Professional Documents
Culture Documents
Sandvik diamond product continually evolves with additional or improved designs superseding the published part numbers.
Please consult with a Sandvik
Professional for the most up-to-date offering and refer to the latest electronic revision to this catalog whenever available.
Sandvik reserves the right to
Update specifications and part numbers without prior notice.
Core drilling, diamond products C2-570ENG:1 is valid from March 30 2016
©Sandvik Mining 2016 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
1
Sandvik Mining Exploration
INDEX
2
Sandvik Mining Exploration
INDEX
Core Barrel System Page
Sandvik Core barrel system cover page 52
Sandvik Multifunctional System 53
NSU and HSU Assembly /SU Information 54/55/56
NSU/N3SU/N2SU
Wireline Core Barrel System 57/68
HSU/H2SU/H3SU
Wireline Core Barrel System 69/80
Core Barrel and Casing
RP621 Series Casing W and HWT Threads 81/82
RP622 Series Rods Standard Wireline Rods 83/85
RP623 Series Rods Standard Wireline Rods 86/88
RP625 Series Rods Heavy Duty Wireline Rods 89/91
RP630 Series Rods Heavy Duty Wireline Drill Rods Light weight 92/94
RP635 Series Rods Wireline Drill Rods Light Weight 95/97
RP662 Series TK Drill Rods 98/99
RP663 Series TK Drill Rods 98/99
B Cam Latch 100/106
N Cam Latch 107/117
H Cam Latch 118/126
P Cam Latch 127/135
Adaptors and Subs 136/141
Casing Cutters 142/146
Recovery Taps and Bowen Spear Fishing Tools 147
Water Swivels and hoisting plugs 148/153
Conventional Core Barrels
4C 154/157
8C 158/161
Wedging Tools 162/163
Wedging Tools Manual
Drill Rod Care and Handling 164/179
3
Sandvik Mining Exploration
Equipment and tools
Overview
OVERVIEW
4
Sandvik Mining Exploration
Sandvik Offering Bit Series
Product Selection PCD Bit ( Poly Crystalline Diamond ) RV200
SELECTION
Directional Wedging ( Bits and Tools) RV300
set for a global exploration industry. The original
Impregnated Core Bits RV400/RZ400
organization to establish these standards was the
Surface Set Core Bits RV500
DCDMA, but now standards are largely controlled
through the ISO 9001 quality process. Reamers RV600
Listed below are the more popular sizes/systems Casing shoes RV700
which have been around for over half a century
Special RV800
Bit Size OD mm OD In ID mm ID In
Hole Core
B 59.9 2.360 36.4 1.442
mm in mm in
N 75.7 2.980 47.6 1.875
H3 96.1 3.780 61.1 2.406 The bit is the most complicated of the diamond tools
because so many factors influence its performance
P 122.6 4.830 85. 3.345
and life. It is important to gather as much data as
P3 122.6 4.830 83 3.270
possible in regards to the formation to be drilled.
As the industry has evolved, variations to the
Standard systems have been introduced including:
• Wireline system which affected the rod and
core barrel design and incorporated the use of a
Wireline overshot.
• Triple-tube system which affected the core barrel
and the bit design and allowed for a second split
Inner tube to be used so that an undisturbed
sample of very broken core could be viewed in its
original state.
• Thin kerf or light weight systems which effected
the design and dimensions of the entire drill
string to allow for a larger core sample to be
retrieved at increased depths or in similar sized
hole.
Diamond products
This group of tools makes up some of the main
consumables on any drilling operation and can
include bits, reaming shells (reamers), and casing
or rod shoes. Understanding the composition and
application is essential to the success of any drilling
program
5
Sandvik Mining Exploration
Diamond impregnated bits Crown (matrix):
The crown (or matrix) of an impregnated bit is made
This is the most widely used bit in the industry today. up of a number of metal powders which are blended
There are a number of variations being offered, but with selected synthetic diamonds. These materials are
generally speaking the composition is as follows. then packed into a mold and fused into one mass by
the infiltration of molten alloys during a furnacing
process. This process also adheres the crown to the
The blank is the steel body of the bit. One end is diamonds are usually identified by its series rating
threaded so that the bit can be connected to the drill which in turn gives a different wear rate and
string while the other end is bonded to the crown. resistance to abrasion.
6
Sandvik Mining Exploration
Rock drilling Parameters
PARAMETERS
Drill Bit
High powered — There is risk of overfeeding the bit so it
Many things have to be taken into account when The rotating action of the bit causes the exposed
reviewing the ground conditions to be drilled: diamonds to cut into the rock mass. It is measured as
• On a scale from very soft to very hard, what are the rotational velocity of the outside diameter of the
the current conditions? Bit which has the highest cutting speed in general the
• Does the formation appear to be unconsolidated, More rotation per minute the faster the rate of
fractured, or competent? Penetration. The rotation speed is also important part
• Would it be considered abrasive, coarse, or fine Of keeping the bit matrix wearing to expose new
performance.
Bit performance
• Hole deviation
and ROP.
PARAMETERS
For example:
Functions:
• Removes the cuttings (rock particles) from the face of the bit
and carries them out of the hole
B 18-27 Litres/Min
9
Sandvik Mining Exploration
Rotational speeds Rock properties
Generally speaking, impregnated bits require Two parameters which define how easily a rock may
PARAMETERS
high rotational speeds to achieve an acceptable be drilled are its strength and its fracture toughness
penetration rate. The recommended speed range will — they reflect how easily a crack can be formed in
produce a peripheral speed on the outside diameter the rock and how easily the rock can be expanded.
of the bit between 3-5 m/sec (5-7 ft/sec). Of course Rock strength depends on its mineral composition.
this is dependent upon whether the drill is capable of For example, sandstone cemented with calcite has
producing the necessary rotational speeds and if the low strength because the calcite that binds the grains
hole conditions will allow this speed to be used. together is weak, whereas granite will have a higher
Given that friction causes heat it is also safe to strength because there is no continuous weak phase.
deduce that the faster you rotate the bit the hotter it In the same way quartzite may have a higher strength
will become. Studies have shown that running the bits than either of these because it is all quartz. However,
faster than recommended speeds can result in changes quartzite has a lower fracture toughness than granite
to the metallurgical make up of the matrix causing because there is a continuous medium, the silica
it to change its properties and drill in a different cement, that allows a fracture to expand. Granite is
manner for which it was designed. If excessive speed made up of inter-grown crystals with no continuous
and weight on the bit are used, temperatures can medium and the fracture has to continually keep
reach up to 900°C which will cause the matrix to crossing crystal boundaries. Basalt has an even
melt resulting in what is commonly referred to as higher fracture toughness because of its crystalline
burning in the bit. This process can take place in nature and small crystal size. This means that an
seconds if the correct parameters relating to fluid expanding fracture meets crystal boundaries more
often.
flow, WOB, RPM and ROP are not applied
Basalt High 200 - 300 0% Quartz Low Fine grained crystalline rock
Granite Medium 150 - 200 20% quartz Low Course grained crystalline
80% rock
silicates
10
Sandvik Mining Exploration
There is one other rock property which is of Generally speaking, the harder the minerals are that
importance in drilling with diamond bits. This is are found within the rock, the more abrasive it is
PARAMETERS
the abrasiveness of the rock, which affects both likely to be. Of the common rock forming minerals
penetration and the life of the bit. The abrasiveness quartz has a high hardness so rocks which contain
of the rock is controlled by its mineralogical make large quantities of quartz are abrasive. Sandstone
up, thus a rock which contains many soft minerals therefore is much more abrasive than basalt, despite
is less abrasive than one which contains many hard being softer, because it contains in the order of 6%
to identify rock hardness is the MOH’s scale of From this knowledge of mineralogy and mode
hardness. The table below shows the scale with 1 of origin of rock it is possible to determine, in
being the softest and 10 the hardest qualitative terms, how it will react to being drilled
The scale is non-linear, being that there is a greater with a diamond bit. Despite strenuous efforts by
difference in the hardness between diamond and many people around the world it still cannot be done
calcite.
• Copper coin 3
• Glass 5-5.5
6 Feldspars Steel knife does not scratch it easily, but it scratches glass
11
Sandvik Mining Exploration
RV 200 series
RV200/RV300 SERIES
wear resistance.
Contain Methane
RV 300 series
Directional and wedging bits
The RV300 series of tools are typically used in
12
Sandvik Mining Exploration
RV400/RZ400 series
RV/RZ400 SERIES
Impregnated diamond coring bits
Impregnated diamond coring bits
In an impregnated drill bit, synthetic diamonds
exposed.
exposed quicker.
Face Discharge
Bit selection chart - RV 400 /RZ 400 series
lowest number is developed for badly fractured, Sand Bit Thin Kerf Turbo
rocks.
13
Sandvik Mining Exploration
RV 400/RZ 400 series
RV/RZ400 SERIES
Bit data
Standard Size
Hole Diameter Core Diameter Hole Volume Bit Kerf Width Rod/Hole annulus
Size
MM In MM In L/M US gal/ft MM In L/M US gal/ft
B 59.94 2.360 36.40 1.442 2.82 0.228 11.58 0.46 0.40 0.032
N 75.69 2.980 47.63 1.875 4.50 0.364 13.84 0.55 0.67 0.054
N2 75.69 2.980 50.67 1.995 4.50 0.364 12.32 0.49 0.67 0.054
N3 75.69 2.980 45.09 1.775 4.50 0.364 15.11 0.60 0.67 0.054
H 96.06 3.782 63.50 2.500 7.25 0.586 16.04 0.63 1.04 0.084
H3 96.06 3.782 61.11 2.406 7.25 0.586 17.23 0.68 1.04 0.084
P 122.61 4.827 84.96 3.345 11.81 0.995 18.54 0.73 1.55 0.125
P3 122.61 4.827 83.06 3.270 11.81 0.955 19.49 0.77 1.55 0.125
T46 46.36 1.825 31.90 1.255 1.73 0.140 7.34 0.284 0.27 0.022
T56 56.50 2.220 41.90 1.649 2.53 0.204 7.70 0.287 0.31 0.025
T66 66.36 2.612 51.90 2.043 3.54 0.285 7.23 0.284 0.33 0.27
T76 76.50 3.011 61.90 2.437 4.57 0.368 7.30 0.287 0.36 0.031
T86 86.40 3.401 71.90 2.830 5.06 0.451 7.25 0.285 0.39 0.031
T101 103.35 4.068 83.90 3.303 8.3 0.668 9.72 0.382 0.76 0.061
14
Sandvik Mining Exploration
RV 500 series
RV500/RV600 SERIES
Surface set coring bits
Surface set coring bits are characterized by a layer of
Sandvik
RV 600 series
Reaming shells
The reaming shell is the component of a drill string
hole.
15
Sandvik Mining Exploration
RV 700 series
Casing shoes
RV700 SERIES
expensive.
Dolomite/Sepentinite/
Soft- Abrasive medium to coarse 3 7AA.6 4-6
3 to 5 Sandstone/Weathered 02, SSUMX Hero 7 HR7
Medium grain comepent to fracture 4-6 7AC 5-7
granite/Gneiss 06ABR,
SSUMX
Medium grain competent to 06/07 06ABR 5-7
Medium 5 to 6 Basalt/Diorite/Gneiss 07UMX 7AC Hero 9 HR7
fractured 07 07ABR 6-8
09UMX
07UMX
Diorite/Granite/Gneiss/ Medium to fine grain slight- 09 08ABR HR10
Hard 7 to 8 09UMX 11 AC 8-9 Hero 11
Quartzite/Andesite ly abrasive 09-11 09ABR HR12
10UMX
09,
Hard to Glassy Quartzite Rhy- 09UMX
9 Fine grain non abrasive 12-14 09 COM 10 Hero 14 HR14
Very Hard olite /Porphyry 10 UMX
10 COM
16
Sandvik Mining Exploration
DIAMOND PRODUCTS — AXT & BX
AXT-BX SYSTEMS
RV400 Series Impregnated Core Bit AXT
AXT Front Standard 48 +/- 0.12 AXT bit box/A rod box Reamer BG00641979
Crown
Size Series Face design Description Item Number
Height
BX U8 Standard 6 mm Core Bit BX RV400-06-8U-STD BG00642151
BX Front Standard 59.9 +/- 0.12 BX bit box/B rod box Reamer BG00641981
Core Spring
17
Sandvik Mining Exploration
DIAMOND PRODUCTS — B SYSTEMS
B SYSTEMS
Crown
Size Series Face Design Description Item Number
Height
B 06/07 STD 12 Core Bit B RV400 06/07 12 STD BF00001256
B 06/07 STD 16 Core Bit B RV400 06/07 16 STD BF00005589
B 08/09 STD 12 Core Bit B RV400 08/09 12 STD BF00001257
B 08/09 STD 16 Core Bit B RV400 08/09 16 STD BF00005590
B 09/11 STD 12 Core Bit B RV400 09/11 12 STD BF00001258
B 09/11 STD 16 Core Bit B RV400 09/11 16 STD BF00005591
B 13 STD 10 Core Bit B RV400 13 10 STD BF00004698
B 14 STD 10 Core Bit B RV400 14 10 STD BF00004674
B 06/07 TW 12 Core Bit B RV400 06/07 12 TW BF00003608
B 06/07 TW 16 Core Bit B RV400 06/07 16 TW BF00005594
B 08/09 TW 12 Core Bit B RV400 08/09 12 TW BF00003609
B 08/09 TW 16 Core Bit B RV400 08/09 16 TW BF00005595
B 09/11 TW 12 Core Bit B RV400 09/11 12 TW BF00003610
B 09/11 TW 16 Core Bit B RV400 09/11 16 TW BF00005596
B 06/07 TURBO 16 Core Bit B RV400 06/07 16 TURBO BF00005599
B 08/09 TURBO 16 Core Bit B RV400 08/09 16 TURBO BF00005600
B 09/11 TURBO 16 Core Bit B RV400 09/11 16 TURBO BF00005601
18
Sandvik Mining Exploration
DIAMOND PRODUCTS — B SYSTEMS
B SYSTEMS
RZ400 Series Impregnated Bit - B-Size
Size Series Face design Crown Height Description Item Number
B 4/6 STD 12 Core Bit B RZ400 4/6 12 STD BF00008000
B 4/6 STD 16 Core Bit B RZ400 4/6 16 STD BF00008001
B 07 STD 12 Core Bit B RZ400 07 12 STD BF00008038
B 07 STD 16 Core Bit B RZ40007 16 STD BF00008039
B 09 STD 12 Core Bit B RZ400 09 12 STD BG00620601
B 09 STD 16 Core Bit B RZ400 09 16 STD BG00620602
B 12/14 STD 12 Core Bit B RZ400 12/14 12 STD BF00005371
B 12/14 STD 16 Core Bit B RZ400 12/14 16 STD BF00005592
B 4/6 TW 12 Core Bit B RZ400 4/6 12 TW BF00008002
B 4/6 TW 16 Core Bit B RZ400 4/6 16 TW BF00008003
B 07 TW 12 Core Bit B RZ400 07 12 TW BF00008040
B 07 TW 16 Core Bit B RZ400 07 16 TW BF00008041
B 09 TW 12 Core Bit B RZ400 09 12 TW BG00620603
B 09 TW 16 Core Bit B RZ400 09 16 TW BG00620604
B 12/14 TW 12 Core Bit B RZ400 12/14 12 TW BF00005372
B 12/14 TW 16 Core Bit B RZ400 12/14 16 TW BF00005597
B 07 TURBO 16 Core Bit B RZ400 07 16 TURBO BF00008043
B 12/14 TURBO 16 Core Bit B RZ400 12/14 16 TURBO BF00005602
19
Sandvik Mining Exploration
DIAMOND PRODUCTS — N SYSTEMS
N SYSTEMS
PCD Crown
Size Face design Description Item Number
Size Height
N 08/08 STD PCD Core Bit N RV200 08/08 BF00004667
RV300 Series Wedging Bits - N-Size
Crown
Size Series Step Face Description Item Number
Height
N 8 7 6 mm Wedge Core Bit N RV300-08-06 BF00004688
N 10 7 6 mm Wedge Core Bit N RV300-10-06 BG00611754
Crown
Size Series Face Design Description Item Number
Height
N 12/14 TURBO 12 mm Wedge Core Bit N RZ400-12/14 12 T BG00723246
Crown
Size Series Face design Description Item Number
Height
N 06/07 STD 12 Core Bit N RV400 06/07 12 STD BF00001275
N 06/07 STD 16 Core Bit N RV400 06/07 16 STD BF00005619
N 08/09 STD 12 Core Bit N RV400 08/09 12 STD BF00001279
N 08/09 STD 16 Core Bit N RV400 08/09 16 STD BF00005620
N 09/11 STD 12 Core Bit N RV400 09/11 12 STD BF00001278
N 09/11 STD 16 Core Bit N RV400 09/11 16 STD BF00005621
N 13 STD 10 Core Bit N RV400 10 13 STD BF00004708
N 14 STD 10 Core Bit N RV400 10 14 STD BF00004709
N 06/07 TW 12 Core Bit N RV400 06/07 12 TW BF00003630
N 06/07 TW 16 Core Bit N RV400 06/07 16 TW BF00005624
N 08/09 TW 12 Core Bit N RV400 08/09 12 TW BF00004058
N 08/09 TW 16 Core Bit N RV400 08/09 16 TW BF00005625
N 09/11 TW 12 Core Bit N RV400 09/11 12 TW BF00003631
N 09/11 TW 16 Core Bit N RV400 09/11 16 TW BF00005626
N 06/07 TURBO 16 Core Bit N RV400 06/07 16 TURBO BF00005629
N 08/09 TURBO 16 Core Bit N RV400 06/07 16 TURBO BF00005630
N 09/11 TURBO 16 Core Bit N RV400 09/11 16 TURBO BF00005631
20
Sandvik Mining Exploration
DIAMOND PRODUCTS — N SYSTEMS
N SYSTEMS
RZ400 Series Impregnated Bit - N-Size
Size Series Face design Crown Height Description Item Number
N 4/6 STD 12 Core Bit N RZ400 4/6 12 STD BF00008006
N 4/6 STD 16 Core Bit N RZ400 4/6 16 STD BF00008007
N 07 STD 12 Core Bit N RZ400 07 12 STD BF00008044
N 07 STD 16 Core Bit N RZ400 07 16 STD BF00008045
N 09 STD 12 Core Bit N RZ400 09 12 STD BG00553060
N 09 STD 16 Core Bit N RZ400 09 16 STD BG00620605
N 12/14 STD 12 Core Bit N RZ400 12 /14 12 STD BF00005373
N 12/14 STD 16 Core Bit N RZ400 12/14 16 STD BF00005622
N 4/6 TW 12 Core Bit N RZ400 4/6 12 TW BF00008008
N 4/6 TW 16 Core Bit N RZ400 4/6 16 TW BF00008009
N 07 TW 12 Core Bit N RZ400 07 12 TW BF00008046
N 07 TW 16 Core Bit N RZ400 07 16 TW BF00008047
N 09 TW 12 Core Bit N RZ400 09 12 TW BG00620606
N 09 TW 16 Core Bit N RZ400 09 16 TW BG00620607
N 12/14 TW 12 Core Bit N RZ400 12/14 12 TW BF00005374
N 12/14 TW 16 Core Bit N RZ400 12/14 16 TW BF00005627
N 07 TURBO 16 Core Bit N RZ400 07 16 TURBO BF00008049
N 12/14 TURBO 16 Core Bit N RZ400 12/14 16 TURBO BF00005632
21
Sandvik Mining Exploration
DIAMOND PRODUCTS — N SYSTEMS
N SYSTEMS
22
Sandvik Mining Exploration
DIAMOND PRODUCTS — N2—SYSTEMS
N2 SYSTEMS
RV300 Series Wedging Bits - N2-Size
Crown
Size Series Step Face Description Item Number
Height
N2 8 7 6 mm Wedge Core Bit N2 RV300-08-06 BG00611755
N2 10 7 6 mm Wedge Core Bit N2 RV300-10-06 BG00611756
Crown
Size Series Face design Description Item Number
Height
N2 06/07 STD 12 Core Bit N2 RV400 06/07 12 STD BF00001282
N2 06/07 STD 16 Core Bit N2 RV400 06/07 16 STD BF00005604
N2 08/09 STD 12 Core Bit N2 RV400 08/09 12 STD BF00001284
N2 08/09 STD 16 Core Bit N2 RV400 08/09 16 STD BF00005605
N2 09/11 STD 12 Core Bit N2 RV400 09/11 12 STD BF00001287
N2 09/11 STD 16 Core Bit N2 RV400 09/11 16 STD BF00005606
N2 13 STD 10 Core Bit N2 RV400 13 10 STD BF00004710
N2 14 STD 10 Core Bit N2 RV400 14 10 STD BF00004711
N2 06/07 TW 12 Core Bit N2 RV400 06/07 12 TW BF00003661
N2 06/07 TW 16 Core Bit N2 RV400 06/07 16 TW BF00005609
N2 08/09 TW 12 Core Bit N2 RV400 08/09 12 TW BF00003662
N2 08/09 TW 16 Core Bit N2 RV400 08/09 16 TW BF00005610
N2 09/11 TW 12 Core Bit N2 RV400 09/11 12 TW BF00003663
N2 09/11 TW 16 Core Bit N2 RV400 09/11 16 TW BF00005611
N2 06/07 TURBO 16 Core Bit N2 RV400 06/07 16 TURBO BF00005614
N2 08/09 TURBO 16 Core Bit N2 RV400 06/07 16 TURBO BF00005615
N2 09/11 TURBO 16 Core Bit N2 RV400 09/11 16 TURBO BF00005616
23
Sandvik Mining Exploration
DIAMOND PRODUCTS — N2—SYSTEMS
N2 SYSTEMS
24
Sandvik Mining Exploration
DIAMOND PRODUCTS — NX/N3/NW—SYSTEMS
NX SYSTEMS
RV300 Series Wedging Bit - NX—Navi- Size
Crown
Size Series Face design Description Item Number
Height
NX 12 Navi 10 Navi NX RV300 12 BW Rod Thread BF00004692
NX 13 Navi 10 Navi NX RV300 13 BW Rod Thread BF00005866
NX Imp Reamer NX RV300 Reamer BF00004732
60/80 Bull Nose bit NX RV300 AAA S/S
NX Bull Nose BF00005865
N3
SPC N Rod Thread
NW
Crown
Size Series Face design Description Item Number
Height
N3 06/07 FD 12 Core Bit N3 RV400 06/07 12 FD BF00003669
N3 08/09 FD 12 Core Bit N3 RV400 08/09 12 FD BF00003670
N3 09/11 FD 12 Core Bit N3 RV400 09/11 12 FD BF00003671
N3 06/07 NFD 12 Core Bit N3 RV400 06/07 12 NFD BF00003178
N3 08/09 NFD 12 Core Bit N3 RV400 08/09 12 NFD BF00003179
NFD
N3 09/11 NFD 12 Core Bit N3 RV400 09/11 12 NFD BF00003179
Crown
Size Series Face design Description Item Number
Height
N3 4/6 FD 12 Core Bit N3 RZ 400 4/6 12 FD BF00008019
N3 07 FD 12 Core Bit N3 RZ 400 07 12 FD BF00008057
N3 12/14 FD 12 Core Bit N3 RZ 400 12/14 12 FD BF00005379
N3 12/14 NFD 12 Core Bit N3 RZ 400 12/14 12 NFD BF00005377 FD
RV500 series Surface Set Bit -N3-Size
Diamond Ct Weight
Size Steps Description Item Number
Size Grade
N3 40/60 spc 6 17 AA Core Bit N3 RV500 6 Step 40/60 AA BF00004635
25
Sandvik Mining Exploration
DIAMOND PRODUCTS — H—SYSTEMS
H SYSTEMS
PCD Crown
Size Face design Description Item Number
Size Height
Soft
H 08/08 STD PCD Core Bit H RV200 08/08 BF00004665
Formation
Crown
Size Series Face design Description Item Number
Height
H 02 STD 12 Core Bit H RV400 02 12 STD BF00003181
H 06/07 STD 12 Core Bit H RV400 06/07 12 STD BF00003184
H 06/07 STD 16 Core Bit H RV400 06/07 16 STD BF00005634
H 08/09 STD 12 Core Bit H RV400 08/09 12 STD BF00003185
H 08/09 STD 16 Core Bit H RV400 08/09 16 STD BF00005635
H 09/11 STD 12 Core Bit H RV400 09/11 12 STD BF00003186
H 09/11 STD 16 Core Bit H RV400 09/11 16 STD BF00005636
H 13 STD 10 Core Bit H RV400 13 10 STD BF00004700
H 14 STD 10 Core Bit H RV400 14 10 STD BF00004699
H 02 TW 12 Core Bit H RV400 02 12 TW BF00003675
H 06/07 TW 12 Core Bit H RV400 06/07 12 TW BF00003678
H 06/07 TW 16 Core Bit H RV400 06/07 16 TW BF00005639
H 08/09 TW 12 Core Bit H RV400 08/09 12 TW BF00003679
H 08/09 TW 16 Core Bit H RV400 08/09 16 TW BF00005640
H 09/11 TW 12 Core Bit H RV400 09/11 12 TW BF00004057
H 09/11 TW 16 Core Bit H RV400 09/11 16 TW BF00005641
H 06/07 TURBO 16 Core Bit H RV400 06/07 16 TURBO BF00005644
H 08/09 TURBO 16 Core Bit H RV400 06/07 16 TURBO BF00005645
H 09/11 TURBO 16 Core Bit H RV400 09/11 16 TURBO BF00005646
26
Sandvik Mining Exploration
H SYSTEMS
DIAMOND PRODUCTS — H—SYSTEMS
27
Sandvik Mining Exploration
DIAMOND PRODUCTS — H—SYSTEMS
H SYSTEMS
H/H3 Front Standard 96.1 +/- 0.12 Reamer H RV600 STD Front BF00004445
H/H3 Front Over size 96.6 +/-0.12 Reamer H RV600 O/S Front BF00004446
H/H3 Front Bit size 95.6 +/- 0.12 Reamer H RV600 Bit Size Front BF00004619
H/H3 Back Standard 96.1 +/- 0.12 Reamer H RV600 STD Backend BF00004447
H/H3 Back Over size 96.6 +/- 0.12 Reamer H RV600 0/S Backend BF00004448
H/H3 Back Bit size 95.6 +/- 0.12 Reamer H RV600 Bit Size Backend BF00004618
RV700 series Casing Shoes-H Rod Shoe and Spud Shoe -Size
Size Series Face Design Crown Height Description Item Number
H 06 STD 6 mm Rod shoe H RV700 06 06 BF00004470
H 06 STD 6 mm Spud shoe H RV700 06 06 BF00004728
H 06 STD 6 mm Rod shoe H-HD RV700 06 06 BF00005508
28
Sandvik Mining Exploration
H3 SYSTEMS
DIAMOND PRODUCTS — H3-HX SYSTEMS
HX
H3 08/08 STEP PCD Core Bit H3 RV200 STD FD / STD THREAD BF00005492
H3 13/08 STEP PCD Core Bit H3 RV200 STD FD / STD THREAD BF00005493
H3 16/13 STEP PCD Core Bit H3 RV200 STD FD / STD THREAD BF00005494
Crown
Size Series Face design Description Item Number
Height
HX 12 Navi 10 Navi HX RV300 12 NW Rod Thread BF00004684
HX 13 Navi 10 Navi HX RV300 13 NW Rod Thread BF00004685
HX Imp Reamer HX RV300 Reamer BF00004683
60/80 Bull Nose bit HX RV300 AAA S/S
HX Bull Nose BF00004682
SPC N Rod Thread
29
Sandvik Mining Exploration
DIAMOND PRODUCTS —H3—SYSTEMS
RV400 Series Impregnated Bit - H3- Size
Crown
H3 SYSTEMS
Crown
Size Series Face design Description Item Number
Height
H3 4/6 SB 12 Core Bit H3 RZ400 4/6 12 SB BF00008028
H3 07 SB 12 Core Bit H3 RZ400 07 12 SB BF00008066
H3 09 SB 12 Core Bit H3 RZ400 09 12 SB BG00620615
H3 09 SB 16 Core Bit H3 RZ400 09 16 SB BG00620616
H3 12/14 SB 12 Core Bit H3 RZ400 12/14 12 SB BF00005383
H3 12/14 SB 16 Core Bit H3 RZ400 12/14 16 SB BF00005705
H3 4/6 FD 12 Core Bit H3 RZ400 4/6 12 FD BF00008029
H3 07 FD 12 Core Bit H3 RZ400 07 12 FD BF00008067
H3 09 FD 12 Core Bit H3 RZ400 09 12 FD BG00736579
H3 12/14 FD 12 Core Bit H3 RZ400 12/14 12 FD BF00005384
H3 12/14 NFD 12 Core Bit H3 RZ400 12/14 12 NFD BF00005382
Size PCD Size Face design Crown Height Description Item Number
HW
RV700 series Casing Shoes/ Spud Shoe HWT
Crown
Size Series Face Design Description Item Number
Height
HW 06 STD 6 mm Casing Shoe HW RV700 06 06 BF00004473
HW 06 STD 6 mm Spud shoe HW RV700 06 06 BF00004729
31
Sandvik Mining Exploration
DIAMOND PRODUCTS –P-SYSTEMS
P SYSTEMS
PCD Crown
Size Face design Description Item Number
Size Height
Soft PCD Core Bit P RV200
p 08/08 STD BF00005958
Formation
32
Sandvik Mining Exploration
P3 SYSTEMS
DIAMOND PRODUCTS –P3- SYSTEMS
33
Sandvik Mining Exploration
PWT SYSTEMS
34
Sandvik Mining Exploration
TK46 METRIC SYSTEMS
DIAMOND PRODUCTS—TK46 METRIC SYSTEMS
TK46 Front Standard 46.8 +/- 0.1 TK46 RV600 Premium Reamer BF00006010
35
Sandvik Mining Exploration
TK56 METRIC SYSTEMS
TK56 Front Standard 56.8 +/- 0.1 TK56 RV600 STD Premium Reamer BF00006011
TK56 Front Oversize 57.00 +/-0.1 TK56 RV600 0/S Premium Reamer BF00006015
36
Sandvik Mining Exploration
DIAMOND PRODUCTS—TK66-TK66-3 METRIC SYSTEMS
TK66-3
RZ400 Series Impregnated Bit - TK66- Size
Crown
Size Series Face design Description Item Number
Height
TK66 12/14 STD 12 Core Bit TK66 RZ400 12/14 12 STD BF00005395
TK66 12/14 TURBO 16 Core Bit TK66 RZ400 12/14 16 TURBO BG00611298
37
Sandvik Mining Exploration
DIAMOND PRODUCTS—TK76-76-3 METRIX SYSTEMS
TK76 METRIC SYSTEMS
TK76 12/14 TURBO 16 Core Bit TK76 RZ400 12/14 16 TURBO BG00611301
TK76 Front Standard 76.4 +/- 0.1 TK76 RV600 STD Premium Reamer BF00006013
TK76 Front Oversize 77.3 +/-0.1 TK76 RV600 0/S Premium Reamer BF00006017
38
Sandvik Mining Exploration
T46 METRIC SYSTEMS
DIAMOND PRODUCTS-T46– T56 METRIC SYSTEMS
RV400 Series Impregnated Bit - T46- Size
Crown
Size Series Face design Description Item Number
Height
T46 03 STD 9 Core Bit T46 RV400 03 9 STD BF00001361
T46 08/09 STD 9 Core Bit T46 RV400 08/09 9 STD BF00001364
T46 09/11 STD 9 Core Bit T46 RV400 09/11 9 STD BF00001365
T46 12 STD 9 Core Bit T46 RV400 12 9 STD BF00005250
T46 13 STD 9 Core Bit T46 RV400 13 9 STD BF00001366
T46 14 STD 9 Core Bit T46 RV400 14 9 STD BF00001367
T56
Crown
Size Series Face design Description Item Number
Height
T46 07 STD 9 Core Bit T46 RZ400 07 9 STD BF00008407
T46 12/14 STD 9 Core Bit T46 RZ400 12/14 9 STD BG00611330
39
Sandvik Mining Exploration
T66 METRIC SYSTEMS
DIAMOND PRODUCTS—T76-SYSTEMS
RV400 Series Impregnated Bit - T76- Size
40
Sandvik Mining Exploration
T86 METRIC SYSTEMS
DIAMOND PRODUCTS—T86-SYSTEMS
Face
Size Series Crown Height Description Item Number
design
T86 07 STD 9 Core Bit T86 RZ400 07 9 STD BG00740374
41
Sandvik Mining Explotation
DIAMOND PRODUCTS - T101-SYSTEMS
T101
DIAMOND PRODUCTS—T101-SYSTEMS
RV400 Series Impregnated Bit - T101- Size
Crown
Size Series Face design Description Item Number
Height
T101 03 STD 9 Core Bit T101 RV400 03 9 STD BF00001406
T101 08/09 STD 9 Core Bit T101 RV400 08/09 9 STD BF00001409
Crown
Size Series Face design Description Item Number
Height
T101 07 STD 9 Core Bit T101 RZ400 07 9 STD BG00611386
42
Sandvik Mining Exploration
METRC CASING SHOES AND CLEANING BITS
CLEANING BITS
RV700 series Casing Shoes HD86
Size Series Face Design Crown Height Description Item Number
HD86 STD 6 mm Casing Shoe HD86 RV700 BF00001455
43
Sandvik Mining Exploration
4C CONVETIONAL
Formation
4C 08/13 FD Soft PCD Core Bit 4C RV200 FD BF00005959
Formation
44
Sandvik Mining Exploration
8C CONVETIONAL
DIAMOND PRODUCTS-CONVENTIONAL 8C SYSTEMS
Formation
8C 13 STD Soft PCD Core Bit 8C RV200 STD BF00004662
Formation
8C 08 STD Soft PCD Core Bit 8C RV200 STD BF00004663
Formation
45
Sandvik Mining Exploration
RV200 PCD SYSTEMS
DIAMOND PRODUCTS-PCD-RV200
Face
Size Cutters MM Thread Description Item Number
Blade
52.5 3 BLADE 08 AW PIN PCD BIT 52.5 Non Coring BG00635686
55 F/F 08 AW PIN PCD 55 Non Coring BG00577422
60.5 3 BLADE 08 WING B ROD BOX PCD 60.5 Non Coring BG00642159
65 F/F 08 B ROD PIN PCD 65 Non Coring BG00577423
N/76 3 BLADE 13 N ROD BOX PCD Bit N/76 Non Coring BG00642166
N/76 3 BLADE 13 NW PIN PCD Bit N/76 Non Coring BF00005354
85 OD x 56 ID F/F 08 N PIN PCD Bit 85 OD x56 ID BG00635619
H/96 3 BLADE 13 NW PIN PCD Bit H/96 Non Coring BF00005284
99 F/F 13 NW PIN PCD Bit 99 Non Coring BF00004664
H/96 F/F 13 NW PIN PCD H/96 Non Coring BF00008202
P/123 3 BLADE 08 2 3/8 API PCD P/123 BF00004660
4 1/2’’ 3 BLADE 13 BLADE 2 3/8 API PCD 4 1/2’’ BF00005180
5 1/2 ‘’ 3 BLADE 13 BLADE 2 7/8 API &3/1/2 API PCD 5 1/2’’ BF00005181
5 1/8’’ 3 BLADE 13 BLADE 2 7/8 API PCD 5 1/8’’ BF00005185
5 1/8’’ 5 BLADE 16 BLADE 2 7/8 API PCD 5 1/8’’ BF00005186
5 5/8’’ 5 BLADE 16 BLADE 3 1/2 API PCD 5 5/8’’ BF00005187
5 7/8’’ 5 BLADE 13 WING 3 1/2 REG API PCD 5 7/8’’ BF00005966
4 3/4’’ 5 BLADE 13 WING 2 7/8 REG API PCD 4 3/4’’ BF00005968
4 3/4’’ 3 BLADE 13 WING 2 7/8 REG API PCD 4 3/4’’ BF00005969
INFORMATION
Size OD Weight Per Foot Wall Thick- API Drift Diam-
side Diameter pling OD inch- ter
Inches Nominal Ibs ness inches eter inches
Inches es Inches mm
9.5 0.205 4.090 5.000 3.965 3 7/8 98.4
10.5 0.224 4.052 5.000 3.927 3 7/8 98.4
4 1/4
11.6 0.250 4.000 5.000 3.875 3 7/8 98.4
13.5 0.290 3.920 5.000 3.795 3 3/4 95.2
11.50 0.220 4.560 5.653 4.435 4 1/4 107.9
13.00 0.253 4.494 5.653 4.369 4 1/4 107.9
5
15.00 0.296 4.408 5.653 4.283 4 1/4 107.9
18.00 0.362 4.276 5.653 4.151 4 1/8 104.8
14.00 0.244 5.012 6.050 4.887 4 7/8 123.8
15.50 0.275 4.950 6.050 4.825 4 3/4 120.7
5 1/2 17.00 0.304 4.892 6.050 4.767 4 3/4 120.7
20.00 0.361 4.778 6.050 4.653 4 5/8 117.5
25.00 0.415 4.670 6.050 4.545 4 1/2 114.3
20.00 0.288 6.049 7.390 5.925 5 7/8 149.2
24.00 0.352 5.921 7.390 5.796 5 3/4 146.1
6 5/8
28.00 0.417 5.791 7.390 5.666 5 5/8 142.00
32.00 0.475 5.675 7.370 5.550 5 1/4 133.4
17.00 0.231 5.538 7.656 6.413 6 1/4 158.7
20.00 0.272 6.456 7.656 6.331 6 1/4 158.7
23.00 0.317 6.366 7.656 6.241 6 1/4 158.7
26.00 0.362 6.276 7.656 6.151 6 1/8 155.5
7
29.00 0.408 6.184 7.656 6.059 6 152.4
32.00 0.453 6.094 7.656 5.969 5 7/8 149.2
35.00 0.498 6.004 7.656 5.879 5 7/8 149.2
38.00 0.540 5.920 7.656 5.795 5 3/4 146.1
24.00 0.300 7.025 8.500 6.900 6 3/4 171.4
26.20 0.328 6.969 8.500 6.844 6 3/4 171.4
7 5/8 29.70 0.375 6.875 8.500 6.750 6 3/4 171.4
33.70 0.430 6.765 8.500 6.640 6 1/2 165.1
39.00 0.500 6.625 8.500 6.500 6 1/2 165.1
24.00 0.264 8.097 9.625 7.972 7 7/8 200.0
28.00 0.304 8.017 9.625 7.892 7 7/8 200.0
32.00 0.352 7.921 9.625 7.796 7 5/8 193.7
8 5/8 36.00 0.400 7.825 9.625 7.700 7 5/8 193.7
40.00 0.450 7.725 9.625 7.600 6 1/4 171.4
44.00 0.500 7.625 9.625 7.500 6 1/4 171.4
49.00 0.557 7.511 9.625 7.386 6 1/4 171.4
47
Sandvik Mining Exploration
PCD WATER FLOW INFORMATION
7/32 0.0375 0.0751 0.1127 0.1503 0.1879 0.2254 0.2630 0.3006 0.3382 0.3758
8/32 0.0490 0.0981 0.1472 0.1963 0.2454 0.2945 0.3436 0.3926 0.4417 0.4908
9/32 0.0621 0.1242 0.1863 0.2485 0.3106 0.3727 0.4348 0.4970 0.5591 0.6212
10/32 0.0766 0.1533 0.2300 0.3067 0.3834 0.4601 0.5368 0.6135 0.6902 0.7669
11/32 0.0928 0.1856 0.2784 0.3712 0.4640 0.5568 0.6496 0.7424 0.8352 0.9280
12/32 0.1104 0.2208 0.3313 0.4417 0.5522 0.6626 0.7731 0.8835 0.9940 1.1044
13/32 0.1296 0.2592 0.3888 0.5184 0.6481 0.7777 0.9073 1.0369 1.1665 1.2962
14/32 0.1503 0.3006 0.4509 .06013 0.7516 0.9019 1.0523 1.2026 1.3529 1.5036
15/32 0.1725 0.3451 0.5177 0.6902 0.8628 1.0354 1.2080 1.3805 1.5531 1.7257
16/32 0.1963 0.3926 0.5890 0.7853 0.9817 1.1780 1.3744 1.5707 1.7671 1.9634
18/32 0.2485 0.4970 0.7455 0.9940 1.2425 1.4910 1.7395 1.9880 2.2365 2.4850
19/32 0.2769 0.5535 0.8306 1.1075 1.3844 1.6613 1.9382 2.2151 2.4919 2.7688
20/32 0.3067 0.6135 0.9203 1.2271 1.5339 1.8407 2.1475 2.4543 2.7611 3.0679
21/32 0.3382 0.6765 1.0147 1.3530 1.6912 2.0295 2.3677 2.7059 3.0442 3.3824
22/32 0.3712 0.7424 1.1137 1.4848 1.8561 2.2273 2.5985 2.9697 3.3410 3.7122
23/32 0.4057 0.8115 1.2172 1.6220 1.0287 2.4344 2.8402 3.2459 3.6516 4.0574
24/32 0.4417 0.8835 1.3253 1.7671 2.2089 2.6507 3.0925 3.5342 3.9760 4.4178
25/32 0.4794 0.9587 1.4381 1.3175 1.0287 2.3968 2.8762 3.3560 4.3143 4.7937
26/32 0.5184 1.0369 1.5554 2.0739 2.5924 3.1109 3.6293 4.1478 4.6663 5.1848
27/32 0.5591 0.1183 1.6774 1.2365 1.7957 3.3548 3.9139 4.4731 5.0322 5.5914
28/32 0.6013 1.2026 1.8039 2.4052 3.0065 3.6079 4.2092 4.8015 5.4118 6.0131
29/32 0.6450 0.2901 1.9351 2.5802 3.2252 3.8702 4.5153 5.1603 5.8053 6.4504
30/32 0.6903 1.3806 2.0709 2.7612 3.4515 4.1417 4.8320 5.5223 6.2126 6.9021
48
Sandvik Mining Exploration
Bit Condition Analysis
49
Sandvik Mining Exploration
Sub-Optimal Wear Behaviour- Concave Face
50
Sandvik Mining Exploration
Sub-Optimal Wear Behaviour- Burnt Bit Face
ALERT! Be careful when restarting the drilling, if there are broken rock or cave-in at the
bottom of the hole proceed slowly and try to make the rock pieces move into the inner tube
rather than drilling the broken rock. Make sure that there is plenty of water passing the bit, be
careful with the feed pressure, and hold back on the rotation speed.
51
Sandvik Mining Exploration
Core Barrel System
Sandvik Core Barrel System
52
Sandvik Mining Exploration
53
Sandvik Mining Exploration
UNIQUE NSU COMPONENTS UNIQUE NSU COMPONENTS
1. Complete NSU head assembly 11. Spacer tube
2. Latch (2x) 12. Latch (2x)
3. Spring pin (2x) 13. Spring pin (2x)
4. LS spacer 14. LS spacer
5. Landing shoulder 15. Landing shoulder
6. Washer (2x) 16. Spacer (washer)
7. Shut off valve (2x) 17. Shut off valve (2x)
8. Spacer 18. Washer (2x)
9. Nut 19. Stabilising tube
10. Inner tube connection NSU 20. Spacer tube
21. Nut
22. Inner tube connection HSU
23. Spring pin
Items shown in grey are common components to both NSU and HSU. The items in colour are unique components
for each system.
54
Sandvik Mining Exploration
55
Sandvik Mining Exploration
MULTIFUNCTIONAL SYSTEM FOR BOTH
SURFACE AND UNDERGROUND APPLICATIONS WITH PATENTED iQ-FCV VALVE
PRODUCTIVITY AND INTELLIGENCE
The newly patented iQ-FCV valve provides and maintains a constant alert via sustained high water pressure, assuring the
operator that the inner tube assembly has positively latched into the core barrel, hence eliminating mislatches
Water efficiency – the iQ-FCV valve always retains the volume of water in the drill string, even in broken ground or dry
holes.
Simplified overshot attachment to Wireline no longer requires cable eyes or cable splicing, enabling easier maintenance
and repair in the field.
he new logic tip on the overshot allows for in-hole dry releasing of the inner tube assembly once the water level has been
reached, shortening the release time.
Pump-in overshot features a ball valve indicator which alerts the operator of positive latching onto the core barrel’s
back end.
DURABILITY AND SPEED
The stronger and smarter latching arrangement of the safety overshot to the back end eliminates the requirement of a
secondary safety sling.
The floating latches allow excessive drilling forces to be transferred to the main body and not onto the latch itself. A bypass
valve on the pump-in overshot coupled with wider openings in the back end allow for faster retrieval of inner tube.
COST-EFFICIENT
Multifunctional system for both surface and underground applications; no need for different coring tools
systems. coring tools systems.
A single core barrel back end for both standard and pump-in applications provides greater flexibility.
Net working capital is reduced due to fewer parts and spare parts inventory. Wear parts are minimized and the high
wearing landing shoulder can quickly and easily be interchanged.
SAFETY
The system is user-friendly and designed for safer handling.
The intelligent overshot (patented) is automatically latch-locking and latches can be released without the presence of
fingers in potentially high risk areas.
The back end is shorter and lighter, making it easier to handle, especially on smaller machines such as underground drills.
The knuckle joint featured on the overshot allows for ease of handling, especially in confined underground drilling spaces
.
The load-rated breakaway safety pins provide a safer way to release the overshot from stuck inner tubes.
56
Sandvik Mining Exploration
CORING AFTERMARKET
WIRELINE CORE BARREL
NSU/N2SU/N3SU
MULTIFUNCTIONAL SYSTEM FOR STANDARD AND PUMP-IN APPLICATIONS
57
Sandvik Mining Exploration
NSU Wireline Core Barrels
Item Part number Description
1-11 BF00008322 NSU core barrel assembly 1.5 m (5ft)
1-11 BF00008371 NSU core barrel assembly 3.0 m (10ft)
1-5 BF00008461 NSU inner tube assembly 1.5 m (5ft)
1-5 BF00008372 NSU inner tube assembly 3.0 m (10ft)
1 BF00007369 NSU/N3SU head assembly
1 6
NSU Inner Tube Components
Item Part number Description Qty
1 BF00007369 Head assembly NSU 1
2 BA00000148 Inner tube N/N3 1.5 m (5ft) 1
2 BA00000149 Inner tube N/N3 3.0 m (10ft) 1
3 BA00000120 Stop ring N 1
4 BA00000118 Core lifter N 1
7
5 BA00000154 Core lifter case N 1
- BB00001075 Inner tube wrench (full-grip) 2
Note: To convert your system to the Sandvik NSU Surface or Underground system
please order-
2 x Head assemblies
1 x Free fall overshot for surface drilling
1 x Pump in overshot for up hole drilling
1 x Survey tool
58
2 Sandvik Mining Exploration
NSU/N3SU Head Assembly
Item Part number Description Qty
1-35 BF00007369 Head Assembly NSU/N3SU 1
13 12 11 BF00007742 Pin 1
14 12 BF00008464 Spring 1
15
16 13 BF00007741 Release tube 1
14 BF00007097 Shaft 1
18 17
15 BF00008099 Valve body 1
19 16 BF00008100 Nut 1
17 BA00000139 Shut off valve - hard 2
20 18 BA00000153 Washer 2
21 23 19 BF00008317 Spacer 1
22 24 20 BF00001126 Thrust bearing 1
25 21 BF00001165 Ball bearing 1
26 22 BF00001101 Washer 1
27
28 29 23 BF00007137 Upper bearing housing 1
24 BF00001185 Compression spring 1
30
25 BF00000103 Bushing 1
26 BF00001125 Ball bearing 1
27 BF00001100 Washer 1
31
28 BF00001094 Nut locking 1
Note: To convert your system to the Sandvik NSU Surface or Underground system
please order-
2 x Head assemblies
1 x Free fall overshot for surface drilling
1 x Pump in overshot for up hole drilling
1 x Survey tool
59
Sandvik Mining Exportaion
N3SU Wireline Core Barrels
Item Part number Description
1-16 BF00008741 N3SU core barrel assembly 1.5 m (5ft)
1-16 BF00008742 N3SU core barrel assembly 3.0 m (10ft)
1-10 BF00008739 N3SU inner tube assembly 1.5 m (5ft)
1-10 BF00008740 N3SU inner tube assembly 3.0 m (10ft)
1 BF00007369 NSU/N3SU head assembly
13
NSU/N3SU Outer Tube Components
Item Part number Description Qty
5
11 BA00000156 Locking coupling - full hole 1
14
12 BA00000147 Adapter coupling 1
13 BA00000121 Landing ring 1
14 BA00000126 Outer tube 1.5 m (5 ft) 1
14 BA00000127 Outer tube 3.0 m (10 ft) 1
15 BA00000122 Inner tube stabilizer 1
10 15
6 Options to Standard Configuration
Item Part number Description
7 7 BF00004985 Core lifter - smooth
7 BF00005028 Core lifter - slotted
16
8 BF00008375 Basket core retainer N3
8
11 BB00000063 Locking coupling - full hole, tanged, N
11 BB00000064 Locking coupling - full hole, NT
11 BB00000065 Locking coupling - full hole, tanged NT
11 BF00004519 Locking coupling - full hole, NHD
11 BF00004520 Locking coupling - full hole, tanged NHD
14 BF00004538 Outer tube 1.5 m (5 ft) - chrome plated
14 BF00004539 Outer tube 3.0 m (10 ft) - chrome plated
14 BF00002334 Outer tube 1.5 m (5 ft) - full hole
14 BF00002331 Outer tube 3.0 m (10 ft) - full hole
14 BF00005283 Outer tube 3.0 m (10 ft) - chrome plated full hole
60
Sandvik Mining Exploration
NSU/N3SU Head Assembly
Item Part number Description Qty
1-35 BF00007369 Head assembly NSU/N3SU 1
13 12 11 BF00007742 Pin 1
14 12 BF00008464 Spring 1
15
16 13 BF00007741 Release tube 1
14 BF00007097 Shaft 1
18 17
15 BF00008099 Valve body 1
19 16 BF00008100 Nut 1
17 BA00000139 Shut off valve - hard 2
20 18 BA00000153 Washer 2
21 23 19 BF00008317 Spacer 1
22 24 20 BF00001126 Thrust bearing 1
25 21 BF00001165 Ball bearing 1
26 22 BF00001101 Washer 1
27
28 29 23 BF00007137 Upper bearing housing 1
24 BF00001185 Compression spring 1
30
25 BF00000103 Bushing 1
26 BF00001125 Ball bearing 1
27 BF00001100 Washer 1
31
28 BF00001094 Nut locking 1
Note: To convert your system to the Sandvik NSU Surface or Underground system
please order-
2 x Head assemblies
1 x Free fall overshot for surface drilling
1 x Pump in overshot for up hole drilling
1 x Survey tool
61
Sandvik Mining Exploration
N2SU Wireline Core Barrels
Item Part number Description
1-11 BF00008401 N2SU core barrel assembly 1.5 m (5ft)
1-11 BF00008402 N2SU core barrel assembly 3.0 m (10ft)
1-5 BF00008460 N2SU inner tube assembly 1.5 m (5ft)
1-5 BF00008403 N2SU inner tube assembly 3.0 m (10ft)
1 BF00008404 N2SU head assembly
1 6
N2SU Inner Tube Components
Item Part number Description Qty
1 BF00008404 Head assembly N2SU 1
2 BA00000218 Inner tube N2 1.5 m (5ft) 1
2 BA00000219 Inner tube N2 3.0 m (10ft) 1
3 BA00000215 Stop ring N2 1
4 BA00000217 Core lifter N2 1
7
5 BA00000216 Core lifter case N2 1
– BB00000325 Inner tube wrench 2
Note: To convert your system to the Sandvik NSU Surface or Underground system
please order-
2 x Head assemblies
1 x Free fall overshot for surface drilling
1 x Pump in overshot for up hole drilling
1 x Survey tool
62
Sandvik Mining Exploration
N2SU Head Assembly
Item Part number Description Qty
1-35 BF00008404 Head assembly N2SU 1
13 12 11 BF00007742 Pin 1
14 12 BF00008464 Spring 1
15
16 13 BF00007741 Release tube 1
14 BF00007097 Shaft 1
18 17
15 BF00008099 Valve body 1
19 16 BF00008100 Nut 1
17 BA00000139 Shut off valve - hard 2
20 18 BA00000153 Washer 2
21 23 19 BF00008317 Spacer 1
22 24 20 BF00001126 Thrust bearing 1
25 21 BF00001165 Ball bearing 1
26 22 BF00001101 Washer 1
27
28 29 23 BF00007137 Upper bearing housing 1
24 BF00001185 Compression spring 1
30
25 BF00000103 Bushing 1
26 BF00001125 Ball bearing 1
27 BF00001100 Washer 1
31
28 BF00001094 Nut locking 1
Note: To convert your system to the Sandvik NSU Surface or Underground system
please order-
2 x Head assemblies
1 x Free fall overshot for surface drilling
1 x Pump in overshot for up hole drilling
1 x Survey tool
63
Sandvik Mining Exploration
NSU/N2SU/N3SU Wireline Core Barrel Consumables Kit
1 Item Part number Description Qty
1-15 BF00008743 Consumables kit -
11 1 BF00001110 O-ring 2
2 BF00007125 Latch 4
2
3 BF00008318 Landing shoulder 2
4 BA00000139 Shut-off valve - hard 4
12
5 BF00001126 Thrust bearing 2
6 BF00001165 Ball bearing 2
3
7 BF00001125 Ball bearing 2
8 BF00001094 Nut locking 1
13 9 BF00001143 Grease fitting 2
4
10 BA00000132 Ball 1
11 BA00000120 Stop ring 5
12 BA00000118 Core lifter 20
64
Sandvik Mining Exploration
Pump-In NSU Overshot
1
Item Part number Description Qty
1-19 BG00481050 Overshot Assembly NSU, Pump-In
2
1 BG00482740 Wire Clamp 1
2 BG00489395 Set Screw 3
3
4 3 BG00488270 Bearing Shaft 1
5
6 4 BF00001182 Shear Pin 1
18
65
Sandvik Mining Exploration
Free Falling NSU Overshot
Item Part number Description Qty
1-13 BF00008400 Overshot assembly NSU, free falling –
1 1 BF00000237 Wire clamp 1
14
2 BF00001194 Set screw 3
2 17 3 BF00000238 Bearing shaft 1
15 4 BF00001182 Shear pin 1
3
16
4 17 5 BF00000231 Bearing housing 1
18
5
6 BF00001153 Spring pin 1
6 19 19
20 7 BF00008392 Wire weight 1
7
8 BF00000372 Screw 3
21
8 9 BF00003994 Wheel 3
9
10 BF00001154 Spring pin 1
11 BF00008559 Detent plunger 1
22 12 BF00001191 Compression spring 1
13 BF00007371 Logic tip assembly 1
23
14 BG00502961 Sleeve 1
15 BG00507346 Screw 2
24
8
Logic Tip Assembly
9
Item Part number Description Qty
14-24 BF00007371 Logic tip assembly 1
14 BF00008384 Lower link 1
15 BF00001146 Spring pin 1
16 BF00007197 Inner shaft 1
17 BF00008200 Steel ball 2
30 18 BF00008243 Detent spring 1
9
8 19 BF00007292 Screw 2
29
20 BF00007229 Outer tube 1
21 BF00007498 Compression spring 1
26
10 22 BF00007291 Screw (logic gate) 1
11 28
23 BF00007147 Lifting tip 1
12 27
24 BF00007128 Logic sleeve 1
27
28
66
Sandvik Mining Exploration
Seal Sub-Assembly NSU 4.4 Wire
Item Part number Description Qty
1-3 BF00008393 Seal assembly 4.4 wire (11/64’’) 1
1 BF00000194 Screw 4.4 (11/64’’) 1
2 BF00000097 Seal 4.4 (11/64’’) 1
3 BF00000191 Spacer 4.4 (11/64’’) 1
Note: To convert your system to the Sandvik NSU Surface or Underground system
please order-
2 x Head assemblies
1 x Free fall overshot for surface drilling
1 x Pump in overshot for up hole drilling
1 x Survey tool
67
Sandvik Mining Exploration
Wireline Survey Tool - NSU
Item Part number Description Qty
1-12 BG00481619 NSU Survey Tool Assembly 1
1 BG00481684 Thread Adaptor E Rod Pin 1
2 BF00008768 Spring Pin 1
3 BF00008719 Spacer 1
12
4 BF00008715 Bit Stopper N/N2/N3 1
10 5 BF00001185 Compression Spring 1
11 9
6 BG00485260 Latch Body 1
7 BG00485614 Sleeve 1
8 8 BG00486584 Rivet 1
9 BF00001145 Pin 2
7
10 BF00001150 Pin 2
6
11 BF00001110 O-ring 1
12 BF00007125 Latch 2
5
2
Note: To convert your system to the Sandvik NSU Surface or Underground system
1
please order-
2 x Head assemblies
© Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
1 x Free fall overshot for surface drilling
1 x Pump in overshot for up hole drilling
1 x Survey tool
13
14
68
MINING.SANDVIK.COM Sandvik Mining Exploration
CORING AFTERMARKET
WIRELINE CORE BARREL
HSU/H2SU/H3SU
MULTIFUNCTIONAL SYSTEM FOR STANDARD AND PUMP-IN APPLICATIONS
69
Sandvik Mining Exploration
HSU Wireline Core Barrels
Item Part number Description
1-11 BF00008357 HSU Core Barrel Assembly 1.5 m (5ft)
1-11 BF00008358 HSU Core Barrel Assembly 3.0 m (10ft)
1-5 BF00008359 HSU Inner Tube Assembly 1.5 m (5ft)
1-5 BF00008360 HSU Inner Tube Assembly 3.0 m (10ft)
1 BF00008308 HSU/H3SU Head Assembly
1 6
HSU Inner Tube Components
Item Part number Description Qty
1 BF00008308 Head Assembly HSU 1
2 BA00000174 Inner tube H/H3 1.5 m (5ft) 1
2 BA00000175 Inner tube H/H3 3.0 m (10ft) 1
3 BA00000185 Stop ring H 1
4 BA00000186 Core lifter H 1
7
5 BA00000188 Core lifter case H 1
- BB00001076 Inner tube wrench (full-grip) 2
Note: To convert your current system to the Sandvik HSU Surface or Underground
system please order-
2 x Head assemblies
1 x Free fall overshot for surface drilling
1 x Pump in overshot for up hole drilling
1 x Survey tool
1 x Adaptor coupling HSU
70
Sandvik Mining Exploration
HSU/H3SU Head Assembly
Item Part number Description Qty
1-40 BF00008308 Head Assembly HSU/H3SU 1
Note: To convert your current system to the Sandvik HSU Surface or Underground
system please order-
2 x Head assemblies
1 x Free fall overshot for surface drilling
1 x Pump in overshot for up hole drilling
1 x Survey tool
1 x Adaptor coupling HSU
71
Sandvik Mining Exploration
H3SU Wireline Core Barrels
Item Part number Description
1-16 BG00407449 H3SU Core Barrel Assembly 1.5 m (5ft)
1-16 BG00408701 H3SU Core Barrel Assembly 3.0 m (10ft)
1-10 BG00407345 H3SU Inner Tube Assembly 1.5 m (5ft)
1-10 BG00408704 H3SU Inner Tube Assembly 3.0 m (10ft)
1 BF00008308 HSU/H3SU Head Assembly
72
Sandvik Mining Exploration
HSU/H3SU Head Assembly
Item Part number Description Qty
1-40 BF00008308 Head Assembly HSU/H3SU 1
Note: To convert your current system to the Sandvik HSU Surface or Underground
system please order-
2 x Head assemblies
1 x Free fall overshot for surface drilling
1 x Pump in overshot for up hole drilling
1 x Survey tool
1 x Adaptor coupling HSU
73
Sandvik Mining Exploration
H2SU Wireline Core Barrels
Item Part number Description
1-11 BG00407267 H2SU Core Barrel Assembly 1.5 m (5ft)
1-11 BF00008369 H2SU Core Barrel Assembly 3.0 m (10ft)
1-5 BG00407273 H2SU Inner Tube Assembly 1.5 m (5ft)
1-5 BF00008370 H2SU Inner Tube Assembly 3.0 m (10ft)
1 BF00008366 H2SU Head Assembly
10
3 Options to Standard Configuration
Item Part number Description
4
6 BB00000067 Locking coupling - full hole, tanged, H
11 6 BB00000068 Locking coupling - full hole, HT
5 6 BB00000069 Locking coupling - full hole, tanged, HT
6 BF00003472 Locking coupling - full hole, HHD
6 BF00005229 Locking coupling - full hole, tanged HHD
9 BF00004540 Outer Tube 1.5 m (5 ft) - Chrome plated
9 BF00004541 Outer Tube 3.0 m (10 ft) - Chrome plated
9 BF00002335 Outer Tube 1.5 m (5 ft) - Full hole
9 BF00002332 Outer Tube 3.0 m (10 ft) - Full hole
9 BF00005306 Outer Tube 1.5 m (5 ft) - Chrome plated full hole
9 BF00005285 Outer Tube 3.0 m (10 ft) - Chrome plated full hole
9 BF00002334 Outer tube 1.5 m (5 ft) - full hole
9 BF00002331 Outer tube 3.0 m (10 ft) - full hole
9 BF00005283 Outer tube 3.0 m (10 ft) - chrome plated full hole
Note: To convert your current system to the Sandvik HSU Surface or Underground
system please order-
2 x Head assemblies
1 x Free fall overshot for surface drilling
1 x Pump in overshot for up hole drilling
1 x Survey tool
1 x Adaptor coupling HSU
74
Sandvik Mining Exploration
H2SU Head Assembly
Item Part number Description Qty
1-40 BF00008366 Head Assembly H2SU 1
Note: To convert your current system to the Sandvik HSU Surface or Underground
system please order-
2 x Head assemblies
1 x Free fall overshot for surface drilling
1 x Pump in overshot for up hole drilling
1 x Survey tool
1 x Adaptor coupling HSU
75
Sandvik Mining exploration
HSU Wireline Core Barrel Consumables Kit
1 Item Part number Description Qty
1-15 BG00551282 Consumables Kit -
11 1 BF00001110 O-ring 2
2 BF00007627 Latch 4
2
3 BF00008354 Landing shoulder 2
4 BA00000181 Shut-off valve - hard 4
12
5 BF00001126 Thrust bearing 2
6 BF00001165 Ball bearing 6204 2
3
7 BF00001125 Ball Bearing 6202 2
8 BF00001094 Nut Loc-King 1
13 9 BF00001143 Grease Fitting 1/8" 2
4
10 BA00000132 Ball 1
11 BF00008320 Stop ring 5
12 BA00000186 Core lifter 20
76
Sandvik Mining Exploration
Pump-In HSU Overshot
1
Item Part number Description Qty
1-19 BG00512214 Overshot Assembly HSU, Pump-In
2
1 BG00482740 Wire Clamp 1
2 BG00489395 Set Screw 3
3
4 3 BG00488270 Bearing Shaft 1
5
6 4 BF00001182 Shear Pin 1
18
77
Sandvik Mining Exploration
Free Falling HSU Overshot
Item Part number Description Qty
1-15 BF00008472 Overshot Assembly HSU, Free Falling
1 1 BF00000237 Wire Clamp 1
16
2 BF00001194 Set Screw 3
2 19 3 BF00000238 Bearing Shaft 1
17 4 BF00001182 Shear Pin 1
3
18
4 19 5 BF00000231 Bearing Housing 1
20
5
6 BF00001153 Spring Pin FRP 8x36 1
6 21 21
22 7 BF00008392 Wire Weight 1
7
8 BF00000372 Screw 3
23
9 9 BF00007761 Wheel 3
10 BF00001153 Spring Pin 1
11 BF00008559 Detent plunger 1
24 12 BF00001191 Compression Spring 1
13 BF00007371 Logic Tip Assembly 1
25
14 BG00502961 Sleeve 1
15 BG00507346 Screw 2
26
29
78
Sandvik Mining Exploration
Seal Sub-Assembly HSU 4.4 Wire
Item Part number Description Qty
1-3 BF00008393 Seal Assembly 4.4 Wire 1
1 BF00000194 Screw WL46/56/66/76/103/NSU 4.4 1
2 BF00000097 Seal WL46/56/66/76/103/NSU 4.4 Wire 1
3 BF00000191 Spacer WL46/56/66/76/103/NSU 4.4 1
Note: To convert your current system to the Sandvik HSU Surface or Underground
system please order-
2 x Head assemblies
1 x Free fall overshot for surface drilling
1 x Pump in overshot for up hole drilling
1 x Survey tool
1 x Adaptor coupling HSU
79
Sandvik Mining Exploration
Wireline Survey Tool - HSU
Item Part number Description Qty
1-12 BG00523136 Survey Tool HSU Assembly 1
1 BG00481684 Thread Adaptor E Rod Pin 1
2 BF00008768 Spring Pin 1
3 BF00008719 Spacer 1
12
4 BG00523139 Bit Stopper H/H2/H3 (Nylon) 1
10 5 BF00001185 Compression Spring 1
9
11 6 BG00485260 Latch Body 1
7 BG00485614 Sleeve 1
8 8 BG00486584 Rivet 1
9 BF00001145 Pin 2
7
10 BF00001150 Pin 2
6
11 BF00001110 O-ring 1
12 BF00007125 Latch 2
5
2
Note: To convert your current system to the Sandvik HSU Surface or Underground
1
system please order-
2 x Head assemblies
© Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
1 x Free fall overshot for surface drilling
1 x Pump in overshot for up hole drilling
1 x Survey tool
1 x Adaptor coupling HSU
13
14
MINING.SANDVIK.COM
80
Sandvik Mining Exploration
EXPLORATION CORING TOOLS
RP621 CASING
“W” AND “WT” THREADS
81
Sandvik Mining Exploration
METRIC LENGTH CASINGS
Part no Description Length ID OD Weight
m mm in mm in kg lb
“W” THREAD
BB00000176 Casing, BW 0.6 60.3 2.38 69.9 2.75 6.39 14.09
BB00000177 Casing, BW 1.5 60.3 2.38 69.9 2.75 15.98 35.23
BB00000178 Casing, BW 3.0 60.3 2.38 69.9 2.75 31.97 70.48
BB00000125 Casing, NW 0.6 76.2 3.0 88.9 3.50 7.81 17.22
BB00000126 Casing, NW 1.5 76.2 3.0 88.9 3.50 19.52 43.03
BB00000127 Casing, NW 3.0 76.2 3.0 88.9 3.50 39.04 86.07
BB00000570 Casing, HW 0.6 101.6 4.00 114.3 4.50 13.73 30.27
BB00000571 Casing, HW 1.5 101.6 4.00 114.3 4.50 27.46 60.54
BB00000124 Casing, HW 3.0 101.6 4.00 114.3 4.50 53.34 117.59
“WT” THREAD
BB00000179 Casing, HWT 0.6 101.6 4.00 114.3 4.50 13.73 30.27
BB00000180 Casing, HWT 1.5 101.6 4.00 114.3 4.50 27.46 60.54
BB00000181 Casing, HWT 3.0 101.6 4.00 114.3 4.50 53.34 117.59
BB00000182 Casing, PWT 0.6 127.0 5.00 139.7 5.50 16.91 37.28
BB00000183 Casing, PWT 1.5 127.0 5.00 139.7 5.50 33.82 74.56
BB00000184 Casing, PWT 3.0 127.0 5.00 139.7 5.50 65.69 144.82
Note: to get the maximum performance and life from your drill rod, it is
recommended that you do not mix Sandvik rods with rods or adapter subs
from other manufacturers;
Please refer to the adapter subpage for complete selection of Sandvik
Adapter subs.
Sandvik's anti-galling joint compound MUST be used on the inital make and
break of every rod - DO NOT REMOVE. Failure to comply can result in your
warrenty being cancelled.
Although the materials, process and thread design may appear similar,
dimensions and tolerances may vary between manufacturers !
83
Sandvik Mining Exploration
The Sandvik RP622 series of drill rod features the industry standard modified ACME
thread on the box and pin ends with the appropriate stand-off gap to ensure a tight
seal.
BB00000167 Drill Rod, B 0.6 m 46.1 1.81 55.6 2.19 3.60 7.94
BF00004027 Drill Rod, B 1.0 m 46.1 1.81 55.6 2.19 6.00 13.20
BB00000035 Drill Rod, B 1.5 m 46.1 1.81 55.6 2.19 9.00 19.84
BB00000037 Drill Rod, B 3.0 m 46.1 1.81 55.6 2.19 18.00 39.68
N = 2000 m (6500 ft) depth
BB00000168 Drill Rod, N 0.6 m 60.3 2.37 69.9 2.75 4.60 10.19
BF00008751 Drill Rod, N 1.0 m 60.3 2.37 69.9 2.75 7.80 17.20
BB00000038 Drill Rod, N 1.5 m 60.3 2.37 69.9 2.75 11.60 25.46
BB00000039 Drill Rod, N 3.0 m 60.3 2.37 69.9 2.75 23.10 50.93
BB00000169 Drill Rod, H 0.6 m 77.8 3.06 88.9 3.50 6.80 15.08
BF00008750 Drill Rod, H 1.0 m 77.8 3.06 88.9 3.50 11.40 25.10
BB00000040 Drill Rod, H 1.5 m 77.8 3.06 88.9 3.50 17.10 37.70
All ratings have been calculated and are
based on qualified drilling crews using
BB00000041 Drill Rod, H 3.0 m 77.8 3.06 88.9 3.50 34.20 75.40
high quality drilling tools in “normal”
ground conditions. These results can be
reasonably expected but no guarantee
is implied. NOTE: 0.6 m rod lengths are available on request, contact your Sandvik
For more specification see the wireline representative.
drill rod specification sheet.
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in
“normal” ground conditions. These results can be reasonably expected but no guarantee is implied. Sandvik
wireline drill rods require the use of Sandvik proprietary thread compound on initial make-up. * Box and pin
ends have not been quench and tempered. **Manufactured from variable wall material, measurements are only
representative of rod box/pin ends.
Note: to get the maximum performance and life from your drill rod, it is
recommended that you do not mix Sandvik rods with rods or adapter subs
from other manufacturers;
Please refer to the adapter subpage for complete selection of Sandvik
Adapter subs.
Sandvik's anti-galling joint compound MUST be used on the inital make and
break of every rod - DO NOT REMOVE. Failure to comply can result in your
warrenty being cancelled.
Although the materials, process and thread design may appear similar,
dimensions and tolerances may vary between manufacturers !
86
Sandvik Mining Exploration
The Sandvik RP623 series of drill rod features a robust, modified square profile thread
on the box and pin ends commonly referred to in the industry as “T”.
BB00000052 Drill Rod, BT 3,0 m 46,1 1.81 55,6 2.19 18,00 39.68
NT = 2000 m (6500 ft) depth
BB00000053 Drill Rod, NT 1,5 m 60,3 2.38 69,9 2.75 11,60 25.46
BB00000054 Drill Rod, NT 3,0 m 60,3 2.38 69,9 2.75 23,10 50.93
BB00000055 Drill Rod, HT 1,5 m 77,8 3.06 88,9 3.50 17,10 37.70
BB00000056 Drill Rod, HT 3,0 m 77,8 3.06 88,9 3.50 34,20 75.40
NOTE: 0.6 m rod lengths are available on request, contact your Sandvik
representative.
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in
“normal” ground conditions. These results can be reasonably expected but no guarantee is implied. Sandvik
wireline drill rods require the use of Sandvik proprietary thread compound on initial make-up. * Box and pin
ends have not been quench and tempered. **Manufactured from variable wall material, measurements are only
representative of rod box/pin ends.
Note: to get the maximum performance and life from your drill rod, it is
recommended that you do not mix Sandvik rods with rods or adapter subs
from other manufacturers;
Please refer to the adapter subpage for complete selection of Sandvik
Adapter subs.
Sandvik's anti-galling joint compound MUST be used on the inital make and
break of every rod - DO NOT REMOVE. Failure to comply can result in your
warrenty being cancelled.
Although the materials, process and thread design may appear similar,
dimensions and tolerances may vary between manufacturers !
89
Sandvik Mining Exploration
Sandvik RP625 rods feature an industry proven buttress thread form that has proven
mm in mm in kg lb
BF00004276 Drill Rod, NHD 0.6 m 60.3 2.37 69.9 2.75 4.60 10.19
NHD = 3000 m (10,000 ft) depth
BF00004162 Drill Rod, NHD 1.5 m 60.3 2.37 69.9 2.75 11.60 25.46
BF00002259 Drill Rod, NHD 3.0 m 60.3 2.37 69.9 2.75 23.10 50.93
BF00004278 Drill Rod, HHD 0.6 m 77.8 3.06 88.9 3.50 6.80 15.08
BF00004277 Drill Rod, HHD 1.5 m 77.8 3.06 88.9 3.50 17.10 37.70
BF00002263 Drill Rod, HHD 3.0 m 77.8 3.06 88.9 3.50 34.20 75.40
BB00000238 Drill Rod, PHD 1.5 m 101.6 4.00 114.3 4.50 25.40 55.89
BB00000239 Drill Rod, PHD 3.0 m 101.6 4.00 114.3 4.50 50.70 111.77
BB00000122 Drill Rod, SHD 1.5 m 126.6 5.00 139.7 5.50 31.40 69.11
All ratings have been calculated and are
based on qualified drilling crews using BB00000175 Drill Rod, SHD 3.0 m 126.6 5.00 139.7 5.50 62.70 138.23
high quality drilling tools in “normal”
ground conditions. These results can be
reasonably expected but no guarantee
is implied. NOTE: “P” 0.6 m heat treated drill rod is available as special order only, contact your
For more specification see the wireline
drill rod specification sheet. Sandvik representative. “S” wireline drill rods are manufactured with the same quality
grade materials but does not have heat treated box and pin ends.
Recommended Min Make-Up 600 Nm 443 lbf ft 1000 Nm 738 lbf ft 1,500 Nm 1,106 lbf ft 1,800 Nm 1,328 lbf ft
Torque
Recommended Min Make-Up 1,000 Nm 738 lbf ft 1400 Nm 1,003 lbf ft 1,800 Nm 1,328 lbf ft 2,100 Nm 1,549 lbf ft
Torque, over 1,000m
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in
“normal” ground conditions. These results can be reasonably expected but no guarantee is implied. Sandvik
wireline drill rods require the use of Sandvik proprietary thread compound on initial make-up. * Box and pin
ends have not been quench and tempered. **Manufactured from variable wall material, measurements are only
representative of rod box/pin ends.
Note: to get the maximum performance and life from your drill rod, it is
recommended that you do not mix Sandvik rods with rods or adapter subs
from other manufacturers;
Please refer to the adapter subpage for complete selection of Sandvik
Adapter subs.
Sandvik's anti-galling joint compound MUST be used on the inital make and
break of every rod - DO NOT REMOVE. Failure to comply can result in your
warrenty being cancelled.
Although the materials, process and thread design may appear similar,
dimensions and tolerances may vary between manufacturers !
92
Sandvik Mining Exploration
RP630 rods are maunfactured using variable wall material and feature an industry
proven buttress thread form that has proven itself time and again as a quality thread
that will meet all of your requirements for deep hole drilling applications.
BF00004613 Drill Rod, HHD-LW 3.0 m 77.8 3.06 88.9 3.50 27.00 59.52
BF00008079 Drill Rod, PHD-LW 3.0 m 101.6 4.00 114.3 4.50 36.00 79.37
Note: to get the maximum performance and life from your drill rod, it is
recommended that you do not mix Sandvik rods with rods or adapter subs
from other manufacturers;
Please refer to the adapter subpage for complete selection of Sandvik
Adapter subs.
Sandvik's anti-galling joint compound MUST be used on the inital make and
break of every rod - DO NOT REMOVE. Failure to comply can result in your
warrenty being cancelled.
Sandvik’s environmentally friendly anti-
galling thread compound is available for Although the materials, process and thread design may appear similar,
purchase, contact your representative
• 3.8 l container p/n BB00000241 dimensions and tolerances may vary between manufacturers !
• 20 l container p/n BB00000242
160 mm (6.3 in) safe rod clamp area Thru-wall induction hardened increasing joint strength
NHD-LW
HHD-LW
PHD-LW
310 mm (12.2 in) upset length Thru-wall induction hardened increasing joint strength
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in
“normal” ground conditions. These results can be reasonably expected but no guarantee is implied. Sandvik
wireline drill rods require the use of Sandvik proprietary thread compound on initial make-up. * Box and pin
ends have not been quench and tempered. **Manufactured from variable wall material, measurements are only
representative of rod box/pin ends.
Note: to get the maximum performance and life from your drill rod, it is
recommended that you do not mix Sandvik rods with rods or adapter subs
from other manufacturers;
Please refer to the adapter subpage for complete selection of Sandvik
Adapter subs.
Sandvik's anti-galling joint compound MUST be used on the inital make and
break of every rod - DO NOT REMOVE. Failure to comply can result in your
warrenty being cancelled.
Although the materials, process and thread design may appear similar,
dimensions and tolerances may vary between manufacturers !
95
Sandvik Mining Exploration
Sandvik RP635 rods are maunfactured using variable wall material and features the
industry standard modified ACME thread on the box and pin ends with the appropriate
stand-off gap to ensure a tight seal.
mm in mm in kg lb
BF00006460 Drill Rod, N-LW 3.0 m 60.3 2.37 69.9 2.75 20.40 44.97
N-LW = 2400 m (7874) depth
BF00006462 Drill Rod, H-LW 3.0 m 77.8 3.06 88.9 3.50 27.00 59.52
Note: to get the maximum performance and life from your drill rod, it is
recommended that you do not mix Sandvik rods with rods or adapter subs
from other manufacturers;
Please refer to the adapter subpage for complete selection of Sandvik
Adapter subs.
Sandvik's anti-galling joint compound MUST be used on the inital make and
break of every rod - DO NOT REMOVE. Failure to comply can result in your
warrenty being cancelled.
Although the materials, process and thread design may appear similar,
dimensions and tolerances may vary between manufacturers !
Sandvik’s environmentally friendly anti-
galling thread compound is available for
purchase, contact your representative
• 3.8 l container p/n BB00000241
• 20 l container p/n BB00000242
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in
“normal” ground conditions. These results can be reasonably expected but no guarantee is implied. Sandvik
wireline drill rods require the use of Sandvik proprietary thread compound on initial make-up. * Box and pin
ends have not been quench and tempered. **Manufactured from variable wall material, measurements are only
representative of rod box/pin ends.
• Material specification
• Heat treatment (full length of rod for increased
yield strength of thinner wall for thin kerf TK56,
thin kerf TK66 and thin kerf TK76)
• Machining
Sandvik recommends using only Sandvik quality manufactured
parts. Sandvik does not guarantee the consistency or quality of
Contact your Sandvik representative today. other manufacturers.
The RP662 series of drill rod features the a modified “T” thread on the box and pin ends with the appropriate
stand-off gap to ensure a tight seal.
BF00000894 Drill Rod, TK46 3.0 m 35.2 1.39 43.2 1.70 11.5 25.4
BF00000915 Drill Rod, TK76 0.75 m 64.4 2.54 73.2 2.88 5.6 12.4
1,300 m / 4,250 ft BF00000916 Drill Rod, TK76 1.5 m 64.4 2.54 73.2 2.88 11.1 24.5
BF00000912 Drill Rod, TK76 3.0 m 64.4 2.54 73.2 2.88 22.2 48.9
BF00001241 Drill Rod, TK56 3.0 m 46.0 1.81 53.2 2.09 11.3 24.9
TK65
1,350 m / 4,450 ft BF00001885 Drill Rod, TK66 0.75 m 57.0 2.24 63.9 2.52 3.8 8.4
1,500 m / 5,000 ft BF00001886 Drill Rod, TK66 1.5 m 57.0 2.24 63.9 2.52 7.7 17.0
BF00001887 Drill Rod, TK66 3.0 m 57.0 2.24 63.9 2.52 15.3 33.7
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in “normal” ground conditions.
These results can be reasonably expected but no guarantee is implied. For more specification see the wireline drill rod specification sheet.
98
Sandvik Mining Exploration
Note: to get the maximum performance and life from your drill rod, it is recommended that
you do not mix Sandvik rods with rods or adapter subs from other manufacturers;
Please refer to the adapter subpage for complete selection of Sandvik Adapter subs.
Sandvik's anti-galling joint compound MUST be used on the inital make and break of every
rod - DO NOT REMOVE. Failure to comply can result in your warrenty being cancelled.
Although the materials, process and thread design may appear similar, dimensions and
tolerances may vary between manufacturers !
TS1-002:01/ENG © Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
ROD BUNDLE DETAIL
Bundle #of rods Length Width Height Weight Qty per container
m ft mm in mm in kg lb Bundles Weight (kg)
BF00001239 19 0.83 2.72 278 10.94 205 9.84 76 167.5 300 22800
BF00001240 19 1.58 5.18 278 10.94 250 9.84 145 319.7 150 21750
BF00001241 19 3.08 10.1 278 10.94 250 9.84 257 566.6 92 23644
BF00001885 19 0.83 2.72 333 13.11 298 11.73 80 176.4 288 23040
BF00001886 19 1.58 5.18 333 13.11 298 11.73 152 335.1 144 21888
BF00001887 19 3.08 10.1 333 13.11 298 11.73 299 659.2 72 21528
Sandvik Mining reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a
Sandvik representative for clarification on specifications and options.
MINING.SANDVIK.COM
99
Sandvik Mining Exploration
EXPLORATION CORING TOOLS
WIRE LINE CORE BARREL
B CAM LATCH
CAM LATCH SYSTEM
100
Sandvik Mining Exploration
B WIRELINE CORE BARRELS
Item Part No Description
1-11 BF00003263 B core barrel assembly 1.5 m (5 ft)
1-11 BF00003264 B core barrel assembly 3.0 m (10 ft)
1-5 BF00003278 B inner tube assembly 1.5 m (5 ft)
6 1-5 BF00003279 B inner tube assembly 3.0 m (10 ft)
1 BB00001400 B head assembly
2
B WIRELINE SYSTEMS
101
Sandvik Mining Exploration
B WIRELINE CORE BARRELS
Item Part No Description
1-25 BB00001400 B head assembly
1
B HEAD COMPONENTS
2
Item Part No Description Qty
3 1 BA00000137 Spearhead point 1
18
22
21
23
24
25
B WIRELINE SYSTEMS
102
Sandvik Mining Exploration
B WIRELINE CORE BARREL CONSUMABLE KITS
Item Description B Qty
- Consumables kit BF00004340 -
1 Spearhead point BA00000137 1
1 2 Compression spring BA00000179 2
3 Detent plunger BA00000161 1
4 4 Coiled spring pin BA00000165 2
2 5 Spring pin BA00000276 4
6 Latch spring BB00000888 2
3
7 Latch BB00000665 4
5
8 Coiled spring BA00000274 4
9 Stainless steel ball BA00000132 1
7
10 Bushing BA00000131 4
6 11 Landing shoulder BB00001387 2
12 Nord-lock washer BA00000442 1
8
13 Lock nut BA00000283 1
9
14 Shut off valve (hard) BA00000337 4
10 15 Bearing BA00000311 2
16 Spindle bushing BA00000288 1
11
17 Self locking nut BA00000290 2
12 18 Hydraulic grease fitting BA00000134 2
19 Stop ring BA00000293 5
13
20 Core lifter BA00000306 20
14 21 Core lifter case BA00000294 5
22 Landing ring BA00000295 2
15
23 Inner tube stabilizer BA00000300 4
16
17
To ensure you have the consumable parts available when you
need them, Sandvik has developed a consumables kit for our
18
wireline core barrels based on the average usage for 1000 m of
19
drilling.
20
21
22
23
NOTE: The overshot is shipped with the release sleeve (item 11)
attached to the assembly with the set screw (item 14), these
must be removed prior to normal operation.
A safety pin (item 19) is included with the overshot assembly and
9 can be used when handling the inner tube assembly out of the
hole. When inserted into the overshot head, it helps to prevent
10
the lifting dogs from releasing the spearhead point.
11
12
13
14
15
16
17
18
19
20
1 2 3 4
5 6
Patent pending.
7 9 BB00000665 Latch 2
10 BF00004071 Coiled spring pin 3/8" x 1-1/4" 1
11 BB00001385 Upper latch body 1
12 BB00001387 Landing shoulder 1
13 BA00000132 Stainless steel ball, 22 mm (not shown) 1
14 BA00000131 Bushing (not shown) 1
8
15 BB00001386 Lower latch body 1
12
15
107
Sandvik Mining Exploration
N WIRELINE CORE BARRELS
Item Part No Description
1-11 BB00001047 N core barrel assembly 1.5 m (5 ft)
1-11 BB00001048 N core barrel assembly 3.0 m (10 ft)
1-5 BB00001046 N inner tube assembly 1.5 m (5 ft)
6 1-5 BB00001049 N inner tube assembly 3.0 m (10 ft)
1 BB00001045 N/N3 head assembly
2
N WIRELINE SYSTEMS
108
Sandvik Mining Exploration
N/N3 WIRELINE CORE BARRELS
Item Part No Description
1-26 BB00001045 N/N3 head assembly
15
21 BA00000163 Bearing 1
22 BA00000146 Spindle bushing 1
23 BA00000164 Bearing 1
16 24 BA00000123 Compression spring 1
17 25 BA00000158 Self locking nut 1
26 BA00000314 Inner tube cap assembly 1
18
19
20 OPTIONS TO STANDARD CONFIGURATION
19
20 Item Part No Description Qty
14 BF00004543 Bushing - for deep holes -
21
19 BA00000138 Shut off valve, soft -
22
23
24
25
26
14
N/N3 OUTER TUBE COMPONENTS
Item Part No Description Qty
11 BA00000156 Locking coupling - full hole 1
5
12 BA00000147 Adapter coupling 1
13 BA00000121 Landing ring 1
14 BA00000126 Outer tube 1.5 m (5 ft) 1
14 BA00000127 Outer tube 3.0 m (10 ft) 1
15 BA00000122 Inner tube stabilizer 1
16 BA00000268 Thread protector 1
- BB000001076 Outer tube wrench 2
N WIRELINE SYSTEMS
110
Sandvik Mining Exploration
N/N3 WIRELINE CORE BARRELS
Item Part No Description
1-26 BB00001045 N/N3 Head Assembly
18
22
23
24
25
26
N2 HEAD COMPONENTS
2
Item Part No Description Qty
3 1 BA00000137 Spearhead point 1
4 2 BA00000179 Compression spring 1
3 BA00000161 Detent plunger 1
5
4 BA00000165 Coiled spring pin 7/16" x 1" 1
6 5 BB00000146 Spearhead base 1
7 6 BB00000147 Latch retracting case 1
7 BA00000159 Spring pin 1/2" x 2" 2
8 BB00000777 Latch spring 1
9 BB00000666 Latch 2
8 10 BB00001059 Coiled spring pin 1/2" x 1-1/2" 1
11 BB00000148 Upper latch body 1
9 12 BB00000589 Landing shoulder 1
19
20 OPTIONS TO STANDARD CONFIGURATION
19
20 Item Part No Description Qty
14 BF00004543 Bushing - for deep holes -
21
19 BA00000138 Shut off valve, soft -
22
23
24
25
26
N WIRELINE SYSTEMS
113
Sandvik Mining Exploration
N/N2/N3 WIRELINE CORE BARREL CONSUMABLE KITS
Item Description N N2 N3 Qty
1 - Consumables kit BB00001028 BB00001029 BB00001030 -
1 Spearhead point BA00000137 BA00000137 BA00000137 1
2 Compression spring BA00000179 BA00000179 BA00000179 2
4
2 3 Detent plunger BA00000161 BA00000161 BA00000161 1
4 Coiled spring pin BA00000165 BA00000165 BA00000165 2
3
5 Spring pin BA00000159 BA00000159 BA00000159 4
5 6 Latch spring BB00000777 BB00000777 BB00000777 2
7 Latch BB00000666 BB00000666 BB00000666 4
7 8 Coiled spring BB00001059 BB00001059 BB00001059 4
9 Stainless steel ball BA00000132 BA00000132 BA00000132 1
6
10 Bushing BA00000131 BA00000131 BA00000131 4
8 11 Landing shoulder BB00000149 BB00000589 BB00000149 2
9 12 Nord-lock washer BA00000441 BA00000441 BA00000441 1
18 To ensure you have the consumable parts available when you need them,
19 Sandvik has developed a consumables kit for our wireline core barrels based on
20 the average usage for 1000 m of drilling.
21
22
23
24
25
A safety pin (item 19) is included with the overshot assembly and
can be used when handling the inner tube assembly out of the
hole. When inserted into the overshot head, it helps to prevent
9
the lifting dogs from releasing the spearhead point.
10
11
12
13
14
15
16
17
18
19
20
1 2 3 4
5 6
Patent pending.
N WIRELINE SYSTEMS
116
Sandvik Mining Exploration
SPRING LATCH TO CAM LATCH SYSTEM - N/N3
Item Part No Description Qty
1
1-15 BB00001072 Conversion Assembly -
1 BA00000137 Spearhead Point 1
2 BA00000179 Compression Spring (not shown) 1
3 3 BA00000161 Detent Plunger 1
N WIRELINE SYSTEMS
117
Sandvik Mining Exploration
EXPLORATION CORING TOOLS
WIRE LINE CORE BARREL
H/H3 CAM LATCH
CAM LATCH SYSTEM
118
Sandvik Mining Exploration
H WIRELINE CORE BARRELS
Item Part No Description
1-11 BF00003267 H core barrel assembly 1.5 m (5 ft)
1-11 BB00001042 H core barrel assembly 3.0 m (10 ft)
1-5 BF00003286 H inner tube assembly 1.5 m (5 ft)
6 1-5 BF00003287 H inner tube assembly 3.0 m (10 ft)
1 BB00001190 H/H3 head assembly
2
H WIRELINE SYSTEMS
119
Sandvik Mining Exploration
H/H3 WIRELINE CORE BARRELS
Item Part No Description
1-26 BB00001190 H/H3 head assembly
13
19 BA00000181 Shut off valve - hard 2
20 BA00000171 Valve adjusting washer 2
14
21 BA00000211 Bearing 2
15 22 BA00000190 Spindle bushing 1
23 BA00000163 Bearing 1
24 BA00000166 Compression spring 1
16
25 BA00000212 Self locking nut 1
17 26 BA00000317 Inner tube cap assembly 1
18
19
20 OPTIONS TO STANDARD CONFIGURATION
19 Item Part No Description Qty
20
14 BF00004544 Bushing - for deep holes -
21
19 BA00000180 Shut off valve, soft -
22
23
24
25
26
H WIRELINE SYSTEMS
120
Sandvik Mining Exploration
H3 WIRELINE CORE BARRELS
Item Part No Description
2 1-16 BF00003268 H3 core barrel assembly 1.5 M (5 ft)
1-16 BB00001043 H3 core barrel assembly 3.0 M (10 ft)
3
1-10 BF00003288 H3 inner tube assembly 1.5 M (5 ft)
11
1-10 BF00003289 H3 inner tube assembly 3.0 M (10 ft)
4
1 BB00001190 H/H3 head assembly
H WIRELINE SYSTEMS
121
Sandvik Mining Exploration
H/H3 WIRELINE CORE BARRELS
Item Part No Description
1-26 BB00001190 H/H3 head assembly
13
19 BA00000181 Shut off valve - hard 2
20 BA00000171 Valve adjusting washer 2
14
21 BA00000211 Bearing 2
15 22 BA00000190 Spindle bushing 1
23 BA00000163 Bearing 1
24 BA00000166 Compression spring 1
16
25 BA00000212 Self locking nut 1
17 26 BA00000317 Inner tube cap assembly 1
18
19
20 OPTIONS TO STANDARD CONFIGURATION
19 Item Part No Description Qty
20
14 BF00004544 Bushing - for deep holes -
21
19 BA00000180 Shut off valve, soft -
22
23
24
25
26
H WIRELINE SYSTEMS
122
Sandvik Mining Exploration
H/H3 WIRELINE CORE BARREL CONSUMABLE KITS
Item Description H H3 Qty
1 - Consumables kit BB00001192 BB00001193 -
1 Spearhead point BA00000137 BA00000137 1
2 Compression spring BA00000179 BA00000179 2
4
2 3 Detent plunger BA00000161 BA00000161 1
4 Coiled spring pin BA00000165 BA00000165 2
3
5 Spring pin BA00000177 BA00000177 4
5 6 Latch spring BB00000777 BB00000777 2
7 Latch BB00000667 BB00000667 4
7 8 Coiled spring BB00001060 BB00001060 4
9 Stainless steel ball BA00000132 BA00000132 1
6
10 Bushing BA00000131 BA00000131 4
8 11 Landing shoulder BB00001212 BB00001212 2
9 12 Nord-lock washer BA00000332 BA00000332 1
18 To ensure you have the consumable parts available when you need them,
19 Sandvik has developed a consumables kit for our wireline core barrels
20 based on the average usage for 1000 m of drilling.
21
22
23
24
25
H WIRELINE SYSTEMS
123
Sandvik Mining Exploration
H Compact Wireline Overshot
Item Part No Description Qty
1 1-20 BB00000102 Overshot Assembly -
2
1 BA00000349 Wire Rope Thimble 1
3
4
2 BA00000346 Eye Bolt 1
5 3 BA00000343 Cable Swivel Collar 1
6
4 BA00000352 Bearing 1
7 5 BA00000353 Castle Nut 1
6 BA00000356 Cotter Pin 1
8 7 BA00000134 Grease Fitting 1
8 BA00000366 Cable Swivel Body 1
9 BB00000090 Jar Staff 1
10 BB00000091 Jar Tube 1
11 BA00000362 Release Sleeve 1
12 BB00000095 Nord-lock Washer 1
13 BB00000094 Hex Nut 1
14 BA00000344 Set Screw, 3/8 UNF x 3/4 Nyloc 1
15 BA00000348 Compression Spring 1
16 BA00000515 Lifting Dog 2
17 BB00000164 Pin 1/2" x 2-1/8" 1
18 BB00000165 Spring Pin 1/4" x 2" 1
19 BF00002327 Safety Pin 1
20 BB00000163 Overshot Head 1
NOTE: The overshot is shipped with the release sleeve (item 11)
attached to the assembly with the set screw (item 14), these
must be removed prior to normal operation.
A safety pin (item 19) is included with the overshot assembly and
can be used when handling the inner tube assembly out of the
9
hole. When inserted into the overshot head, it helps to prevent
10 the lifting dogs from releasing the spearhead point.
11
12
13
14
15
16
17
18
19
20
H WIRELINE SYSTEMS
124
Sandvik Mining Exploration
To have you up and running with the new industry LINK LATCH TO CAM LATCH SYSTEM - H/H3
standard, Sandvik has put together an all inclusive kit Item Part No Description Qty
to ensure your conversion is made easy. - BB00001194 Conversion Kit -
1 BB00000777 Latch Spring 1
Steps outlining the conversion from link latch to cam 2 BB00000667 Latch 2
latch: 3 BB00001060 Coiled Spring Pin 1/2" x 2" 1
1. Remove link latch components as indicated in 4 BA00000177 Spring Pin 1/2" x 2-3/4" 2
green 5 BB00000234 Drift Pin (for Spring Pin) 1
2. Reinstall the spearhead and retraction case 6 BB00000235 Drift Pin (for Coiled Spring Pin) 1
components 7 BB00001031 Instruction Card (not shown) 1
3. Place the latch spring in the spring pocket
between the two latches NOTE: It is recommend that while upgrading, the spring
4. Keeping these three items together, insert them pin should be replaced with the coiled spring pin
into the upper latch body through the window in included in this kit (item #3).
the retraction case
5. Pull up the retraction case to install the new coiled Recommended Tools:
spring pin • Hammer
Drift Tool
6. Release the retraction case and fold in the latches • Rachet and 9/16 in
to reinstall the spring pin socket (14 mm)
• 4 in (100 mm)
For detailed step by step instructions and your socket extension
conversion kit, contact your Sandvik representative
today.
1 2 3 4
5 6
Patent pending.
H WIRELINE SYSTEMS
125
Sandvik Mining Exploration
SPRING LATCH TO CAM LATCH SYSTEM - H/H3
Item Part No Description Qty
1
1-15 BB00001195 Conversion Assembly -
2 1 BA00000137 Spearhead Point 1
3
2 BA00000179 Compression Spring 1
12
15
H WIRELINE SYSTEMS
126
Sandvik Mining Exploration
EXPLORATION CORING TOOLS
WIRE LINE CORE BARREL
P/P3 LW CAM LATCH
LIGHT WEIGHT CORE BARREL FEATURING CAM LATCH SYSTEM
127
Sandvik Mining Exploration
P-LW WIRELINE CORE BARRELS
Item Part No Description
1-11 BF00003269 P-LW core barrel assembly 1.5 m (5 ft)
1-11 BF00003270 P-LW core barrel assembly 3.0 m (10 ft)
1-5 BF00003290 P-LW inner tube assembly 1.5 m (5 ft)
6 1-5 BF00003291 P-LW inner tube assembly 3.0 m (10 ft)
1 BF00002275 P-LW/P3-LW head assembly
2
10
EXTENDED CORE BARRELS
P WIRELINE SYSTEMS
128
Sandvik Mining Exploration
P-LW/P3-LW WIRELINE CORE BARRELS
Item Part No Description
1-28 BF00002275 P-LW/P3-LW head assembly
1
P-LW/P3-LW HEAD COMPONENTS
Item Part No Description Qty
2
1 BA00000137 Spearhead point 1
3
2 BA00000179 Compression spring 1
4 3 BA00000161 Detent plunger 1
4 BA00000165 Coiled spring pin 7/16" x 1" 1
5
5 BB00001202 Spearhead base 1
6
6 BB00001189 Latch retracting case 1
7 7 BA00000177 Spring pin 1/2" x 2-3/4" 2
8 BB00000777 Latch spring 1
8
9 BB00000668 Latch 2
10 BB00001060 Coiled spring pin 1/2" x 2" 1
11 BB00001185 Upper latch body 1
9 12 BB00001234 Landing shoulder 1
13 BA00000132 Stainless steel ball 1
10
14 BA00000131 Bushing 1
11 15 BB00001235 Lower latch body 1
16 BF00003257 Nord-lock washer 1
12
17 BF00003261 Lock nut 1
18 BF00002484 Spindle 1
13
19 BF00002469 Shut off valve - hard 2
14 20 BF00002470 Valve adjusting washer 2
15 21 BA00000211 Bearing 3
22 BF00002478 Spindle bushing 1
16
23 BF00002479 Tapered washer 1
17
24 BA00000134 Grease fitting 1
18 25 BF00005537 Compression spring 1
19
26 BF00005694 Washer
20
19 27 BF00003262 Self locking nut 1
23 20 28 BF00002529 Inner tube cap assembly 1
21
24
OPTIONS TO STANDARD CONFIGURATION
22 Item Part No Description Qty
19 BF00006318 Shut off valve, soft -
25
26
27
28
P WIRELINE SYSTEMS
129
Sandvik Mining Exploration
P3-LW WIRELINE CORE BARRELS
Item Part No Description
2 1-16 BF00003271 P3-LW core barrel assembly 1.5 M (5 ft)
1-16 BF00003272 P3-LW core barrel assembly 3.0 M (10 ft)
3
1-10 BF00003292 P3-LW inner tube assembly 1.5 M (5 ft)
11
1-10 BF00003293 P3-LW inner tube assembly 3.0 M (10 ft)
4
1 BF00002275 P-LW/P3-LW head assembly
8
EXTENDED CORE BARRELS
Item Part No Description
- BF00008871 Outer tube coupling (for 6 m barrels)
- BF00008870 Inner tube coupling (for 6 m barrels)
- BF00008872 Piston extender (for 6 m barrels)
P WIRELINE SYSTEMS
130
Sandvik Mining Exploration
P-LW/P3-LW WIRELINE CORE BARRELS
Item Part No Description
1-26 BF00002275 P-LW/P3-LW head assembly
25
26
27
28
10
13 Lock nut BF00003261 BF00003261 1
14 Shut off valve BF00002469 BF00002469 4
11 15 Bearing BA00000211 BA00000211 3
16 Spindle bushing BF00002478 BF00002478 1
12
17 Self locking nut BF00003262 BF00003262 2
To ensure you have the consumable parts available when you need
17 them, Sandvik has developed a consumables kit for our wireline core
18
barrels based on the average usage for 1000 m of drilling.
19
20
21
22
23
24
NOTE: The overshot is shipped with the release sleeve (item 12)
attached to the assembly with the set screw (item 15), these
must be removed prior to normal operation.
A safety pin (item 21) is included with the overshot assembly and
can be used when handling the inner tube assembly out of the
hole. When inserted into the overshot head, it helps to prevent
9
the lifting dogs from releasing the spearhead point.
10
11
12
13
14
15
16
17
18
19
20
21
P WIRELINE SYSTEMS
133
Sandvik Mining Exploration
To have you up and running with the new industry LINK LATCH TO CAM LATCH SYSTEM - P-LW/P3-LW
standard, Sandvik has put together an all inclusive kit Item Part No Description Qty
to ensure your conversion is made easy. - BF00006049 Conversion Kit -
1 BB00000777 Latch Spring 1
Steps outlining the conversion from link latch to cam 2 BB00000668 Latch 2
latch: 3 BB00001060 Coiled Spring Pin 1/2" x 2" 1
1. Remove link latch components as indicated in 4 BA00000177 Spring Pin 1/2" x 2-3/4" 2
green 5 BB00000234 Drift Pin (for Spring Pin) 1
2. Reinstall the spearhead and retraction case 6 BB00000235 Drift Pin (for Coiled Spring Pin) 1
components 7 BB00001031 Instruction Card (not shown) 1
3. Place the latch spring in the spring pocket
between the two latches NOTE: It is recommend that while upgrading, the spring
4. Keeping these three items together, insert them pin should be replaced with the coiled spring pin
into the upper latch body through the window in included in this kit (item #3).
the retraction case
5. Pull up the retraction case to install the new coiled Recommended Tools:
spring pin • Hammer
Drift Tool
6. Release the retraction case and fold in the latches • Ratchet and 9/16”
to reinstall the spring pin socket (14 mm)
• 4” (100 mm) socket
For detailed step by step instructions and your extension
conversion kit, contact your Sandvik representative
today.
1 2 3 4
5 6
A
A
NOTE: An upper latch body (p/n BB00001185) may be required if using a newer version of the link latch core A
barrel — see illustration above for correct upper latch body to be used with Sandvik’s cam latch system.
P WIRELINE SYSTEMS
134
Sandvik Mining Exploration
SPRING LATCH TO CAM LATCH SYSTEM - P/P3
Item Part No Description Qty
1-15 BF00006048 Conversion Assembly -
1 1 BA00000137 Spearhead point 1
2 BA00000179 Compression spring 1
2
3 BA00000161 Detent plunger 1
3
4 BA00000165 Coiled spring pin 7/16" x 1" 1
4
5 BB00001202 Spearhead base 1
6 BB00001189 Latch retracting case 1
5 7 BA00000177 Spring pin 1/2" x 2-3/4" 2
8 BB00000777 Latch spring 1
6
9 BB00000668 Latch 2
10 BB00001060 Coiled spring pin 1/2" x 2" 1
7
11 BB00001185 Upper latch body 1
12 BB00001234 Landing Shoulder 1
13 BA00000132 Stainless steel ball, 22 mm (not shown) 1
8
14 BA00000131 Bushing (not shown) 1
15 BB00001235 Lower latch body 1
11
12
15
P WIRELINE SYSTEMS
135
Sandvik Mining Exploration
Exploration Coring Tools
ADAPTER SUBS
MULTIFUNCTIONAL SYSTEM FOR STANDARD AND PUMP-IN APPLICATIONS
• Material specification
• Heat treatment of wireline pin treads for increased
durability
• Machining
Note: to get the maximum performance and life from your drill rod, it is recommended that
you do not mix Sandvik rods with rods or adapter subs from other manufacturers;
Please refer to the adapter subpage for complete selection of Sandvik Adapter subs.
Sandvik's anti-galling joint compound MUST be used on the inital make and break of every
rod - DO NOT REMOVE. Failure to comply can result in your warrenty being cancelled.
Although the materials, process and thread design may appear similar, dimensions and
tolerances may vary between manufacturers !
136
Sandvik Mining Exploration
Water Swivel/Hoisting Plug
B SYSTEMS
Part No Pin End Pin End
BB00000111 AW rod B w/l rod
BB00000229 AW rod BT rod
BB00000897 AW rod BW casing
BA00001650 BW rod B w/l rod
BB00000230 BW rod BT rod
N SYSTEMS
BA00001651 NW rod B rod
BB00000233 NW rod BT rod
Rod/Casing
Part No Box End Pin End
BB00000186 B w/l rod BW casing
H SYSTEMS
BA00001655 B w/l rod BT rod
BB00000115 B w/l rod N w/l rod
BA00001652 BT rod BW casing
BF00000968 BT rod B w/l rod
BF00004879 N w/l rod B w/l rod
BB00000772 NW casing B w/l rod
P SYSTEMS
Saver Sub
Part No Pin End Box End
BF00007347 B w/l rod B w/l rod
BB00000236 BT rod BT rod
BLANKS
Part No Pin End Pin End
BF00006639 NW rod B w/l rod
BF00006812 NW rod BT rod
Starter Rod
Part No Box End Box End Length
BA00001745 NW rod 3-1/2 API IF 450
BA00001748 NW rod 3-1/2 API IF 730
B SYSTEMS
Part No Pin End Pin End Part No Box End Box End Length
BB00000106 AW rod N w/l rod BA00001745 NW rod 3-1/2 API IF 450
BB00000330 AW rod NT rod BA00001748 NW rod 3-1/2 API IF 730
BF00007236 AW rod NHD rod BU00018256 N rod 3-1/2 API 730
BB00000114 AW rod NW casing BU00019975 NT rod 3-1/2 API 730
BB00000116 BW rod N w/l rod BU00018258 NHD rod 3-1/2 API 730
N SYSTEMS
BB00000331 BW rod NT rod BU00019977 NW casing 3-1/2 API 730
BF00004496 BW rod NHD rod !
BB00000881 BW rod NW casing
BB00000117 NW rod N w/l rod Recovery Tool to Rod/Casing
BB00000332 NW rod NT rod Part No Box End Pin End
BF00004497 NW rod NHD rod ! BB00000109 N w/l rod BW rod
BB00000110 N w/l rod NW rod
H SYSTEMS
BF00004740 NT w/l rod BW rod
Rod/Casing BF00004742 NT rod NW rod
Part No Box End Pin End BF00004499 NHD rod NW rod
BF00004879 N w/l rod B w/l rod BF00004498 NHD rod BW rod
BA00001658 N w/l rod NT rod
BF00002325 N w/l rod NHD rod !
BB00000752 N w/l rod H w/l rod Bullnose adapter sub
P SYSTEMS
BB00000107 N w/l rod NW casing Part No Pin End Pin End
BB00000187 N w/l rod HW casing BB00001069 N pin bullnose NW rod
BB00000108 N w/l rod PHD rod
/HWT casing ! ! NHD adapter subs are now available for use with
BA00001659 NT rod N w/l rod Sandvik’s RP625 and RP630 wireline drill rods. They
BF00004051 NT rod NW casing are easily identified with two grooves.
BF00002324 NHD rod ! N w/l rod
BF00005497 NHD rod ! HHD rod
BLANKS
BF00004500 NHD rod ! NW casing
BF00004501 NHD rod ! HW casing
BF00004502 NHD rod ! HWT casing !
BB00000115 B w/l rod N w/l rod
BF00004883 H w/l rod N w/l rod
BB00000772 NW rod B w/l rod
Saver Sub
Part No Pin End Box End
BF00007345 N w/l rod N w/l rod
BF00006816 NT rod NT rod
BF00006814 NHD rod ! NHD rod !
B SYSTEMS
Part No Pin End Pin End Part No Pin End Box End
BB00000020 AW rod H w/l rod BF00004884 H w/l rod H w/l rod
BF00004743 AW rod HT rod BF00006817 HT rod HT rod
BF00004744 AW rod HW casing BF00006815 HHD rod ! HHD rod !
BB00000021 AW rod PHD rod
/HWT casing !
N SYSTEMS
BB00000049 BW rod H w/l rod Rod Spinner Sub - 300 mm (11.8 in) length
BF00004747 BW rod HT rod Part No Pin End Pin End
BF00004508 BW rod HHD rod ! BG00605985 AM rod HHD rod
BA00001870 BW rod HW casing BF00006640 NW rod H w/l rod
BB00000413 BW rod PHD rod BF00006810 NW rod HT rod
/HWT casing ! BF00003534 NW rod HHD rod !
BB00000097 NW rod H w/l rod BF00006641 NW rod HW casing
H SYSTEMS
BF00004748 NW rod HT rod
BF00003471 NW rod HHD rod !
BA00001872 NW rod HW casing Starter Rod
BB00000412 NW rod HWT casing Part No Box End Box End Length
BA00001745 NW rod 3-1/2 API IF 450
BA00001748 NW rod 3-1/2 API IF 730
Rod/Casing BU00018160 H rod 3-1/2 API IF 730
P SYSTEMS
Part No Box End Pin End BU00019982 HT rod 3-1/2 API IF 730
BF00004883 H w/l rod N w/l rod BU00019983 HHD rod 3-1/2 API IF 730
BF00004777 H w/l rod HT rod BU00019984 HW casing 3-1/2 API IF 730
BA00001874 H w/l rod HHD rod !
BB00000118 H w/l rod NW casing
BB00000185 H w/l rod HW casing
Recovery Tool to Rod/Casing
BB00000112 H w/l rod PHD rod
/HWT casing ! Part No Box End Pin End
BLANKS
BB00000188 H w/l rod NW rod
BF00007237 H w/l rod SHD rod
/PWT casing ! BF00004753 HT rod NW rod
B SYSTEMS
Part No Pin End Pin End Part No Pin End Pin End
BF00004762 AW rod PHD rod BA00001879 P pin bullnose NW rod
/HWT casing !
BB00000324 AW rod PW casing ! PHD adapter subs are now available for use with
BF00004763 AW rod PWT casing Sandvik’s RP625 and RP630 wireline drill rods. They
BF00004766 BW rod PHD rod are easily identified with two grooves.
N SYSTEMS
/HWT casing !
BA00001871 BW rod PW casing
BF00004764 BW rod PWT casing
BF00004767 NW rod PHD rod
/HWT casing !
BB00000323 NW rod PW casing
BF00002289 NW rod PWT casing
H SYSTEMS
Rod/Casing
Part No Box End Pin End
BA00001876 PHD rod HW casing
/HWT casing !
P SYSTEMS
/HWT casing /HWT casing
BLANKS
BB00000772 NW rod B w/l rod
Saver Sub
Part No Pin End Box End
BF00006813 PHD rod PHD rod
/HWT casing ! /HWT casing !
Starter Rod
Part No Box End Box End Length
BA00001745 NW rod 3-1/2 API IF 450
BA00001748 NW rod 3-1/2 API IF 730
BU00018263 HWT/PHD 3-1/2 API IF 730
BU00019984 PWT/SHD 3-1/2 API IF 730
TS1-039:01/ENG © Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
P system
Part No Box End Pin End
BF00005004 PHD rod Solid blank
/HWT casing !
Sandvik Mining reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a
Sandvik representative for clarification on specifications and options.
mining.sandvik.com
141
Sandvik Mining Exploration
EXPLORATION CORING TOOLS
CASING CUTTERS
142
Sandvik Mining Exploration
CASING CUTTER - AW
Item Part No Description Qty
1-7 BF00008278 Casing cutter assembly AW 1
1 BF00008279 Rod plunger upper AW case cutter 1
2 BF00008280 Rod plunger lower AW case cutter 1
3 BF00008281 Compression spring AW case cutter 1
4 BF00008282 Body AW case cutter 1
1 5 BF00008283 Lug AW case cutter 2
6 BF00008284 Pin AW case cutter lug 2
7 BF00008285 Spring pin AW case cutter body 1
6 5
10 9
10
11
12
CASING CUTTER
144
Sandvik Mining Exploration
CASING CUTTER - NW/H
Item Part No Description Qty
1-12 BF00004040 Casing cutter assembly NW/H 1
1 BB00000926 Retaining ring NW/HW case cutter 1
1
2 BB00000927 Body plunger NW case cutter 1
3 BB00000928 S/Steel ball NW/HW case cutter 1
2 4 BB00000929 Water tube NW case cutter 1
5 BB00000930 Plunger NW/HW case cutter 1
6 BB00000931 Pin NW/HW case cutter plunger 1
7 BB00000932 Compression spring NW/HW case cutter 1
8 BB00000933 Rest spring NW case cutter 1
9 BB00000934 Body NW case cutter 1
10 BB00000935 Lug NW case cutter 2
11 BB00000936 Pin NW case cutter lug 2
3
12 BB00000937 Set screw NW case cutter body 1
10 9
10
11
12
RECOVERY TAP
Item Part No Description Qty
1 BB00000192 B W/L RECOVERY TAP - AW ROD BOX 1
2 BB00000155 N WL/BW RECOVERY TAP - BW ROD BOX 1
3 BB00000190 H WL RECOVERY TAP - NW ROD BOX 1
4 BB00000156 NW RECOVERY TAP - NW ROD BOX 1
5 BB00000191 P WL/HWT/HW RECOVERY TAP - NW ROD BOX 1
147
Sandvik Mining Exploration
EXPLORATION CORING TOOLS
WATER SWIVELS AND
HOISTING PLUGS
Sandvik recommends using only Sandvik quality manufactured parts. ROTATING LOAD RATING
Sandvik does not guarantee the consistency or quality of other
Compact (surface) 4,550 kg (10,000 lb)
manufacturers.
Universal 25K 5,000 kg (11,000 lb)
Universal 40K 5,400 kg (12,000 lb)
148
2
5 BB00000608 Spindle extension 1
149
Sandvik Mining Exploration
Water swivel - Universal 40K
Item Part No Description Qty
1-18 BB00001119 Universal water swivel 40K 1
1
1 BB00000688 Hoisting cap 1
2 BB00001116 Compression spring 1
3 BB00001118 O-ring 1
4 BF00006603 Packing upper 1
5 BB00001117 Swivel packing 3
6 BF00006604 Packing lower 1
7 BB00000684 Spindle extension 1
8 BF00001095 Screw 1
2
4
9 BB00000686 Packing housing 1
3 5 10 BB00000683 Spindle nut 1
6 11 BB00000689 Disc spring 1
8
7 12 BB00006602 Retaining ring 1
9 13 BB00000690 Spacer 1
12
10 14 BF00006607 Thrust bearing 1
11
15 BB00000682 Swivel body 1
17 13
16 BB00000687 Spacer 1
14
17 BA00000134 Grease nipple 1
15
16 18 BB00000685 Spindle 1
18
Hose connection #20 NPT
NW rod box connection
For use with B, N, H and P systems
150
Sandvik mining exploration
Water swivel - Compact surface
Item Part No Description Qty
1-14 BB00000087 Compact water swivel - Surface 1
1
1 BB00000074 Swivel cap 1
2 BB00000076 O-ring 1
3 BB00000075 Spring washer 1
4 BB00000082 O-ring 1
5 BB00000077 Swivel packing 1
6 BB00000078 Packing cage 1
2
7 BB00000079 Upper swivel body 1
10
18 20 BB00000082 O-ring 1
22 21 BB00000084 Bearing 1
22 BB00000086 Felt seal 1
151
Sandvik Mining Exploration
Water swivel - Compact underground
1 Item Part No Description Qty
2 1-14 BB00000243 Compact water swivel - Underground 1
1 BB00000161 Swivel cap 1
2 BB00000076 O-ring 1
3 BB00000075 Spring washer 1
3
4 BB00000082 O-ring 1
4
5 BB00000077 Swivel packing 1
5
6 BB00000078 Packing cage 1
6
7 7 BB00000079 Upper swivel body 1
8 8 BB00000080 Wear sleeve 1
9 9 BB00000081 Ball bearing 1
10 BB00000085 Swivel body 1
11 BB00000084 Thrust bearing 1
12 BA00000134 Grease fitting 1
10
13 BB00000086 Felt seal 1
11
14 BB00000083 Spindle 1
12
Hose connection #16 NPT
13 AW rod box connection
For use with B, N and H systems as well as Sandvik’s 66 and 76 thin kerf
14
systems.
18 20 BB00000082 O-ring 1
22 21 BB00000084 Bearing 1
22 BB00000086 Felt seal 1
152
Sandvik Mining Exploration
Water swivel - High speed
Item Part No Description Qty
13 1-12 BF00000509 High Speed Water Swivel (42mm rod pin) 1
1-12 BF00005506 High Speed Water Swivel (AW rod box) 1
5 6 BF00000501 Seal 1
6 7 BF00000504 Housing 1
8 BF00001125 Ball bearing 3
7
9 BF0000050 Shaft 1
8 10 BF00001096 Set screw 1
11 BF00001106 O-ring 1
9 12 BF00000512 Adapter (42 rod pin) 1
12 BF00005504 Adapter (AW rod box) 1
10
TS1-043:01/ENG 02/2016 © Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
BF00000509 is for use with Sandvik’s thin kerf systems and
BF00005506 for B and N systems
11
12
Sandvik Mining reserves the right to make changes to the information on this data sheet without prior notification to users.
Please contact a Sandvik representative for clarification on specifications and options.
MINING.SANDVIK.COM
153
154
Sandvik Mining Exploration
4C CONVENTIONAL CORE BARREL
Item Part No Description
5 9
7 10
CORING AFTERMARKET
155
Sandvik Mining Exploration
WATEREND ASSEMBLY
Item Part No Description Qty
1-2 CV-4C-4339 Waterend assembly 1
1 1125-1 Waterend body 1
2 CV-4C-4340 Plug 7/8" UNF 1
7
OPTIONS TO STANDARD CONFIGURATION
Item Part No Description
8
5 CV-4C-4335 Spacer washer 1/8" 1
5
MKT0113:2 - 01/2015 / ENG © Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
To ensure you have the consumable parts available
6
when you need them, Sandvik has developed a
7 consumables kit for our wireline core barrels based on
the average usage for 1000 m of drilling.
8
ASSEMBLY KIT
9
Item Part No Description Qty
10 - CV-4C-1000 Assembly Kit 1
11 1128-5 Blow out valve loader 1
11 12 CV-4C-4324 Pump coupling 1
13 CV-4C-4314 C spanner 1
14 488-4 Allen key 5/16’’ (for plug 7/8’’ UNF) 1
15 490-9 Allen key 1/8’’ (for set screw) 1
16 NP-MIS-0008 Grease nipple 1/4’’ 1
UNF(race housing)
12
14
15
16
13
Sandvik Mining reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a
Sandvik representative for clarification on specifications and options.
MINING.SANDVIK.COM
157
Sandvik Mining Exploration
CORE DRILLING TOOLS
CONVENTIONAL CORE
BARREL - 8C
WITH INTEGRATED PUMP-OUT SYSTEM FOR EASY CORE RETRIEVAL
158
4
8C OUTER TUBE COMPONENTS
Item Part No Description Qty
9 CV-8C-4115 Outer tube 1.5 m (5 ft) 1
9 CV-8C-4130 Outer tube 3 m (10 ft) 1
9 CV-8C-4145 Outer tube 4.5 m (15 ft) 1
10 BA00000804 Thread protector 1
7
10
8
CORING AFTERMARKET
159
Sandvik Mining Exploration
WATEREND ASSEMBLY
Item Part No Description Qty
11-13 CV-8C-4339 Waterend assembly 1
11 CV-8C-4338 Waterend body with grease niple 1
13 CV-8C-4340 Plug 3/4" BSP 1
11
24 20 CV-8C-4332 Spindle 1
19 21 CV-8C-4334 Spacer washer 1/16" 3
21
22 CV-8C-4333 Radial ball bearing 1
23 CV-8C-4337 Thrust race bearing 1
14
24 CV-8C-4321 Hanger thrust bearing 1
28 32
BLOW OUT VALVE ASSEMBLY
Item Part No Description Qty
30
25-34 CV-8C-1810 Blow out valve assembly 1
25 CV-8C-4301 Bottom valve body 1
26 27 26 CV-8C-4302 Centre valve body 1
27 CV-8C-4303 Lurene "U" packing 2
28 CV-8C-4304 Top valve body 1
33 29 BA00000793 Strainer 1
30 CV-8C-4312 M10 cap screws 6
34 29 31 25 31 BA00000132 Stainless steel ball 1
32 CV-6C8C-4301 Spring 1
33 CV-6C8C-4303 Spring retainer 1
34 CV-6C8C-4300 Ball seat 1
MKT0113:2 - 01/2015 / ENG © Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
19 35 CV-8C-4306 Blow out valve loader 1
13 CV-8C-4340 Plug 3/4" BSP 1
17
32
31
ASSEMBLY KIT
29
Item Part No Description Qty
- CV-8C-1000 Assembly kit 1
35
35 CV-8C-4306 Blow out valve loader 1
36 CV-8C-4324 Pump coupling 1
13 37 BF00008118 Allen key 1/2" 1
38 CV-8C-4320 8C grease nipple 1
39 CV-8C-4314 C spanner 1
36
37
39
38
Sandvik Mining reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a
Sandvik representative for clarification on specifications and options.
MINING.SANDVIK.COM
161
Sandvik Mining Exploration
EXPLORATION CORING TOOLS
WEDGE PLUG ASSEMBLY
162
Sandvik Mining Exploration
DEFLECTOR WEDGE
B DEFLECTOR WEDGE
Item Part No Description Qty
1 BA00000498 Deflector Wedge 1
2 BA00000497 Wedge Dropper 1
1 2
3 BB00000196 B W/L Adapter 1
4 BA00000461 Wedge Plug Assembly 1
5 BA00000499 Steel Plug Basket 1
6 BA00000468 Wooden Wedge 1
7 BA00000463 Copper Shear Pin (Not Shown) 1
N DEFLECTOR WEDGE
Item Part No Description Qty
1 BA00000500 Deflector Wedge 1
2 BA00000501 Wedge Dropper 1
3 BB00000197 N W/L Adapter 1
4 BA00000462 Wedge Plug Assembly 1
5 BA00000502 Steel Plug Basket 1
TS1-026:01/ENG © Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
6 BA00000469 Wooden Wedge 1
7 BA00000463 Copper Shear Pin (Not Shown) 1
3
H DEFLECTOR WEDGE
Item Part No Description Qty
1 BF00009009 Deflector Wedge 1
2 BA00000501 Wedge Dropper 1
3 BB00000199 H W/L Adapter 1
P DEFLECTOR WEDGE
Item Part No Description Qty
5 1 BF00009004 Deflector Wedge 1
6 2 BA00000501 Wedge Dropper 1
3 BF00009012 P W/L Adapter 1
4 BF00009011 Wedge Plug Assembly 1
5 BG00486337 Steel Plug Basket 1
6 BG00486339 Wooden Wedge 1
7 BA00000463 Copper Shear Pin (Not Shown) 1
Sandvik Mining reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a
Sandvik representative for clarification on specifications and options.
MINING.SANDVIK.COM
163
Sandvik Mining Exploration
Wireline Drill Rods
Misconception
Fact :
A drill rod is made up of a
Highly
engineered thread and
should be
handled accordantly
in order to get the maximum
performance and $$ value
164
Sandvik Mining Exploration
Wireline Drill Rods
Identification
All Sandvik rod are
identified
for traceability on the
pin end .
-ie G3708
165
Sandvik Mining Exploration
Field Usage
Care and Handling
166
Sandvik Mining Exploration
Field Usage
Care and Handling
Some common Practises that should take place in the field to in-
crease your Profitability
#1
Inspection of shipment
167
Sandvik Mining Exploration
Field Usage
Care and Handling
#2
Properly Preparing drill rods
for use.
168
Sandvik Mining Exploration
Field Usage
Care and Handling
Store your Sandvik drill rods properly so they are of the ground
slightly, flat and the ends are protected from
damage
#3
Proper handling to
avoid thread damage
169
Sandvik Mining Exploration
Field Usage
Care and Handling
#3
Proper handling to
avoid thread damage
170
Sandvik Mining Exploration
Field Usage
Care and Handling
#3
Proper handling to
avoid thread damage
171
Sandvik Mining Exploration
Field Usage
Care and Handling
#3
Proper handling to
avoid thread damage
172
Sandvik Mining Exploration
Field Usage
Care and Handling
173
Sandvik Mining Exploration
Field Usage
Care and Handling
“GALLING”
When these simple practices
are not part of the daily routine
the result is galling.
174
Sandvik Mining Exploration
Field Usage
Drilling Practices
175
Sandvik Mining Exploration
Field Usage
Drilling Practices
176
Sandvik Mining Exploration
Field Usage
Drilling Practices
177
Sandvik Mining Exploration
Field Usage
Drilling Practices
178
Sandvik Mining Exploration
Field Usage
End Results
179
Sandvik Mining Exploration