Professional Documents
Culture Documents
Extended End-Plate Stiffener PDF
Extended End-Plate Stiffener PDF
If you’ve ever asked yourself “why?” about something related to structural steel design or construction, Modern
Steel Construction’s monthly Steel Interchange column is for you! Send your questions or comments to solutions@aisc.org.
The required depth of plug welds is a function of the thickness The opinions expressed in Steel Interchange do not necessarily represent an official
position of the American Institute of Steel Construction and have not been reviewed. It is
of the doubler plate as defined in Section 2.3.5.4 of AWS D1.1. recognized that the design of structures is within the scope and expertise of a competent
Up to 5∕8-in. plate thickness, the full thickness must be filled. Over licensed structural engineer, architect or other licensed professional for the application of
principles to a particular structure.
5
∕8-in. plate thickness, half the thickness or 5∕8 in. must be filled,
If you have a question or problem that your fellow readers might help you solve, please
whichever is greater. In all cases, the filled thickness need not forward it to us. At the same time, feel free to respond to any of the questions that you
exceed the thickness of the thinner part joined. have read here. Contact Steel Interchange via AISC’s Steel Solutions Center: