Professional Documents
Culture Documents
0 AH
Features
• Absorbent Glass Mat (AGM) technology for superior
performance
• Valve regulated, spill proof construction allows safe
operation in any position
• Power/volume ratio yielding unrivaled energy density
• Rugged impact resistant ABS case and cover (UL94-HB)
• Integrated ABS carrying handles for ease of movement
• Approved for transport by air. D.O.T., I.A.T.A., F.A.A.
and C.A.B. certified
• U.L. recognized under file number MH 20845
Terminals: in (mm)
U: Positive Terminal U: Negative Terminal
Performance Specifications
17.4 15.9
• U: Universal
Nominal Voltage........................................................12 volts (6 cells)
10
10
terminals: Heavy-duty
18
18
Nominal Capacity
22
22
8.5
9
w. 6 mm stud fastener T6 16
5-hr. (15.8A to 10.20 volts) ............................................ 79.0 AH
M6
1-hr. (55.2A to 9.00 volts) .............................................. 55.2 AH
6
15-min. (175A to 9.00 volts)................................................. 43.8 AH
Physical Dimensions: in (mm) Approximate Weight ...................................... 68.00 lbs. (30.84 kg)
Energy Density (20-hr. rate) .............. 1.86 W-h/in3 (113.45 W-h/l)
Specific Energy (20-hr. rate) ............. 17.65 W-h/lb (38.91 W-h/kg)
Internal Resistance (approx.) ........................................ 5 milliohms
W
Max Discharge Current (7 Min.) .............................. 300.0 amperes
Max Short-Duration Discharge Current (10 Sec.)... 750.0 amperes
Shelf Life (% of nominal capacity at 68°F (20°C)
1 Month .................................................................................. 97%
5
S ealed R echargeable
13340 01063
B attery
HT 3 Months................................................................................. 91%
H
8
MO DE L P S -121000 U
12 Volt 100.0 Amp. Hr.
6 Months ................................................................................ 83%
R echargeable S ealed L ead-Acid B attery
DC power, cons tant voltage charge
US T B E R
Warning: MH20845
121000910211 NONS P IL L A B L E
R is k of fire, explos ion, or burns .
Do not dis as s emble, heat above 60 C , or incinerate.
To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.
All data subject to change without notice. www.power-sonic.com
®
PS-121000 12 Volt 100.0 AH
5 Final
Discharge Time
11.0
Voltage
10.5V
2 10 5.0
10.0
10.2V 20
1 50
9.0
Final
9.6V 100
Voltage
30 8.0
200
min
9.0V o o
1.2 2.4 6 12 24 36 48 1 2 4 6 8 10 20 4 0
10 40 C (104 F)
o o
20 C (68 F)
min h
o o
0 C (32 F) Discharge Time
5 8.1V
Charging is not
necessary unless
100% of capacity
is required.
Charging 80
5oC Charging before
use is necessary
Cycle Applications: Limit initial current to 20A. Charge until battery voltage (under (41oF) to help recover
charge) reaches 14.4 to 14.7 volts at 68°F (20°C). Hold at 14.4 to 14.7 volts full capacity.
until current drops to under 1A. Battery is fully charged under these conditions, and 60
charger should be disconnected or switched to “float” voltage. Charge may fail
o to restore full
40oC 30 C 20oC capacity. Do not
“Float” or “Stand-By” Service: Hold battery across constant voltage source of 13.5 40 (104oF)
o
(86 F) (68oF) let batteries reach
this state.
to 13.8 volts continuously. When held at this voltage, the battery will seek its own
current level and maintain itself in a fully charged condition. 0
0 2 4 6 8 10 12 14 16 18 20
Note: Due to the self-discharge characteristics of this type of battery, it is imperative Standing Period (Months)
that they be charged within 6 months of storage, otherwise permanent loss of
capacity might occur as a result of sulfation.
CORPORATE OFFICE • 7550 Panasonic Way • San Diego, CA 92154 • USA • Tel: +1-619-661-2020 • Fax: +1-619-661-3650 0816 1M
© 2016. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.