Professional Documents
Culture Documents
Transmission Hydraulic Control Valves PDF
Transmission Hydraulic Control Valves PDF
Page 1 of 7
Shutdown SIS
Previous Screen
REG009480021
2. Remove bolts (3), then remove cover (4) from the pressure control valve.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 9/1/2020
950 WHEEL LOADER 81J07846-UP (MACHINE) POWERED BY 3304 ENGINE(SEB... Page 2 of 7
3. Remove piston (5), two springs (7), valve spool assembly (6), plug (8) and slug (9).
4. Remove snap ring (10), retainer (13), spring (11), plunger (14), retainer (12) and shims (15) from
valve spool (6).
5. Remove stop (16), two springs (18), washer (17) and valve spool (19) from the pressure control
valve.
6. Remove valve spool (20), spring (22) and slug (21) from the pressure control valve.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 9/1/2020
950 WHEEL LOADER 81J07846-UP (MACHINE) POWERED BY 3304 ENGINE(SEB... Page 3 of 7
7. Turn pressure control valve around and remove bolts (23) and cover (24).
8. Remove plug (25) and valve spool (26) from the pressure control valve.
NOTE: Make an identification of the selector control valves spools and their respective bores.
10. Remove selector control valve (28) from the manifold (29).
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 9/1/2020
950 WHEEL LOADER 81J07846-UP (MACHINE) POWERED BY 3304 ENGINE(SEB... Page 4 of 7
11. Remove O-ring seal (30) from the selector control valve. Remove two selector control valve
spools (31) from the selector control valve body.
1. Install a new O-ring seal (2) on the selector control valve body. Install two selector valve spools (1)
in the valve body.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 9/1/2020
950 WHEEL LOADER 81J07846-UP (MACHINE) POWERED BY 3304 ENGINE(SEB... Page 5 of 7
4. Install valve spool (7) and plug (6) in the pressure control valve body.
5. Install cover (9) and the bolts (8) that hold it on the pressure control valve body. Tighten the bolts
to a torque of 22 ± 3 lb.ft. (28 ± 4 N·m).
6. Turn the pressure control valve body around. Install slug (11), spring (12) and valve spool (10) in
the pressure control valve body.
7. Install valve spool (16), washer (14), two springs (13) and stop (15) in the pressure control valve
body.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 9/1/2020
950 WHEEL LOADER 81J07846-UP (MACHINE) POWERED BY 3304 ENGINE(SEB... Page 6 of 7
9. Install plunger (22), spring (18), retainer (21) and snap ring (17) in valve spool (19).
10. Install slug (27), plug (26), valve spool assembly (19), two springs (25) and piston (24) in the
pressure control valve body.
11. Install new O-ring seals (29) on cover (28), then install cover (28) on pressure control valve body
with the bolts that hold it. Tighten the bolts to a torque of 22 ± 3 lb.ft. (28 ± 4 N·m).
12. Install pressure control valve (30) on the manifold with the bolts that hold it.
13. Make adjustments to the transmission hydraulic controls after the transmission is installed in the
machine. See POWER SHIFT TRANSMISSION TESTING AND ADJUSTING.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 9/1/2020
950 WHEEL LOADER 81J07846-UP (MACHINE) POWERED BY 3304 ENGINE(SEB... Page 7 of 7
end by:
Copyright 1993 - 2020 Caterpillar Inc. Thu Jan 9 22:21:50 EST 2020
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 9/1/2020