Professional Documents
Culture Documents
Group 8 Turning Joint: 1. Removal and Install
Group 8 Turning Joint: 1. Removal and Install
2) INSTALL
(1) Carry out installation in the reverse order
to removal. 1
Ɠ Take care of turning joint direction.
Ɠ Assemble hoses to their original positions.
Ɠ Confirm the hydraulic oil level and check
the hydraulic oil leak or not.
8-117
2. DISASSEMBLY AND ASSEMBLY
1) STRUCTURE
3 6 10
15
16
14
12, 13
11
8-118
2) DISASSEMBLY
15
(1) Before the disassembly, clean the turning
16
joint.
Remove bolts(15), washer(16) and cover 3
(3).
Work bench
8-119
3) ASSEMBLY
Ɠ Clean all parts.
Ɠ As a general rule, replace oil seals and O-
ring.
Ɠ Coat the sliding surfaces of all parts with
engine oil or grease before installing.
8-120
(7) Install cover(3) to hub(1) and tighten
bolts(15). 15
şTorque : 10 ~ 12.5kgfşm(72 ~ 90lbfşft) 16
3
8-121