Professional Documents
Culture Documents
Materials
Material Required
Helmet Model
Mold Release Wax
Gelcoat
Hardener
Fibre Glass Sheet
Fibre Glass Resin
Latex Gloves
Disposable Cups And Stirrers
Cutter
Brushes
Aluminium Roller
Acetone
Catalyst
Manufacturing Procedure
Mould makig.
Spred wax over helmet model exterior.
Mix catalyst into gelcoat mix.
Take gelcoat mix and brush it on first layer.
Also apply second gelcoat layer.
Mix catalyst into resin.
Spred resin over the area to be fibreglassed.
Then layout fiberglass.
Now mold cavity is prepared.
Spread mold release wax in mold cavity.
Applay first coat of fibre glass resin.
Then apply second resin layer.
Place another layer of fibre glass.
Take out the model helmet from mold cavity.
Product is prepared.
Applications
Composite material provides strength to the helmet.
Helmet made up of composite material is lighter in weight.
This helmet provides safety to a driver.
Helmet has more flexibility therefore it reduces the harm.