Material Composition : Fiberglass Duct Insul board insulation composed of glass processed from the molten state into fibrous form and bonded with an organic binder. Density : 48 kg/m3 (Tolerances: + 15%) Facing : Faced with FSK (Aluminium Foil/Scrim/Kraft Paper laminate) Dimension (a) Length : 1.0 m (tolerances: +12mm) (b) Width : 1.2 m ((tolerances: +6mm) (c) Thickness : 25 mm (tolerance: -3mm; +6mm) Thermal Conductivity : <0.032 W/m.K at 24 oC mean temperature Maximum use temperature : Fiber - 232 oC; Facing - 100 oC Compression Strength : > 1.2 KPa at 10% deflection Linear Shrinkage : Less than 1 % Water vapor absorption : Less than 1 % by volume Surface Burning Characteristics (a) Flame Spread index : < 25 (b) Smoke developed index : < 50 Odor Emission : No detectable odor of objectionable nature was observed Corrosiveness to Steel : No Corrosion Stress Corrosion to Austenitic No Cracking observed ; pH > 9.5 Stainless Steel : Rigidity : Semi-rigid Non-fibrous (shot) Content : Not applicable Standard Compliance : ASTM C 612 Type IA & IB All information and data mentioned in this technical data sheet are based on tests performed in the laboratory. Nothing herein to be construed as a warranty or representation and we recommend, However, that all potential users of the product make their own actual tests prior to using it on industrial scale. KIMMCO Duct Insul (KDI) Product Technical Data Sheet Material Composition : Fiberglass Duct Insul board insulation composed of glass processed from the molten state into fibrous form and bonded with an organic binder. Density : 48 kg/m3 (Tolerances: + 15%) Facing : Faced with FSK (Aluminium Foil/Scrim/Kraft Paper laminate) Dimension (a) Length : 1.0 m (tolerances: +12mm) (b) Width : 1.2 m ((tolerances: +6mm) (c) Thickness : 50 mm (tolerance: -3mm; +6mm) Thermal Conductivity : <0.031 W/m.K at 25 oC mean temperature Maximum use temperature : Fiber - 232 oC; Facing - 100 oC Compression Strength : > 1.2 KPa at 10% deflection Linear Shrinkage : Less than 1 % Water vapor absorption : Less than 1 % by volume Surface Burning Characteristics (a) Flame Spread index : < 25 (b) Smoke developed index : < 50 Odor Emission : No detectable odor of objectionable nature was observed Corrosiveness to Steel : No Corrosion Stress Corrosion to Austenitic No Cracking observed ; pH > 9.5 Stainless Steel : Rigidity : Semi-rigid Non-fibrous (shot) Content : Not applicable Standard Compliance : ASTM C 612 Type IA & IB All information and data mentioned in this technical data sheet are based on tests performed in the laboratory. Nothing herein to be construed as a warranty or representation and we recommend, However, that all potential users of the product make their own actual tests prior to using it on industrial scale. MATERIALS SAFETY DATA SHEET (MSDS)