ASSESSMENT/DIAGNOSTIC EXAM could there be in a power system? (PER UNIT METHOD) A. 2 C. 3 B.4 D. 1 Time duration: 30 minutes 5. The independent base quantities in power Instructions: system is/are _______. A. Apparent power base 1. Answer the following questions. For B. Apparent power and voltage bases multiple choice questions, write only the C. Voltage, current and impedance bases letter of your choice and for problem D. Apparent power, voltage, current and solving, show complete solution. impedance bases
2. For those with stable internet connectivity,
download the problem through our Google Part II (Problem solving: Show complete classroom from the Google classwork. You solution) will be given 5 minutes to rewrite the problem in your notebook. Timer will start 6. A single phase system has a base apparent when the 5-minute period expires. Put on power of 100 MVA and a base voltage of 50 kV. your video and focus yourself on the What is the base current in amperes and the camera in a way you can be seen while base impedance in ohms? answering the problem. Submit your work through the google class. 7. A three-phase Y-connected system has a base apparent power of 500 MVA and a base voltage 3. For those with unstable internet of 100 kV. What is the base line current in connectivity, problem will be sent via amperes and the base phase impedance in messenger. Upon acknowledged that you ohms? received a copy of the problem, you will be given 5 minutes to rewrite the 8. A three-phase ∆-connected system has a base problem. Timer will start when the 5- apparent power of 500 MVA and a base voltage minute period expires. Submit your work of 100 kV. What is the base line current in and send it through our Google glass if amperes and the base phase impedance in possible when the internet connectivity ohms? improves immediately after the 30-minute period expires, otherwise sent it via a 9. What will be the per unit impedance of a messenger in pdf file. three-phase Y-connected synchronous motor having a rating of 100 kVA, 13.2 kV and having a Part I (Multiple choice: Write only the letter of synchronous impedance of 75 ohms per phase? your choice) 10. What will be the per unit impedance of a 1. What is the per unit system? single-phase synchronous generator having a A. A ratio of actual value in any units to the base rating of 10 kVA, 230 volts and having a or reference value in the same units synchronous impedance of 2 ohms? B. A ratio of the base or reference value in any units to the actual value in the same units C. A ratio of the square of the actual value in any units to the square of base or reference value in the same units D. All of these
2. What is the simplified diagram called, Prepared by:
after omitting all resistances, static loads, capacitance of the transmission lines and magnetizing circuit of the transformer? A. Single line diagram B. Reactance diagram ENGR. ALVIN P. MIGUEL C. Impedance Asst. Professor I diagram D. Both (A) and (C)
3. Which among these is the major
advantage of per unit computations? A. Per unit impedance of transformers is the same referred to either side of it B. For simulating steady state and transient models in the computer this method is very useful C. Manufacturers usually specify the impedance of an apparatus in per unit system D. All of these