Professional Documents
Culture Documents
Inner ring
Diameter series
> ≤ U L U L L
mm μm μm μm μm μm μm μm μm
10 18 0 –5 5 4 3 0 –80 –250 5 4 7 7
18 30 0 –6 6 5 3 0 –120 –250 5 4 8 8
30 50 0 –8 8 6 4 0 –120 –250 5 5 8 8
50 80 0 –9 9 7 5 0 –150 –250 6 5 8 8
Outer ring
Diameter series
> ≤ U L 7, 8, 92) 0, 1, 2, 3, 4
mm μm μm μm μm μm μm μm μm
2,5 18 0 –5 5 4 3 Identical to 5 5 4 8
tΔBsof an
18 30 0 –6 6 5 3 5 6 4 8
inner ring of
30 50 0 –7 7 5 4 the same 5 7 4 8
bearing as the
outer ring
50 80 0 –9 9 7 5 6 8 4 10
3) Applies to groove ball bearings only, except for self-aligning ball bearings.
4) Applies to inner rings and outer rings of bearings of matched bearing sets consisting of two or more bearings. Does not apply to
universally matchable angular contact ball bearings.
6) Tolerance values have become half the values in accordance with the revised ISO standard (2014) because SD is defined as
perpendicularity of outer ring outside surface axis with respect to datum established from the outer ring face.