Professional Documents
Culture Documents
CRT3333
DEH-P770MP/XN/UC
DEH-P770MP /XN/UC
DEH-P7700MP/XN/UC
DEH-P7750MP/XN/ES
This service manual should be used together with the following manual(s):
Model No. Order No. Mech.Module Remarks
SAFETY INFORMATION
CAUTION
A
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely
repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the
warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk
trying to do so and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the
state of California to cause cancer, birth defects or other reproductive harm.
B Health & Safety Code Section 25249.6 - Proposition 65
- Service Precaution
1. You should conform to the regulations governing
the product (safety, radio and noise, and other
regulations), and should keep the safety during
servicing by following the safety instructions
C described in this manual.
2. Before disassembling the unit, be sure to turn off
the power. Unplugging and plugging the connectors
during power-on mode may damage the ICs inside
the unit.
3. To protect the pickup unit from electrostatic discharge
during servicing, take an appropriate treatment
(shorting-solder) by referring to "the DISASSEMBLY"
4. After replacing the pickup unit, be sure to check the
grating.
DEH-P770MP/XN/UC
2
1 2 3 4
5 6 7 8
Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as
radio/TV interference and foreign noise.
Please be sure that all screws are fastened, and that there are no loose screws.
Please be sure that all connectors are inserted, and that there are no imperfect insertion.
6 Make sure the wiring cables are set to their original state.
Please replace the wiring and cables to the original state after repairs.
In addition, be sure that there are no pinched wires, etc. C
7 Make sure screws and soldering scraps do not remain inside the product.
Please check that neither solder debris nor screws remain inside the product.
8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.
Damaged power cords may lead to fire accidents, so please be sure that there are no damages.
If you find a damaged power cord, please exchange it with a suitable one.
When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure
connections and suitable usage. Please exchange the power cord if necessary.
2. Adjustments
To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.
Adjustments should be performed in accordance with the procedures/instructions described in this manual.
4. Cleaning
For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper
cleaning should be performed to restore their performances.
DEH-P770MP/XN/UC
5 6 7 8
3
1 2 3 4
CONTENTS
SAFETY INFORMATION ..................................................................................................................................... 2
1. SPECIFICATIONS ............................................................................................................................................ 5
A
2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 8
2.1 PACKING ................................................................................................................................................... 8
2.2 EXTERIOR............................................................................................................................................... 10
2.3 CD MECHANISM MODULE..................................................................................................................... 14
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 16
3.1 BLOCK DIAGRAM ................................................................................................................................... 16
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE).............................................................................. 18
3.3 KEYBOARD UNIT.................................................................................................................................... 24
3.4 CD MECHANISM MODULE(GUIDE PAGE) ............................................................................................ 26
4. PCB CONNECTION DIAGRAM ..................................................................................................................... 36
4.1 TUNER AMP UNIT................................................................................................................................... 36
4.2 PANEL UNIT ............................................................................................................................................ 40
B 4.3 KEYBOARD UNIT.................................................................................................................................... 42
4.4 CD CORE UNIT(S10.1) ........................................................................................................................... 44
5. ELECTRICAL PARTS LIST ............................................................................................................................ 46
6. ADJUSTMENT ............................................................................................................................................... 53
6.1 OEL ADJUSTMENT................................................................................................................................. 53
6.2 CD ADJUSTMENT................................................................................................................................... 54
6.3 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT .................................................... 56
6.4 ERROR MODE ........................................................................................................................................ 58
6.5 DOT CLOCK ADJUSTMENT ................................................................................................................... 59
7. GENERAL INFORMATION ............................................................................................................................. 60
7.1 DIAGNOSIS ............................................................................................................................................. 60
7.1.1 DISASSEMBLY ..................................................................................................................................... 60
C 7.1.2 CONNECTOR FUNCTION DESCRIPTION .......................................................................................... 63
7.2 IC ............................................................................................................................................................. 64
7.3 OPERATIONAL FLOW CHART ............................................................................................................... 74
7.4 CLEANING............................................................................................................................................... 75
8. OPERATIONS ................................................................................................................................................ 76
DEH-P770MP/XN/UC
4
1 2 3 4
5 6 7 8
1. SPECIFICATIONS
DEH-P770MP/XN/UC
5 6 7 8
5
1 2 3 4
DEH-P770MP/XN/UC
6
1 2 3 4
5 6 7 8
DEH-P770MP/XN/UC
5 6 7 8
7
1 2 3 4
DEH-P770MP/XN/UC
8
1 2 3 4
5 6 7 8
PACKING SECTION PARTS LIST
Mark No. Description DEH-P770MP/XN/UC DEH-P7700MP/XN/UC DEH-P7750MP/XN/ES
1 Polyethylene Bag CEG1173 CEG1173 CEG-162
2 Cord Assy XDE7007 XDE7007 XDE7007 A
3 Accessory Assy CEA4993 CEA4993 CEA4850
4 •••••
5 Screw Assy CEA3848 CEA3848 CEA3849
XRD7055, English,French,Spanish
XRD7056,
XRD7057,
XRD7058
XRD7059 English,Spanish,Portuguese(B)
DEH-P770MP/XN/UC
5 6 7 8
9
1 2 3 4
2.2 EXTERIOR
91 89 29
A 20
A 31
22 27
10 21
55
33 B
90 28 26
34
36 88 87
35 18 19
59 25 17
24 23
88
68
B
58 32
62 88 5 30
73
85 75
74 C 59
70 69
77
97
60 66 86 70 92 76 9
71
72 79 9
67 63 65 82
84 78 61
C 64 83 8
52 C 7
2 37 40
3 95 40
38 96
2 51 50
93 57 94
2
38 49 41
93 45
47 B
43 39
48 54
42
81 46
D 14 56
A 44
53
16 15
12
80
E
C
B
4 4
13
1
6
A 4
F 11
1
DEH-P770MP/XN/UC
10
1 2 3 4
5 6 7 8
(1)EXTERIOR SECTION PARTS LIST
Mark No. Description Part No. Mark No. Description Part No.
DEH-P770MP/XN/UC
5 6 7 8
11
1 2 3 4
DEH-P770MP/XN/UC
12
1 2 3 4
5 6 7 8
DEH-P770MP/XN/UC
5 6 7 8
13
1 2 3 4
93
13 92
A 26
B 82
44 G
5 13 86 83
C 68
D
1 54 52
B 86
53 28 I H
4
37 28
4 71 45
23 J
1
55 87
5 36 38
4 50
73
1
23
18 29 72
K
2
64 51 10 75
47 1
C I
2 76 B 59
24 1 49
7
61 E
77 90
M F
2 1 48
63 Q
A 27
1
2 H 8
G J 67
21 L
M
1 N D
57 R O
16 17
79 12
D 58 1
3 78
1 33
2 P 46
62 2 20 60
80
40 6
1 1
N
60
1GEM1024 39
11
1
2GEM1045 1 89
25
69 43 10
3GEM1035 P L
30 70 K
56 19
E 14
74
41
R
31 85
C Q
91 14
D 65 35
1 O
85
31
3 2
F 66
85
DEH-P770MP/XN/UC
14
1 2 3 4
5 6 7 8
CD MECHANISM SECTION PARTS LIST
Mark No. Description Part No. Mark No. Description Part No.
46 Rack CNV8374
47 Holder CNV8376 F
48 Holder CNV8377
49 Arm CNV8378
DEH-P770MP/XN/UC
5 6 7 8
15
1 2 3 4
7 6 13 5 10 9 8 11 14 18 19 20 21
FM/AM TUNER UNIT
WC
CE2
ROM_VDD
SL
DI
CK
CE1
NC
DO
NC
NC
NC
NC
B
ANTENNA CN401
AM ANT IC4 IC3
1 5V 3.3V EEPROM
1
2 COMP 16
ATT RF LPF
VDD_3.3
RFGND
DGND
VCC
2 12 15 4 17 20
TUNER 3.3V REGULATOR 15
TUNER 5V REGULATOR
TUN L 41
TUN 3.3V IC420 3 IC421 1
SYS 8.3V L+ 43
3 NJM2391DL1-33 1 NJM2391DL1-05
L- 44
CDL 42
BZ621
BUZZER VST,VCK,VDT
CN101
7 L+
D CD CORE UNIT(S10.1) 11
5
L-
IP-BUS DRIVER
22
LEVEL INDIC
1 BUS- PEE
28 92
8 5 1 TX LVLINL
IC 101 TX
6 HA12240FP 2 RX 27 85
RX MUTE
PICKUP UNIT BUS+
8
19
RX2
D (P9.9MP3)(SERVICE) CN651 IPPW 79
IPPW
V3R3D
CN101 CDL
14
LASER Q101
DIODE LD- 142 1
15 15 LD IC 201 B.UP
SYSPW
Q101 13
MD
UPD63763GJ XIN
143
5 5 PD CN901 X601
RF AMP, CD DECODER, 31 LOUT 80
XOUT
11 10.00MHz
AC,BD LOUT 10 ASENBO
HOLOGRAM MP3 AND WMA DECODER,
UNIT
E,F
DIGITAL SERVO/DATA PROCESSOR Q102 20
OELPW
FOP FOP
FOCUS ACT. 1 1
TOP TOP SYSTEM CONTROLLER
MONITOR TRACKING ACT. 4 4
DIODE
LD+ FD,TD SD,MD IC 601(2/2)
14 14 X701 BRST,BRXEN,BSRQ PEG070A B
12 BDATA,BSCK,CONT,
FOP
13 12 13 CDMUTE
TOP
X1 X2 FLPILM
M1
CD 40
SPINDLE M DRIVER MICRO S802 EJTIN
MOTOR 16 COMPUTER 42
SOP 22 53 39
15 LOEJ LOEJ DSENS
SOM
DETACH SENSE SW ILB CONT
SWVDD
18
CSENS
ILMPW
M2 LCOP 9 47 B.UP
DPDT
KYDT
ROT1
ROT0
M CONT CONT Q
LOADING/CARRIAGE 17 BRST,BRXEN,BSRQ
LCOM
E MOTOR
IC 301 IC 701 BDATA,BSCK Q822
Q650 91 34 33 38 35 36 41
BA5835FP PE5454A VD
VD
3 21 B.UP
4 20 VD
32
12EJ
31
8EJ
49
30 VDCONT Q8
DSCSNS
97 VDD
HOME
Q651
VDCONT VDCONT
19 5
Q8
S904 S905 S903 S901
12EJ 8EJ DSCSNS HOME 3V REGULATOR 19 VDD
3 2 VDD
3VDD IC 703 5
V3R3D
3 IC 203 1 VD2 S-812C33AUA-C2N
NJM2885DL1-33
VDD Q641
3.3V REGULATOR VD2 VD2
2 22 VD
Q642
DEH-P770MP/XN/UC
16
1 2 3 4
5 6 7 8
CN351
P7700MP,P7750MP
RESET RL RL RL
2 REAR L
1 2 Q351
IC602 VDD
S-80835CNUA-B8U
11 14 CN352
IN5 OUT5
10 PL 7 18 PL PL
IN1 OUT1 NON-FAD/SW L
RESET
Q353
HI-OUT
CE2 69 IC451
TUNPCE2 PA2028A
CE1 70 FL 9 16 FL FL
DO 98
TUNPCE1 IN3 OUT3 FRONT L
TUNPDI Q352
DI 99
TUNPDO P770MP
CK 100
TUNPCK VDD REGULATOR B
Q911
SL 95 SL VDD
Q912
SYSTEM CONTROLLER
IC 601(1/2)
67
PEG070A DALMON
BUFFER CN901
Q404
B.UP
81 ILM
ISENS 5 5 ILM
Q951 Q941
VDD
ILM SENSE TEL
8
8 8 TEL
TELIN
KEYAD
89 TELEPHONE MUTE
ASLIN 93
57
ASLIN
KEYD
2 C
EMUTE
ELECTRONIC VOLUME/
SOURCE SELECTOR MICROPHONE 2 2 GND
20 B.UP
MUTE 1
15
NOISEDET 13 MIC POWER AMP 6,20
TUN L 41 IN2L MICIN
12 23
L+ 43 FL- 10 10 FL-
IN4L+ IC201 PreOutL IC 301
21
L- 44 PML009A 10 14 PAL007A FL+ 12 12 FL+
IN4L- F OutL FLIN 3
11 12 RL- 9 9 RL-
R OutL RLIN 5
CDL 42 IN3L RL+ 11 11 RL+
SELOutL MUTE STBY B.REM
1 22 4 25
6 6 B.REM
VST,VCK,VDT
MUTE
Q982
JTIN
40
8 8
B PANEL UNIT C KEYBOARD UNIT
42
DGND S1970
9 9
ILB CONTROL
EJECT CN1901
ILMPW
B.UP
ROT0
Q821
ILB ILB ROT COMMANDER
Q822
7 7 4 9 S2030
E
41
ROT0 13 ROT0 ROT0 10 JOYST
13 9 4
ROT1 12 ROT1 ROT1 1
12 7 6 FONT ROM
IC 1990
SWVDD PD8135A
(P770MP)
3.3V REGULATOR PD8136A
ROMCE
AVCC
S-818A33AUC-BGN
ADDRESS
12 2 43 14
DATA
3
Q832 OPT IN IC 1991 60 14 96 97 48 47 46 42 95
TSOP4840SB1 1 5 KEY DATA ILLUMINATION
DPDT DPDT
VCC1
JOYST
AVCC
CS1
VREF
CS0
CS2
VCC2
RD
11 11 10 3 REM
REMOTE CONTROL
SENSOR 27
DPDT 13
XIN
KEY/OEL CONTROLLER X1940 OEL UNIT
KYDT KYDT 28 IC 1940 11 IC2000 IC2001
14 14 8 5 KYDT PEG072A XOUT PM5006A PM5007A
10 4,16 5 2,8
OEL DATA
OEL+B
OEL+B 10 10 5 8
SWVDD 5V
16V
F
4 4 3 10
CN1951 Q1980
CN1950 +9.1V Q1981
REGULATOR
9.1V
DEH-P770MP/XN/UC
5 6 7 8
17
1 2 3 4
*1 IP-BUS(P770):7.16dBs
IP-BUS(P7700,P7750):9.3dBs
A-a A-b Guide page CD(P770):8.32dBs
CD(P7700,P7750):10.46dBs
FM(P770):2.48dBs
FM(P7700,P7750):4.6dBs
IP-BUS:-2.2dBs AM(P770):-8.04dBs
AM(P7700,P7750):-5.9dBs
FM:-20.5dBs
AM:-31.0dBs
*1
FM/AM TUNER UNIT
CD:-0.36dBs
B PANEL UNIT
EJECT
E
C
NOTE :
For resistors and capacitors in the circuit diagrams, their resistance values or
Symbol indicates a resistor. capacitance values are expressed in codes:
No differentiation is made between chip resistors and
discrete resistors. Ex. *Resistors
Symbol indicates a capacitor. Code Practical value
No differentiation is made between chip capacitors and 123 12k ohms
discrete capacitors. 103 10k ohms
A B
DEH-P770MP/XN/UC
18
1 2 3 4
5 6 7 8
A
A-b
A TUNER AMP UNIT
REAR
R ch
10k(B) REAR
> 3A
L ch
FRONT
R ch
*1
FRONT
L ch
SUB WOOFER
R ch
SUB WOOFER
L ch
>
FUSE
CEK1208 BACK UP
10A
*2
DETACH SENSE
IP-BUS(P770):33.16dBs
*2 IP-BUS(P7700,P7750):35.3dBs
CD(P770):34.32dBs
CD(P7700,P7750):36.46dBs
FM(P770):28.46dBs
FM(P7700,P7750):30.6dBs
AM(P770):17.96dBs
AM(P7700,P7750):20.1dBs
A
DEH-P770MP/XN/UC
5 6 7 8
19
F
E
B
A
D
C
20
A-a A-b
A-a
A-b
1
1
*1 IP-BUS(P770):7.16dBs
IP-BUS(P7700,P7750):9.3dBs
CD(P770):8.32dBs
CD(P7700,P7750):10.46dBs
FM(P770):2.48dBs
FM(P7700,P7750):4.6dBs
IP-BUS:-2.2dBs AM(P770):-8.04dBs
AM(P7700,P7750):-5.9dBs
2
2
FM:-20.5dBs
AM:-31.0dBs
*1
1
DEH-P770MP/XN/UC
3
3
4
4
5
5
CD:-0.36dBs
B PANEL UNIT
2
6
6
EJECT
DEH-P770MP/XN/UC
7
7
NOTE :
For resistors and capacitors in the circuit diagrams, their resistance values or
Symbol indicates a resistor. capacitance values are expressed in codes:
No differentiation is made between chip resistors and
discrete resistors. Ex. *Resistors
Symbol indicates a capacitor. Code Practical value
No differentiation is made between chip capacitors and 123 12k ohms
discrete capacitors. 103 10k ohms
3
8
A-a A-b
A-a B
A-b
21
E
A
D
C
F
B
F
E
B
A
D
C
22
A-a A-b
A-b
1
1
REAR
R ch
10k(B) REAR
> 3A
L ch
2
2
FRONT
R ch
FRONT
L ch
DEH-P770MP/XN/UC
3
3
SUB WOOFER
R ch
SUB WOOFER
L ch
4
4
>
FUSE
CEK1208 BACK UP
>
FUSE
CEK1208 BACK UP
10A
5
5
*2
2
DETACH SENSE
6
6
DEH-P770MP/XN/UC
7
7
IP-BUS(P770):33.16dBs
*2 IP-BUS(P7700,P7750):35.3dBs
CD(P770):34.32dBs
CD(P7700,P7750):36.46dBs
FM(P770):28.46dBs
FM(P7700,P7750):30.6dBs
AM(P770):17.96dBs
AM(P7700,P7750):20.1dBs
3
8
8
A-a A-b
A-b
23
E
A
D
C
F
B
1 2 3 4
B
CN1951
C
DEH-P770MP/XN/UC
24
1 2 3 4
5 6 7 8
C KEYBOARD UNIT
SYSTEM MICROCOMPUTER
D
P770MP:PD8135A
P7700MP:PD8136A
P7750MP:PD8136A
E
15k(B)
15k(B)
F
OEL UNIT MXS8221
C
DEH-P770MP/XN/UC
5 6 7 8
25
1 2 3 4
A
D-a
F
C
T
S
PICKUP UNIT(P9.9MP3)(SERVICE)
F
T
T
T
F
T
T #
F
F @
T
3
$
2 S
T
7
1 9
C
F
8
4
E
M1 CXC4440 0
5 TY
SPINDLE MOTOR
S
S F
F
C T
T
C
M2 CXB8933
LOADING
/CARRIAGE
C
S
S
MOTOR CD DRIVER
D
DEH-P770MP/XN/UC
26
1 2 3 4
5 6 7 8
A
D-b
SWITCHES:
CD CORE UNIT(S10.1)
S901:HOME SWITCH..........ON-OFF
ras
S903:DSCSNS SWITCH......ON-OFF
S904:12EJ SWITCH.............ON-OFF
S905:8EJ SWITCH...............ON-OFF
D CD CORE UNIT(S10.1)
3.3V REGULATOR
SRAMLEVEL2
MICRO COMPUTER
A
3V REGULATOR
SRAMLEVEL1 CN651
SRAMLEVEL0
E
6
TYPE_A/D
&
D
DEH-P770MP/XN/UC
5 6 7 8
27
F
E
B
A
D
C
28
D-a
A-a D-b
D-a
D-b
1
1
S
PICKUP UNIT(P9.9MP3)
(SERVICE)
2
2
F
T
T
DEH-P770MP/XN/UC
F
T
T #
3
3
F
F @
T
4
4
2
2
5
5
3
3
$
6
6
2 S
T
9 7
1
C
F
8
4
M1 CXC4440 0
5
SPINDLE MOTOR
S
4
S F
F
C T
DEH-P770MP/XN/UC
T
C
M2 CXB8933
7
7
LOADING
S
C
S
C
/CARRIAGE
5
MOTOR CD DRIVER
6
8
8
D-a
A-a D-b
D-a
D-b
29
E
A
D
C
F
B
F
E
B
A
D
C
30
D-a D-b
D-b
1
1
1
SWITCHES:
CD CORE UNIT(S10.1)
S901:HOME SWITCH..........ON-OFF
ras
S903:DSCSNS SWITCH......ON-OFF
S904:12EJ SWITCH.............ON-OFF
S905:8EJ SWITCH...............ON-OFF
2
2
SIGNAL LINE
F
FOCUS SERVO LINE
T
TRACKING SERVO LINE
C
CARRIAGE SERVO LINE
! S
SPINDLE SERVO LINE
D CD CORE UNIT(S10.1)
DEH-P770MP/XN/UC
3
3
3.3V REGULATOR
4
4
2
2
5
5
3
SRAMLEVEL2
MICRO COMPUTER
6
6
A
3V REGULATOR
SRAMLEVEL1 CN651
SRAMLEVEL0
6
TYPE_A/D
4
^
DEH-P770MP/XN/UC
7
7
&
5
6
8
8
D-a D-b
D-b
31
E
A
D
C
F
B
1 2 3 4
- Waveforms Note : 1. The encircled numbers denote measuring points in the circuit diagram.
2. Reference voltage REFO1(1.65V)
A
1 DSCSNS 5V/div 500ms/div 1 DSCSNS 5V/div 500ms/div 1 DSCSNS 5V/div 500ms/div
2 8SNS 5V/div 5 CLCONT 5V/div 2 8SNS 5V/div
3 12SNS 5V/div 4 LOEJ 5V/div 3 12SNS 5V/div
4 LOEJ 5V/div 6 VD 10V/div 4 LOEJ 5V/div
12 cm CD Loading operation 12 cm CD Loading operation 8 cm CD Loading operation
12 cm CD-DA setup operation after loading 12 cm CD-ROM(1 session) setup operation 12 cm CD-ROM(3 sessions) setup operation
after loading after loading
DEH-P770MP/XN/UC
32
1 2 3 4
5 6 7 8
D
Ref.: Ref.: Ref.:
REFO AGND GND
DEH-P770MP/XN/UC
5 6 7 8
33
1 2 3 4
Ref.: Ref.:
REFO REFO
Mode: Mode:
Normal Normal
DEH-P770MP/XN/UC
34
1 2 3 4
5 6 7 8
DEH-P770MP/XN/UC
5 6 7 8
35
1 2 3 4
SIDE A
B SIDE B
P.C.Board Chip Part
D CN901
E
F
DETACH SENSE
A
DEH-P770MP/XN/UC
36
1 2 3 4
5 6 7 8
SIDE A A
SY
RCA
ANTENNA
B
CORD ASSY
B CN1950
F
FRONT
A
DEH-P770MP/XN/UC
5 6 7 8
37
1 2 3 4
A
A TUNER AMP UNIT
A
DEH-P770MP/XN/UC
38
1 2 3 4
5 6 7 8
SIDE B A
A
DEH-P770MP/XN/UC
5 6 7 8
39
1 2 3 4
C CN1901
EJECT
D
B PANEL UNIT SIDE B
A CN801
B
DEH-P770MP/XN/UC
40
1 2 3 4
5 6 7 8
DEH-P770MP/XN/UC
5 6 7 8
41
1 2 3 4
CLK
C KEYBOARD UNIT SIDE A
A
6
5
B
4
3
C
2
1
OEL UNIT
D
SW
E
EQ
DISP
LIST
SRC
ESC
C
DEH-P770MP/XN/UC
42
1 2 3 4
5 6 7 8
B CN1951
TP1
TP3
TP2
OEL UNIT
C
DEH-P770MP/XN/UC
5 6 7 8
43
1 2 3 4
M2
LOADING
/CARRIAGE
B MOTOR
M1
SPINDLE
MOTOR
C A
CN651
PICKUP UNIT(P9.9MP3)(SERVICE)
D HOME
FE
REFO1
D
DEH-P770MP/XN/UC
44
1 2 3 4
5 6 7 8
8EJ
12EJ
DSCSNS
B
D
DEH-P770MP/XN/UC
5 6 7 8
45
1 2 3 4
B Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
Q 981 (B,27,90) Transistor 2SC4081
Q 982 (A,129,98) Transistor UMD2N
A
D 131 (A,62,65) Diode Network DA204U
D 132 (A,46,68) Diode Network DA204U
Unit Number:XWM7083(P770MP) D 133 (A,55,59) Diode DAN202U
DEH-P770MP/XN/UC
46
1 2 3 4
5 6 7 8
Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
> FU351 (B,121,115) Fuse 3A CEK1286 R 361 (B,158,131) RS1/16S223J
BZ621 (A,133,22) Buzzer CPV1062 R 362 (B,156,126) RS1/16S223J
AR401 (A,158,117) Surge Protector DSP-201M-S00B R 363 (B,131,113) (P770MP) RS1/16S471J
> Fuse 10A CEK1208 A
FM/AM Tuner Unit CWE1802 R 364 (B,131,124) (P770MP) RS1/16S471J
R 365 (B,139,127) (P770MP) RS1/16S471J
RESISTORS R 366 (B,125,133) (P770MP) RS1/16S471J
R 367 (B,160,130) (P770MP) RS1/16S471J
R 101 (B,36,134) RS1/16S101J R 368 (B,156,123) (P770MP) RS1/16S471J
R 102 (B,36,132) RS1/16S620J
R 103 (B,36,126) RS1/16S101J R 403 (B,158,69) RS1/16S681J
R 104 (A,38,82) RS1/16S102J R 404 (A,104,73) RS1/16S681J
R 105 (A,45,82) RS1/16S472J R 406 (B,155,78) RS1/16S681J
R 407 (B,122,47) RS1/16S681J
R 106 (A,47,85) RS1/16S472J R 408 (B,155,80) RS1/16S681J
R 107 (B,24,127) RS1/16S821J
R 409 (B,155,83) RS1/16S681J B
R 108 (B,22,127) RS1/16S223J
R 109 (B,32,104) RS1/16S222J R 410 (B,122,50) RS1/16S681J
R 110 (B,30,120) RS1/16S821J R 411 (B,155,85) RS1/16S681J
R 412 (B,122,52) RS1/16S681J
R 111 (B,28,120) RS1/16S223J R 413 (B,156,88) RS1/16S681J
R 112 (B,26,120) RS1/16S102J
R 113 (B,23,132) RS1/16S102J R 416 (B,148,36) RS1/16S222J
R 114 (B,42,106) RS1/16S223J R 417 (B,148,39) RS1/16S561J
R 115 (B,37,106) RS1/16S472J R 418 (B,148,43) RS1/16S561J
R 419 (B,148,45) RS1/16S222J
R 131 (A,60,62) RS1/16S563J R 421 (B,143,44) RS1/16S471J
R 132 (A,48,70) RS1/16S563J
R 133 (A,59,70) RS1/16S104J R 424 (A,99,68) RS1/16S471J
R 451 (A,124,75) (P770MP) RS1/16S103J C
R 134 (A,48,72) RS1/16S104J
R 135 (A,63,61) RS1/16S474J R 452 (A,126,75) (P770MP) RS1/16S123J
R 453 (A,120,72) (P7700MP,P7750MP)RS1/16S0R0J
R 136 (A,54,64) RS1/16S474J R 454 (A,117,68) (P7700MP,P7750MP)RS1/16S0R0J
R 161 (A,18,133) (P770MP,P7700MP)RS1/16S102J
R 162 (B,14,131) (P770MP,P7700MP)RS1/16S102J R 455 (A,118,72) (P7700MP,P7750MP)RS1/16S0R0J
R 163 (A,18,131) (P770MP,P7700MP)RS1/16S103J R 456 (A,121,72) (P7700MP,P7750MP)RS1/16S0R0J
R 164 (A,18,129) (P770MP,P7700MP)RS1/16S103J R 457 (A,122,69) (P7700MP,P7750MP)RS1/16S0R0J
R 458 (A,125,68) (P7700MP,P7750MP)RS1/16S0R0J
R 165 (A,18,135) (P7750MP) RS1/16S R 601 (B,111,60) (P770MP,P7750MP)RS1/16S104J
J
R 201 (A,115,72) RAB4C102J R 602 (B,106,62) (P7700MP) RS1/16S104J
R 220 (A,75,93) RS1/16S102J R 603 (B,111,62) (P770MP,P7700MP)RS1/16S104J
R 221 (B,73,84) RS1/16S102J R 604 (B,113,54) (P7750MP) RS1/16S104J D
R 222 (B,99,102) RS1/16S471J R 605 (B,106,60) RS1/16S104J
R 223 (B,97,78) RS1/16S471J R 606 (A,90,63) RS1/16S104J
Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
R 667 (B,58,41) RS1/16S102J R 951 (A,59,105) RD1/4PU153J
R 668 (B,61,33) RS1/16S102J R 952 (A,42,89) RS1/16S472J
Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
C 352 (A,141,116) (P770MP) CEJQ100M25 C 821 (B,74,13) CKSRYB473K25
C
C
426
430
(B,124,36)
(A,101,71)
CKSRYB104K16
CCSRCH470J50
B
Unit Number:CWM8758
C 451 (B,128,83) (P770MP) CKSQYB225K10
C 452 (A,125,83) (P770MP) CEJQ100M16
Unit Name:Panel Unit
C 453 (B,130,79) (P770MP) CKSYB684K16
MISCELLANEOUS
C 454 (A,117,85) (P770MP) CEJQ4R7M35
C 455 (A,131,90) (P770MP) CEJQ101M16 D 1970 LED CL220PGC
C 456 (A,125,72) (P770MP) CKSRYB105K10 S 1970 Push Switch(EJECT) CSG1112
C 457 (A,125,70) (P770MP) CKSRYB105K10
C 458 (B,128,75) (P770MP) CKSRYB105K10 RESISTORS D
C
C 602 (A,86,52) CEJQ4R7M35
C 603 (B,83,54) CCSRCH101J50
C 604 (A,68,56) CEJQ2R2M50 Unit Number: E
C 605 (B,90,56) CCSRCH200J50 Unit Name:Keyboard Unit
C 606 (B,89,52) CCSRCH200J50
C 643 (B,78,42) CKSRYB683K16 MISCELLANEOUS
C 644 (A,56,30) CEAT471M16
C 650 (B,17,56) CKSRYB473K25 IC 1910 (B,13,57) IC S-818A33AUC-BGN
IC 1940 (B,27,85) IC PEG072A
C 651 (A,13,53) CEJQ101M16 IC 1990 (A,22,108) IC(P770MP) PD8135A
C 652 (B,59,37) CKSRYB152K50 IC 1990 (A,22,108) IC(P7700MP,P7750MP)PD8136A
C 653 (B,59,35) CKSRYB152K50 IC 1991 (A,28,150) IC TSOP4840SB1
C 654 (B,81,22) CCSRCH470J50 Q 1980 (B,11,68) Transistor 2SC4617
C 751 (A,102,89) CEJQ100M16
Q 1981 (A,6,63) Transistor 2SC2411K F
C 752 (A,91,95) CEJQ220M10 D 1903 (A,22,62) LED SML311BBT(PQ)
C 753 (A,94,81) CEJQNP100M16 D 1904 (A,38,45) LED SML311BBT(PQ)
C 754 (B,82,81) CKSRYB474K10 D 1905 (A,4,45) LED SML311BBT(PQ)
C 755 (B,89,84) CKSRYB474K10
DEH-P770MP/XN/UC
5 6 7 8
49
1 2 3 4
Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
D 1906 (A,22,29) LED SML311BBT(PQ) R 1946 (B,15,86) RS1/16S473J
R 1947 (B,15,92) RS1/16S101J
D 1907 (A,40,64) LED SML311BBT(PQ) R 1948 (B,14,92) RS1/16S101J
A D 1908 (A,40,26) LED SML311BBT(PQ) R 1949 (B,17,92) RS1/16S101J
D 1910 (A,5,156) LED CL-195PG-CD
D 1911 (A,14,20) LED SML311BBT(PQ) R 1950 (B,22,104) RS1/16S101J
D 1912 (A,30,8) LED SML311BBT(PQ) R 1951 (B,23,104) RS1/16S101J
R 1952 (B,24,100) RAB4C101J
D 1913 (A,28,20) LED SML311BBT(PQ) R 1953 (B,28,101) RAB4C101J
D 1914 (A,12,8) LED SML311BBT(PQ) R 1954 (A,25,94) RAB4C101J
D 1915 (A,20,156) LED SML311BBT(PQ)
D 1940 (B,22,70) Diode 1SS355 R 1955 (A,21,93) RAB4C101J
L 1901 (A,17,135) Inductor CTF1530 R 1956 (B,34,101) RAB4C101J
R 1957 (A,17,93) RAB4C101J
L 1940 (A,13,63) Inductor CTF1530 R 1958 (A,28,88) RAB4C101J
TH1980 (B,7,62) Thermistor CCX1037 R 1959 (A,13,93) RAB4C101J
B X 1940 (B,27,73) Ceramic Resonator 16MHzCSS1616
S 1901 (A,9,8) Push Switch CSG1155 R 1960 (A,32,63) RS1/16S101J
S 1902 (A,34,9) Push Switch CSG1155 R 1961 (B,37,94) RS1/16S101J
R 1962 (B,36,103) RS1/16S101J
S 1903 (A,18,20) Switch CSG1110 R 1963 (A,28,79) RS1/16S101J
S 1904 (A,24,20) Switch CSG1110 R 1964 (A,34,63) RS1/16S101J
S 1905 (A,37,26) Push Switch CSG1155
S 1906 (A,37,65) Push Switch CSG1155 R 1967 (A,28,74) RS1/16S101J
S 1907 (A,38,86) Switch CSG1107 R 1968 (A,28,77) RS1/16S101J
R 1969 (A,28,75) RS1/16S101J
S 1908 (A,38,95) Switch CSG1108 R 1980 (B,11,71) RS1/16S333J
S 1909 (A,38,112) Switch CSG1107 R 1981 (B,11,66) RS1/16S683J
S 1910 (A,38,121) Switch CSG1108
C S 1911 (A,38,138) Switch CSG1107 R 1982 (A,8,59) RS1/16S393J
S 1912 (A,38,147) Switch CSG1108 R 1983 (A,9,63) RS1/16S392J
R 1991 (B,39,133) RS1/16S2R2J
S 1913 (A,24,156) Switch CSG1110 R 1992 (B,26,156) RS1/16S101J
S 2030 (A,21,46) Switch CSX1065 R 1993 (B,30,157) RS1/16S103J
VR2000 (B,33,117) Semi-fixed 15kΩ(B)CCP1230
VR2001 (B,33,111) Semi-fixed 15kΩ(B)CCP1230 R 2001 (B,28,115) RS1/16S222J
OEL UNIT MXS8221 R 2002 (A,24,120) RS1/16S222J
R 2003 (A,23,80) RS1/16S102J
RESISTORS R 2004 (A,21,80) RS1/16S102J
R 2006 (B,19,74) RS1/16S102J
R 1901 (B,14,151) RS1/16S222J
R 1902 (B,9,151) RS1/16S222J R 2007 (B,17,74) RS1/16S102J
D R 2008 (A,11,79) RS1/16S102J
R 1903 (B,32,131) RS1/16S473J
R 1905 (B,36,32) RS1/16S391J R 2009 (A,13,86) RS1/16S102J
R 1906 (B,33,32) RS1/16S101J R 2031 (B,28,40) RS1/16S332J
R 2032 (B,8,39) RS1/16S822J
R 1907 (B,17,28) RS1/16S391J
R 1908 (B,17,25) RS1/16S101J R 2033 (B,11,39) RS1/16S473J
R 1909 (B,36,29) RS1/16S391J R 2034 (B,29,38) RS1/16S222J
R 1910 (B,33,29) RS1/16S101J R 2035 (B,29,36) RS1/16S103J
R 1914 (A,40,80) RS1/16S181J R 2036 (B,29,34) RS1/16S103J
DEH-P770MP/XN/UC
50
1 2 3 4
5 6 7 8
Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
R 307 (A,36,85) RS1/16SS183J
C 1942 (B,22,64) CKSRYB105K10 R 308 (A,32,83) RS1/16SS183J
C 1943 (B,30,98) CKSRYB103K50 R 309 (A,38,89) RS1/16SS183J
C 1944 (B,18,67) CSZSR4R7M10 R 310 (A,35,88) RS1/16SS183J A
C 1990 (A,29,109) CKSRYB103K50 R 601 (B,43,59) RS1/16S101J
C 1991 (B,30,155) CKSYF106Z10
R 602 (B,41,62) RS1/16S101J
C 2000 (A,15,81) CKSRYB104K25 R 606 (B,44,67) RS1/16S0R0J
C 2001 (A,19,119) CKSRYB104K25 R 607 (B,43,56) RS1/16SS0R0J
C 2003 (B,23,116) CKSRYB104K25 R 608 (B,36,67) RS1/16SS0R0J
C 2004 (A,18,81) CKSRYB104K16 R 705 (B,50,59) RS1/16SS221J
C 2005 (A,15,79) CKSRYB104K25
R 706 (B,57,61) RS1/16SS221J
C 2006 (A,15,83) CKSRYB104K25 R 707 (A,62,47) RS1/16SS473J
C 2007 (A,18,80) CKSRYB104K16 R 708 (B,50,57) RS1/16SS221J
R 710 (A,28,77) RS1/16SS102J
R 711 (B,44,53) RS1/16SS221J B
D
Unit Number:CWX3096
R
R
714
716
(B,51,53)
(A,63,56)
RS1/16SS473J
RS1/16SS472J
R 719 (B,49,45) RS1/16SS221J
Unit Name:CD Core Unit(S10.1) R 720 (B,46,52) RS1/16SS471J
R 724 (A,62,42) RS1/16S473J
MISCELLANEOUS
R 725 (B,57,43) RS1/16SS222J
IC 201 (A,39,24) IC UPD63763GJ R 726 (A,52,41) RS1/16SS103J
IC 203 (B,45,78) IC NJM2885DL1-33 R 727 (B,50,54) RS1/16SS473J
IC 301 (A,49,88) IC BA5835FP R 729 (A,57,40) RS1/16SS223J
IC 701 (A,48,51) IC PE5454A R 730 (A,65,41) RS1/16SS473J
IC 703 (A,30,44) IC S-812C33AUA-C2N C
R 731 (A,53,41) RS1/16SS104J
Q 101 (A,20,22) Transistor 2SA1577 R 737 (A,41,42) RS1/16SS104J
Q 701 (B,62,59) Transistor UN2111 R 740 (A,35,46) RS1/16SS473J
L 203 (A,53,32) Inductor CTF1389 R 742 (A,50,41) RS1/16SS104J
L 207 (A,53,31) Inductor CTF1389 R 746 (B,60,56) RS1/16SS104J
L 209 (A,26,20) Inductor CTF1389
R 750 (A,39,59) RS1/16SS473J
L 703 (A,64,49) Inductor CTF1389 R 754 (B,48,60) RS1/16SS102J
X 201 (A,51,35) Ceramic Resonator 16.934MHzCSS1603 R 755 (A,43,61) RS1/16SS102J
X 701 (A,59,53) Ceramic Resonator 4.00MHzCSS1652 R 765 (B,51,40) RAB4CQ221J
S 901 (A,15,43) Switch(HOME) CSN1067 R 769 (B,48,40) RAB4CQ221J
S 903 (B,53,100) Switch(DSCSNS) CSN1068
R 773 (B,39,37) RAB4CQ221J D
S 904 (B,35,108) Switch(12EJ) CSN1067 R 777 (B,48,51) RS1/16SS221J
S 905 (B,48,109) Switch(8EJ) CSN1067 R 778 (B,48,52) RS1/16SS221J
R 779 (B,45,54) RS1/16SS221J
RESISTORS R 901 (B,52,65) RAB4CQ221J
DEH-P770MP/XN/UC
5 6 7 8
51
1 2 3 4
DEH-P770MP/XN/UC
52
1 2 3 4
5 6 7 8
6. ADJUSTMENT
6.1 OEL ADJUSTMENT
A
Adjustment point
KEYBOARD UNIT(SIDE B)
TP3 TP1
Digital Multi-Meter TP2
1. Use VR2000 to adjust the resistance between TP1 and TP3 to 6.2kΩ.
2. Use VR2001 to adjust the resistance between TP2 and TP3 to 6.2kΩ.
F
DEH-P770MP/XN/UC
5 6 7 8
53
1 2 3 4
6.2 CD ADJUSTMENT
DEH-P770MP/XN/UC
54
1 2 3 4
5 6 7 8
- Flow Chart
[KEY] [4]+[6]+Reset or
[4]+[6]+BU+ACC A
Contents Test Mode In
Display
[CD]or[SOURCE]
Source On
[BAND] [2]
*2) Focus Close → S.Curve check setting → F EQ measurement setting [BAND] Power On / Off
TRK 00 MIN 00 SEC 00 TRK 01 MIN 01 SEC 01 TRK 02 MIN 02 SEC 02
(TRK 99 MIN 99 SEC 99) CRG + / TR Jump +
[→]
(Direction of the external surface)
*3) F.Offset Display → T.Offset Display → Switch to the order of the original display CRG - / TR Jump -
[←]
(Direction of the internal surface)
U.CLS and AGC and Applicable servomechanism /
[1]
*4) 1TR / 32TR / 100TR AGC, AGC display setting
RF Gain switching / Offset adjustment display / E
[2]
T.Balance adjustment / T.Open
*5) Single TR → 32TR → 100TR → CRG Move Close, S.Curve / Rough Servo and RF AGC /
[3]
9x(8x) : 91(81) 92(82) 93(83) 94(84) F, T, RF AGC
SPDL 1X / 2X switching
[4]
*6) Only at the time of CRG move, 100TR jump As for the double speed (2x), audio output cannot be supported.
1st - ON : ERR count Beginning (30Sec)
[5] Error Rate measurement
2nd - ON : BER display data [%]
*7) TRK/MIN/SEC → F.AGC → T.AGC → F Bias → RF AGC F.Mode switching / Tracking Close /
[6]
CRG • TR Jump switching
DEH-P770MP/XN/UC
5 6 7 8
55
1 2 3 4
• Note :
The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism
module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU
unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the
PU unit must be changed, the grating should be checked using the procedure below.
• Purpose :
To check that the grating is within an acceptable range when the PU unit is changed.
B • Symptoms of Mal-adjustment :
If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform
track search operations, or taking a long time for track searching.
• Method :
• Measuring Equipment • Oscilloscope, Two L.P.F.
• Measuring Points • E, F, REFO1
• Disc • TCD-782
• Mode • TEST MODE
CD CORE UNIT(S10.1)
C
L.P.F.
Xch Ych
E 100kΩ
Oscilloscope
VREF 390pF
F 100kΩ
VREF 390pF
D L.P.F.
F
E
REFO1
• Checking Procedure
1. In test mode, load the disc and switch the 3V regulator on.
2. Using the → and ← buttons, move the PU unit to the innermost track.
3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance
adjustment the display should now read "81". Press key 3. The display will change, returning to "81" on the
fourth press.
4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase
E
difference is within 75° . Refer to the photographs supplied to determine the phase angle.
5. If the phase difference is determined to be greater than 75° try changing the PU unit to see if there is any
improvement. If, after trying this a number of times, the grating angle does not become less than 75° then the
mechanism should be judged to be at fault.
• Note
Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be
seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the
average angle.
• Hint
Reloading the disc changes the clamp position and may decrease the "wobble".
DEH-P770MP/XN/UC
56
1 2 3 4
5 6 7 8
0° 30°
45° 60°
75° 90°
DEH-P770MP/XN/UC
5 6 7 8
57
1 2 3 4
DEH-P770MP/XN/UC
58
1 2 3 4
5 6 7 8
A
- PCL output
In the normal operation mode (with the detachable panel installed, the ACC switched ON, the standby mode
cancelled), shift the TESTIN (Pin 86) terminal to H.
The clock signal is output from the PCL terminal (Pin 37).
The frequency of the clock signal is 312.5kHz that is one 32th of the fundamental frequency.
The clock signal should be 312.5kHz.
If the clock signal is out of the range, the X'tal (X601) should be replaced with new one.
DEH-P770MP/XN/UC
5 6 7 8
59
1 2 3 4
7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 DISASSEMBLY
A
3 3 3
DEH-P770MP/XN/UC
60
1 2 3 4
5 6 7 8
Do not squeeze.
Carriage Mechanism
B C
A
Damper
Lower Frame D
Damper
B Damper
DEH-P770MP/XN/UC
5 6 7 8
61
1 2 3 4
C Washer
Pickup Lock Arm
Feed Screw
E
Inner Holder
Planet Gear
DEH-P770MP/XN/UC
62
1 2 3 4
REAR OUTPUT
SUBWOOFER OUTPUT
NON FADING OUTPUT
5
5
SW F 16 14 12 10 8 6 4 2
15 13 11 9 7 5 3 1
8 9 10 11
5 6 7
6
6
1 2 3 4
10A
ANTENNA JACK FRONT OUTPUT POWER SUPPLY,SPEAKER OUTPUT IP-BUS WIRED REMOTE
CONTROL
7.1.2 CONNECTOR FUNCTION DESCRIPTION
DEH-P770MP/XN/UC
6. B.REM 14. FR- 6. GND
7
7
8
63
E
A
D
C
F
B
1 2 3 4
7.2 IC
* PD8135A(DEH-P770MP),*PD8136A(DEH-P7700MP,P7750MP)
A19 3 42 A9
A8 4 41 A10
A7 5 40 A11
A6 6 39 A12
A5 7 38 A13
B
A4 8 37 A14
A3 9 36 A15
A2 10 35 A16
C D0 15 30 D7
D8 16 29 D14
D1 17 28 D6
D9 18 27 D13
D2 19 26 D5
D10 20 25 D12
D3 21 24 D4
D D11 22 23 AVCC
NJM2388F84
DEH-P770MP/XN/UC
64
1 2 3 4
5 6 7 8
- Pin Functions(PE5454A)
Pin No. Pin Name I/O Format Function and Operation
1 AVREF A power supply Positive power supply(5V)
2 AVSS A power supply GND A
3 RFOK O C Output of state of RFOK
4 NC Not used
5 EVDD E power supply Positive power supply
6, 7 NC Not used
8 IC/FLMD0 IC : VSS direct connection/FLMOD0 : Pull-down
9 VDD Positive power supply(5V)
10 REGC Connected to the capacity stabilizing output of the regulator
11 VSS GND
12 X1 I Oscillator connection for mainclock
13 X2 Oscillator connection for mainclock
14 reset I System reset input
B
15 XT1 I Connected to the oscillator for subclock
(connected to VSS via the resistor)
16 XT2 Connected to the oscillator for subclock(Open)
17 NC Connected to EVDD or EVSS via the resistor
18 NC Not used
19 xint C CD LSI interruption signal input
20 NC Connected to VSS via the resistor
21 brst I P-Bus reset input
22 BSI I P-Bus serial data input
23 BSO O C P-Bus serial data output
24 bsck I/O /C P-Bus serial clock input/output
25 FTXD O C For flash rewriting(transmitted signal)
C
26 FRXD I For flash rewriting(received signal)
27 BRXEN I/O /C It is possible to receive P-Bus
28 bsrq I/O /C P-Bus service request demand
29 NC Not used
30 DSCSNS I Disc state sense input
31 8EJ(S905) I Input of detection of 8 cm disc ejection
32 12EJ(S904) I Input of detection of 12 cm disc ejection
33 EVSS E power supply GND
34 EVDD E power supply Positive power supply
35, 36 SRAMLEVEL0, 1 O C SRAM level meter output
37 EMPH O C Emphasis information output
38 emph O C Emphasis information output D
39-42 NC Not used
43 adena O C A/D reference voltage supply control output
44 LRCKOK O C (DOUT mute output)
45 SRAMLEVEL2 O C SRAM level meter output
46 CD3VON O C CD +3.3V power supply control output
47 CONT O C Servo driver power supply control output
48 xrst O C CD LSI reset control output
49 VDCONT O C VD power supply control output
50 ROMDATA I/O /C E2PROM data input/output
51 ROMCS O C E2PROM chip selection output
52 ROMCK O C E2PROM clock output
53 LOEJ O C The direction change output of LOAD/EJECT E
54 CLCONT O C Driver input change output
55 CDMUTE O C CD mute control output
56-58 NC Not used
59 xcs O C CD LSI chip selection output
60 NC Not used
61 xwait I CD LSI write control signal output
62 CLKOUT O C Internal system clock output(Open)
63 LOCK I Spindle lock input
64 NC Not used
65 xwrite O CD LSI write control signal output
66 NC Not used
F
DEH-P770MP/XN/UC
5 6 7 8
65
1 2 3 4
* PE5454A
Format Meaning
51
75
C CMOS
76 50
100 26
25
1
DEH-P770MP/XN/UC
66
1 2 3 4
5 6 7 8
A
- Pin Functions(PEG070A)
Pin No. Pin Name I/O Function and Operation
1 SYSPW O System power control output
2 KEYD I Key data input
3-5 NC Not used
6 BYTE I External data bus width change input
7 CNVSS I Processor mode change input
8 TELIN I TEL : Cellular mute input
9 NC Not used
10 reset I Reset input
11 XOUT O Clock output
12 VSS GND B
13 XIN I Clock input
14 VCC I Power supply input
15 NMI I NMI input
16-18 NC Not used
19 RX2 I IPBUS : Input 2
20 OELPW O OEL power supply output
21 NC Not used
22 PEE O PEE sound output
23 NC Not used
24 brst O P-BUS : Reset output
25 brxen I/O P-BUS : Reception enable input/output
C
26 brsq I P-BUS : Service request input
27 RX I IPBUS : Input
28 TX O IPBUS : Output
29 BSO O P-BUS : Serial data output
30 BSI I P-BUS : Serial data input
31 BSCK O P-BUS : Serial clock output
32 NC Not used
33 DPDT O GRILLE : Data output
34 KYDT I GRILLE : Data input
35, 36 ROT1, 0 I Rotary encoder pulse input1, 0
37 PCL O Output for clock adjustment
38 SWVDD O GRILLE : Chip enable output D
39 dsens I Detach sense input
40 FLPILM O Illumination output inside flap
41 ILMPW O Illumination output
42 ejtin I Eject key input
43-55 NC Not used
56 CONT O S10 : Servo driver control output
57 EMUTE O EVOL : Mute output
58,59 NC Not used
60 VCC Power supply input
61 NC Not used
62 VSS GND
63-66 NC Not used E
67 DALMON O For consumption current reduction output
68 NC Not used
69 tunpce@ O TUNER : Chip enable output(EEPROM)
70 TUNPCE1 O TUNER : Chip enable output(PLL)
71 romcs O ROM correction : Chip select output
72 asens I ACC sense input
73 bsens I Back up sense input
74 ROMCK O ROM correction : Clock output
75 ROMDATA I/O ROM correction : Data input/output
76 VST O EVOL : Strobe output
77 VDT O EVOL : Data output
F
78 VCK O EVOL : Clock output
DEH-P770MP/XN/UC
5 6 7 8
67
1 2 3 4
C
* PEG070A
50
26
51 25
75 1
100
76
DEH-P770MP/XN/UC
68
1 2 3 4
5 6 7 8
DEH-P770MP/XN/UC
5 6 7 8
69
1 2 3 4
50
26
A N Nch open drain
51 25
75 1
B
100
76
NJM2885DL1-33
Thermal
Protection
C
-+
Bandgap
Reference
1 2 3
D
IN GND OUT
NJM2391DL1-05
E
+-
VREF
F
1 2 3
IN GND OUT
DEH-P770MP/XN/UC
70
1 2 3 4
5 6 7 8
- Pin Functions(UPD63763GJ)
Pin No. Pin Name I/O Function and Operation
1 D.VDD Power supply for digital circuits
2 D1.GND GND for 1.6V digital circuits A
3 reset I Input of reset
4-8 AB12-8 I Address bus 12-8 from the microcomputer
9-16 AD7-0 I/O Address/data bus 7-0 to the microcomputer
17 cs I Chip selection
18 ASTB I Address strobe
19 read I Control signals(read)
20 write I Control signals(write)
21 wait O Control signals(wait)
22 INTQ O Interruption signals to the external microcomputer
23, 24 IFMODE0, 1 I Switching the microcomputer I/F 0, 1
25 D1.VDD Power supply for 1.6V digital circuits
B
26 DA.VDD Power supply for DAC
27 ROUT O Output of audio for the right channel
28 DA.GND GND for DAC
29 REGC Connected to the capacitor for band gap
30 DA.GND GND for DAC
31 LOUT O Output of audio for the left channel
32 DA.VDD Power supply for DAC
33 X.VDD Power supply for the crystal oscillator
34 XTAL I Connected to the crystal oscillator(16.9344MHz)
35 xtal O Connected to the crystal oscillator(16.9344MHz)
36 X.GND Ground for the crystal oscillator
37 VDDREG15 Control of 1.6V regulator
C
38 PWMSW0 I Setup 0 for PWM output(SD, MD)
39-41 TEST3-1 I Connected to GND
42 PWMSW1 I Setup 1 for PWM output(FD, TD)
43 TESTEN I Connected to GND
44 D1.GND GND for 1.6V digital circuits
45 DIN I Input of audio data
46 DOUT O Output of audio data
47 SCKIN I Clock input for audio data
48 SCKO O Clock output for audio data
49 LRCKIN I Input of LRCK for audio data
50 LRCK O Output LRCK for audio data
51 xtalen I Permission to oscillate 16.9344MHz D
52 D1.VDD Power supply for 1.6V digital circuits
53 RFCK/HOLD O Output of RFCK/HOLD signal
54 WFCK/MIRR O Output of WFCK/MIRR signal
55 PLCK/RFOK O Output of PLCK/Output of RFOK
56 LOCK/RFOK O Output of LRCK/Output of RFOK
57 C1D1/C8M O Information on error correction/C8M : 8MHz
58 C1D2/C16M O Information on error correction/C16M : 16MHz
59 C2D1/RMUTE O Information on error correction/Mute for Rch
60 C2D2/LMUTE O Information on error correction/Mute for Lch
61 C2D3/SHOCK O Information on error correction/Detection of vibration
62 D1.GND GND for 1.6V digital circuits
63 C33M O Output of 33.8688MHz(CLK for SDRAM) E
64 (rcs) O DRAM cs
65 RA11 O Output of DRAM address 11
66 (CKE) O Output of DRAM CKE
67 ras O Output of DRAM ras
68 cas)(LDQM) O Output of DRAM lower cas(LDQM)
69 cas!(UDQM) O Output of DRAM upper cas(UDQM)
70 we O Output of DRAM we
71 oe(cas) O Output of DRAM oe(cas)
72 D.GND Ground for digital circuits
73-88 RDB0-15 I/O Input/output of DRAM data0-15
89-99 RA0-10 O Output of DRAM address0-10
F
DEH-P770MP/XN/UC
5 6 7 8
71
1 2 3 4
* UPD63763GJ
108
73
E
109 72
144 37
F
1
36
DEH-P770MP/XN/UC
72
1 2 3 4
5 6 7 8
7 6 13 5 10 9 8 11 14 18 19 20 21
RDS_DATA
WC
CE2
ROM_VDD
SL
DI
CK
CE1
LDET
DO
RDS_CK
RDS_LOCK
RDS_HSLK
A
ATT RF LPF
VDD_3.3
RFGND
DGND
VCC
2 12 15 4 17
DEH-P770MP/XN/UC
5 6 7 8
73
1 2 3 4
A
Power ON
VCC=5V
Pin 14
bsens
Pin 73
B
bsens=L
asens
Pin 72
asens=L
dsens
Pin 39
C
dsens=L
ASENBO←H
Pin 80
CSENS
- CSENS <= 2V, 3V <
= CSENS
Pin 91 Last source returns.
2V < CSENS < 3V CD loading functions are available.
Starts Keys except for EJECT key are not available.
D communication
with Grille
microcomputer. 300ms
SWVDD←H
Pin 38 300ms
In case of the above signal, the communication
Source keys with Grille microcomputer may fail.
operative If the time interval is not 300msec, the oscillator
may be defective.
E
Source ON
SYSPW←H
Pin 1
DEH-P770MP/XN/UC
74
1 2 3 4
5 6 7 8
7.4 CLEANING
A
Before shipping out the product, be sure to clean the
following portions by using the prescribed cleaning
tools:
Portions to be cleaned Cleaning tools
CD pickup lenses Cleaning liquid : GEM1004
Cleaning paper : GED-008
DEH-P770MP/XN/UC
5 6 7 8
75
1 2 3 4
8. OPERATIONS
DEH-P770MP/XN/UC
76
1 2 3 4
5 6 7 8
DEH-P770MP/XN/UC
5 6 7 8
77
1 2 3 4
DEH-P770MP/XN/UC
78
1 2 3 4
5 6 7 8
DEH-P770MP/XN/UC
5 6 7 8
79
1 2 3 4
DEH-P770MP/XN/UC
80
1 2 3 4
5 6 7 8
DEH-P770MP/XN/UC
5 6 7 8
81
1 2 3 4
DEH-P770MP/XN/UC
82
1 2 3 4
5 6 7 8
Fixing Screw
BPZ20P060FZK (UC model) E
CXX1646 (ES model)
DEH-P770MP/XN/UC
5 6 7 8
83
F
E
B
A
D
C
84
Power amp
(sold separately)
Connecting cords with RCA pin
plugs (sold separately)
IP-BUS input (Blue) Rear output Power amp
1
1
Multi-CD player
IP-BUS cable (sold separately)
Blue/white
To system control terminal of the power amp or
2
2
DEH-P770MP/XN/UC
Red White Gray
+ +
3
3
+ +
4
4
DEH-P770MP/XN/UC
5 6 7 8
85
1 2 3 4
- Jigs List
Name Jig No. Remarks
A Test Disc TCD-784 Checking
g the g
grating
g
L.P.F. Checking
g the g
grating
g ((Two pieces))
DEH-P770MP/XN/UC
86
1 2 3 4