multiple drives on a computer cannot be used.
4.5. How to install OCR Dictionary Data for Searchable PDF and PDF/A Font Data
Use USB memory to install. For the details, see the Service Manual.
i-Option kit is required to use these functions.
4.6. How to install Unicode Font Data and OCR Font Data
Install Font Data for LPR using LPR command from the PC.
Install Font Data for USB using USB memory.
For the details, see the Service Manual.
i-Option kit is required to use these functions
9/10
Program Release Information
CSES ID-No. DLBT1202573EN00
bizhub C754/C654
MFP firmware Ver.G20-68
Subject: bizhub C754/C654 Mass-Production Program Maintenance Release 2 (Ver.G20-68)(for Web Browser (LK-101v3))
2012/11/26
4.7. How to install Loadable Driver
1. Extract the attached exe file and save “xxxxxx.tar” file to root directory of USB memory.
2. Insert the USB memory to USB port of MFP.
3. Call the Service Mode to the screen.
4. Touch [System 2] -> [Driver Install].
5. Touch [SET] and press “Start” button to start installing the data.
6. Check that data is normally installed from the message that appears on the control panel.
7. Turn OFF/ON the main switch.
8. In the Service Mode> Billing Setting> Management Function Choice, select “Card” or “Body” in “Authentication
Device2” and press “OK” button.
9. Turn OFF/ON the main switch.
OpenAPI:
OpenAPI Function Level 3.7.2
Detail:
Auth 1.0/1.1/2.0/2.1/2.5/3.5/3.6/3.7
Scan to Application 2.0/2.1/2.2/3.0/3.1/3.5/3.6/3.7
PullPrint 1.0/1.1/2.0/2.1/2.5/3.5/3.6
Other A 1.0/3.5
Setup 1.0/1.1/1.2/1.3/2.0/2.1/2.5/3.5/3.6/3.7/3.8
Auth 1.0/1.1/1.5/3.5/3.6/3.7
Launcher 1.0/3.5
* Company names and product names in this document are the registered trademarks for respective companies.
Copyright(C) 2012 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
10/10