Professional Documents
Culture Documents
1. Unpack the Test Loader device,Test Loader stand and USB cable from the accessories as shown
in below figure
2. Place USB -B (Right angle) end of USB cable inside the Test Loader stand as shown in below
figure.
XL-200
2-18 System Installation
5. Once connected to analyzer PC, it gives the beep sound that means now Test Loader is ready to
use.
6. Now Keep the System Reagent pack in front of scan side of Test Loaderr device as shown in
below figure.
7. Go to Status Monitor > Scan Pack > System Pack details > Scan Pack, scanned details will be
displayed on analyzer PC.
XL-200