Professional Documents
Culture Documents
Previous Screen
Welcome: r40bgjv
Product: GENERATOR SET
Model: C9 GENERATOR SET C9E
Configuration: C9 Generator Set C9E00001-UP
Troubleshooting
C9 Generator Set Engines
Media Number -RENR9881-08 Publication Date -01/07/2017 Date Updated -21/07/2017
i02433393
Factory Passwords
SMCS - 0785
NOTICE
Operating the engine with a flash file not designed for that engine will
damage the engine. Be sure the flash file is correct for your engine.
Program a new Electronic Control Module (ECM). When an ECM is replaced, the system configuration
parameters must be programmed into the new ECM. A new ECM will allow these parameters to be
programmed once without factory passwords. After the initial programming, some parameters are
protected by factory passwords.
Clear event codes. Most event codes require the use of factory passwords to clear the code once the code
has been logged. Clear these codes only when you are certain that the problem has been corrected.
Unlock parameters. Factory passwords are required in order to unlock certain system configuration
parameters. Refer to Troubleshooting, "System Configuration Parameters".
Since factory passwords contain alphabetic characters, the Caterpillar Electronic Technician (ET) must be used
to perform these functions. In order to obtain factory passwords, proceed as if you already have the password. If
factory passwords are needed, Cat ET will request the factory passwords and Cat ET will display the
information that is required to obtain the passwords. For the worksheet that is used for acquiring factory
passwords, refer to programming parameters Troubleshooting, "Factory Passwords Worksheet".
Copyright 1993 - 2019 Caterpillar Inc. Sun Apr 21 2019 11:24:09 GMT-0400 (hora de Venezuela)
All Rights Reserved.
r40bgjv
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/… 1/1