Professional Documents
Culture Documents
AUTO START
DEEP SEA ELECTRONICS PLC
SYNC/LOAD SHARE
MODULE
Issue 6
VH 18/01/02
FEATURES DESCRIPTION
Shock
PC based configuration software allows BS EN 60068-2-27 Three half sine
for fast, simple and secure configuration shocks in each of the three major axes
of module parameters. Utilising the P810 15gn amplitude. 11mS duration.
interface to provide a safe isolated link to
the PC, changes can easily be made to Electrical Safety
the system by authorised personnel. BS EN 60950 Low Voltage
Access is PIN number protected. Directive/Safety of information
Complex configurations can be saved technology equipment, including
and loaded from disk or output to a electrical business equipment.
printer for reference. Diagnostic facilities
allow for fault finding and monitoring
during test and installation.
CASE DIMENSIONS
144.0mm
137mm 157
808
CE
110.0mm 185.0mm
192.0mm
TYPICAL CONNECTIONS
LOAD
L1 L2 L3 N NOTE:-
When connected to a
Refer to Operators Manual for further Information completed Panel / Gen-set
Real-time diagnostic display
is available
810
Configuration
252627 36 35 40 39 38 30
29 34 33 32 31
Generator Loading FCC68 - 4 Way FCC68 - 8 Way
Request Relay
Generator Loading
Relay
1 2 3 5 4 8 20 21 22 24 23 9 10 11 12 13 14 15 16 17 6 7 18 19
4
Oil Temp
F F Sender Sender
MPU
5
These Ground connections must be
on the engine block and must
be a sound electrical connection 6
to the sender bodies.
The wire to Terminal 24 must not 7 Configurable inputs
be used to provide a ground 8
connection to any other device
9