Professional Documents
Culture Documents
com
Padeyecalculator.com
The calculator above can be used to determine the required geometry of a structural
sound and safe pad eye. By lling in the required minimum breaking load and
dimensions it calculates the axial/bending, shear and equivalent stress in the
sections A-A and B-B.
Any in-plane angle α is allowed, the governing angle α being +/- β is veri ed;
Material of the pad eye is steel with a minimum yield stress as speci ed in the
calculation;
The pin of the shackle has a loose t in the pad eye, causing additional bending in
the sections;
Hertz bearing stress is assumed not to be signi cant since it is no failure
mechanism;
The weld of the base of the pad eye, bottom part in the gure above the calculator,
is also required to be veri ed in another calculation.
Application of padeyecalculator.com
Among others the formulas are applicable for steel pad eyes as used in the elds of:
Building construction
Civil construction
O shore construction
When using the calculator above you agree that the makers of this website and
calculation sheet, or any of their companies or the companies they work for, are not
and cannot be hold responsible for any mistakes in the formulas or any
misinterpretation of the applicability of the formulas.
Although the calculations and tekst have been set up with great care it is possible
that there are mistakes in the calculations or tekst. Using the calculation results is
done on your own risk.
Other calculators:
Sectioncalculator.com
Bucklingcalculator.com