Professional Documents
Culture Documents
Previous Screen
Welcome: r40bgjv
Product: TRUCK ENGINE
Model: 3126 TRUCK ENGINE 6PZ
Configuration: 3126B Truck Engine Military 6PZ00001-UP
Specifications
3126B Truck Engine
Media Number -SENR9522-01 Publication Date -01/03/2006 Date Updated -14/03/2006
i01675931
Exhaust Manifold
SMCS - 1059
NOTICE
Excessive use of sealant can cause damage to components.
Use the following procedure during assembly of the three-piece exhaust manifold to the cylinder block.
1. Mounting surfaces should be clean, and dry. In addition, mounting surfaces should be free of any other
foreign matter.
2. Apply 2P-2333 High Temperature Sealer to the outside diameter of the male ends of the exhaust manifold.
Do not apply the sealer at the tip of the male ends. Remove any excess sealer from the assembled joint.
Illustration 1 g00291084
Three-piece exhaust manifold
Typical example
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/… 1/2
26/5/2019 3126B Truck Engine Military 6PZ00001-UP(SEBP3020 - 19) - Documentation
3. Apply 5P-3931 Anti-Seize Compound to the threads of bolt (1) through bolt (12) .
Tighten the bolts to the following torque. ... 4 ± 1 N·m (35 ± 9 lb in)
Tighten the bolts to the following torque. ... 45 ± 5 N·m (33 ± 4 lb ft)
6. Lock the tabs and bend the tabs (13) over the flat of the bolt heads.
Note: Prior to starting or running the engine, allow the sealant in the exhaust manifold joints to air dry for 24
hours.
Copyright 1993 - 2019 Caterpillar Inc. Sun May 26 2019 10:26:05 GMT-0400 (hora de Venezuela)
All Rights Reserved.
r40bgjv
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/… 2/2