Professional Documents
Culture Documents
Brochure PDF
Brochure PDF
2600
SectionNo.No.
Section 4.1.a
4.1.a
Series
WellMark Series Series
Series 2600
2600
Flanged Safety
Relief Valve
pressure only on the downstream side, and are not intended for use
in a closed system. Any backpressure applied to the downstream
side of the valve will result in improper pressure relief.
Features
Features
• Choice Of Multiple Orifice Sizes
• Choice Of Multiple Orifice Sizes
• ASME Coded: “UV” Section VIII Air/Gas and Liquid
• ASME Coded: “UV” Section VIII Air/Gas and Liquid
• Enhanced Guided Lift System: Optimum Performance
• Enhanced Guided Lift System: Optimum Performance
• Trim Option: Soft Seat
• Trim Option: Soft Seat
• High Volume Applications
• High Volume Applications
• Low Pressure Applications
• Low Pressure Applications
• Stainless Steel Internals
• Stainless Steel Internals
• NACE Option Available
• NACE Option Available
• Flanged and Threaded Connections Available
• Lap Joint Flanges for Easy Alignment
Specifications
Specifications
Type W2601–1" Size
Threaded Safety
Relief Valves
Threaded Safety
Type
Type W2601–1"
W2602–2" Size Size Relief Valves
Type W2602–2"
Soft Resilient SeatSize
Soft Resilient
Multiple SeatAvailable:
Orifices
Multiple Orifices
• C–.295" Available:
Diameter (1" gas valve only)
•
• D–.400" Diameter (1"
C–.295" Diameter (1" gas
valvevalve
only)only)
•
• D–.400" Diameter (1"
E–.534" Diameter (1" orvalve only)
2" valve)
• F–.672"
• E–.534" Diameter
Diameter (1"
(2" or 2" valve)
valve only)
• F–.672" Diameter (2" valve
• G–.857" Diameter (2" valve only) only)
• G–.857" Diameter (2" valve only)
The Company • Oklahoma City, Oklahoma • Tel: (405) 672-6660 • Fax: (405) 672-6661 • wellmarkco.com
The Contact •
Norriseal-WellMark Norriseal-WellMark today
Houston, Texas••Oklahoma
Company Toll-free: City, for more
877.667.6418
Oklahoma •• Tel: information
Fax:(405) 672-6660••about
713.896.7386 Fax: (405)products
672-6661 •and
norrisealwellmark.com services
wellmarkco.com
©2015 The WellMark Company • Litho USA • WM2600-7/15 • All registered trademarks are the property of their respective owners.
NRS_INFO@APERGY.COM • NORRISEALWELLMARK.COM
3
©2017
©2015 Norriseal-WellMark
The WellMark
HOUSTON: • WM2600-10/17
Company
713.466.3552 • •Litho • 432.238.3919
All marks are the
USA • WM2600-7/15
MIDLAND: property
• •All of their
registered
OKLAHOMA respective
trademarks
CITY: areowners.
the property• ofBROUSSARD:
405.672.6660 their respective337.837.3223
owners. • KENEDY: 830.583.8112 3
Due to the continuous improvement program at Norriseal-WellMark, specifications and/or prices are subject to change without notice or obligation. For the most up to date information, please contact us directly
SectionNo.No.
Section 4.1.a
4.1.a
W2601 EV1-311N-300
11 •• CS(WCB)/
CS(WCB)/CSCS(A105)*
(A105)* (-29°F/400°F)
22 •• CS(WCB)/
CS(WCB)/316
316SSS.S.
(-29°F/400°F) Bonnet/Seat
Bonnet /Seat
33 •• S.S. (CF8M)/ 316
SS(CF8M)/316 S.S.
SS (-58°F/400°F) FrameFrame Material
Material Inlet Connection 1 • Male NPT Threaded*
Orifice Designation
Specification
C D E F G
ORIFICE DIAMETER (IN.) 0.295 0.400 0.534 0.672 0.857
ORIFICE AREA (A) (SQ. IN.) 0.068 0.126 0.224 0.355 0.577
INLET SIZE AVAILABLE (IN.) 1/2, 3/4, 1 1/2, 3/4, 1 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 1 1/4, 1 1/2, 2 1 1/2, 2
OUTLET SIZE AVAILABLE (IN.) 1, 1 1/2 1, 1 1/2 1, 1 1/2 , 2 2 2
PRESSURE RANGES (PSIG) 15-2500 15-2500 15-2500 15-1600 75-1000
FLOW COEFFICIENT (K) AIR/GAS 0.859 0.859 0.859 0.859 0.859
FLOW COEFFICIENT (K) LIQUID N/A 0.628 0.628 0.628 0.628
Orifice Service Orifice Diameter Orifice Area (A) Spring Ranges (psig)- Use Upper End of Spring Range
C AIR/GAS 0.295 0.068
15-80 80-250 250-400 400-800 800-1600 1600-2500 —
1" D AIR/GAS&LIQUID 0.400 0.126
E AIR/GAS&LIQUID 0.534 0.224 15-50 50-150 150-300 300-500 500-1000 1000-2500 —
E AIR/GAS&LIQUID 0.534 0.224 15-75 75-250 250-500 500-1200 1200-2500 — —
F AIR/GAS 0.672 0.355 15-40 40-200 200-400 400-800 800-1600 — —
2" G AIR/GAS 0.857 0.577 — 75-100 100-200 200-600 600-1000 1000-1500 —
F LIQUID 0.672 0.355 15-40 40-70 70-200 200-400 400-530 530-800 800-1600
G LIQUID 0.857 0.577 — 75-125 125-250 250-400 400-600 600-1000 1000-1500
Table I – Molecular Weight and Values of C for Gases Relieving Capacity Formula Coefficient Method
Gas M C
AIR 28.97 356
KACP M
ACETYLENE 26.04 345 Q (SCFM) =
AMMONIA 17.03 351
BUTANE 58.12 324
w x 60 T
CARBON DIOXIDE 44.01 345
CHLORINE 70.91 352 A = Effective Flow Area (Orifice Area in sq. in.)
ETHANE 30.07 339
ETHYLENE 28.05 337 C = Gas Constant
FREON 22 86.48 355
HYDROGEN 2.02 356
K = Flow Coefficient
HYDROGEN SULFIDE 34.08 348 M = Molecular Weight
METHANE 16.04 346
METHYL CHLORIDE 50.48 337 P = Flowing pressure (set pressure x 1.1+14 .7 psia)
NATURAL GAS (0.6) 17.40 344
NITROGEN 28.02 356 Q = Flow Rate in SCFM for gases
OXYGEN
PROPANE
32.00
44.09
356
331
T = Absolute temperature in degrees Rankin (˚F + 460)
SULFUR DIOXIDE 64.06 342 w = Density of the gas in lb./ft.3 (Air =.0764 @ 14.7 psia)
Outlet
B Inlet
1 1
7
9
1
2
1
5