Professional Documents
Culture Documents
Implementing Rules and Regulations
Implementing Rules and Regulations
Rules and Regulations governing the Examination, the Registration, and the Practice of Aeronautical
Engineering in the Philippines
PRELIMINARY ARTICLE
Pursuant to the Provisions of Section 7
(g) And (h) of Presidential Decree No. 1570, otherwise known as the "Philippine Aeronautical
Engineering Decree" approved on June 11, 1978, the following Rules & Regulations including the Code of
Professionals Ethics are hereby adopted.
c. Aircraft - Any contrivance now known or hereafter invented, used, or designed for navigation of
or flight in the air (Section 29 of PD 1570). Such contrivance or device can be powered or non-
powered flying machine that is lighter-than-air (Balloon, dirigible), or heavier-than-air with fixed
wing (airplane, glider), or heavier-than-air with rotary wing (Helicopter, auto gyro). This
contrivance can also be winged or finned weapon system (missile, bomb) or any other device
that is designed to operate fully or partly in air and whose motion and flight path is influence or
determined by the combined effects of forces and moments created by its mass, its power
system, and the air, or by its mass and the air if non powered. A spacecraft designed for
operation in the outer space, can be treated as an aircraft while operating in transit within the
limits of the earth's atmosphere.
d. Aircraft Structures - Those parts of an aircraft comprising of what is collectively known as the
airframe which is the framework of the aircraft supports all other components including the
forces acting on the aircraft. The landing gear assembly and the engine mount are considered
parts of the aircraft structures.
f. Aircraft Components - All parts which comprise the basic aircraft. These consist of aircraft
structures, powerplant, instruments, control system, fuel system, accessories, equipment and
others.
g. Aerodynamics - The science that deals with the study of the air in motion and the forces and
moments created on bodies moving relative to the air in. Aerodynamic theories/principles in
general govern the flight of heavier-than-air aircraft which is vertically supported in flight by an
aerodynamic force 'lift' created on its fixed or rotary wing. A light-than-air aircraft, whose bulk
consists mainly of one or more bags/compartments filled with gas that is lighter-than-air is lifted
by a 'buoyant force" (not an aerodynamic force) equal to the weight of the displace air, during
horizontal and maneuvering flights of these two (2) types of aircraft, the resisting aerodynamic
force "drag" created on each aircraft is overcome by the propulsive force "thrust" which may be
generated by a power system discharging a high-velocity exhaust gas Get) or driving a propeller
or a tilted rotary wing, or combination of a jet and a propeller.
h. Aeronautical engineering - The science and technology dealing with study of the
theories/principles of flight and basic engineering science and the application of these
theories/principles to the research and development, manufacture, operation, maintenance,
repair and modification of aircraft and its components. Aeronautical engineering Practice - The
act of rendering or offering to render professional services in aeronautical engineering in the
form of direct work participation, consultancy, supervision, or management, with or without
fee, salary or any other kind of compensation, the professionals services as enumerated in
Section 27 and 28 (b) of PD 1570 can be grouped into four (4) major activity areas;
1. Research and Development - Basic and applied research in fluid mechanics (study of gases
and liquids at rest and motion) particularly on data acquisition and analysis; formulation of
plants, specifications, standards, technique and procedures: preparation of project
feasibility study; design and construction of test equipment and aircraft tooling; and other
research activities leading to or resulting in the development of new or improved aircraft
and/or its components.
Section 3 Seal of the Aeronautical Engineering. A seal shall likewise be used by a registered
aeronautical engineer to authenticate all official documents in the pursuit of his profession. Except
for the inscriptions on the seal in the preceding section, the seal of the aeronautical engineer shall
have the same basic design, meaning, and size as that of the Board. The words "Aeronautical
Engineer" shall be inscribed on the upper portion of the circumference of the seal with the words
"Philippines" on the lower portion of the circumference. Slight below the center of the seal shall be
printed horizontally the full name of the engineer. His corresponding registration number shall also
appear in a horizontal line above his name.
Section 2. Proof of qualification for Examination. The application for examination shall be
supported by evidence showing that the applicant possesses all the qualifications prescribed in
Section 14 of PD lS70. Every applicant shall submit with his application the following supporting
papers:
a. Copy of the transcript of the scholastic records, duly authenticated, showing completion
of the prescribed curriculum leading to the degree of Bachelor of Science in
Aeronautical Engineering from any local institution of learning recognized by the
government of the Philippines, or completion of an equivalent course offered in any
institution of learning in a foreign country. The Board shall deny admission to
examination graduated of aeronautical engineering courses found deficient of the
essential subjects given in the licensure examination.
Section 3. Scope of Examination. The examination shall consist of written test which shall cover the
following subjects with their corresponding relative weights.
a) Aerodynamics 25%
Aircraft Design Fundamentals; Structural Loading Conditions; Structural Analysis and Design of Airframe
Components; Landing Gears, Engine mounts, and other Structural parts; Non-structural components
design
Thermodynamics & Powerplant Design & Operation Fundamentals with Applications to Internal
Combustion Engines, Reciprocating Engines, Aircraft Gas Turbines, Pulsejet and Ramjet, Rocket
Propulsion Systems, and other Aircraft Power Systems
Aircraft Materials and Processes; Methods and Techniques in Repair and Modification in accordance
with Civil Airworthiness Regulations; Manufacturing/Production Processes and Quality Assurance
e) Engineering Economics & Management Laws & Ethics 10%
Principles of Economics and Management as applied to the Aviation Industry; Laws; Rules and
Regulations governing the Practice of Aeronautical Engineering to include PD 1570, Rules and
Regulations with Code of Professional Ethics of the Board of Aeronautical Engineering and others
f) Mathematics 10%
Algebra, Trigonometry, Analytic Geometry, Calculus and Different Equations with Aeronautical
Applications
Section 4. Proof of Qualifications for Exemption from Examination. The application for registration
without examination shall be supported by evidence indicating that the applicant possesses all the
qualifications prescribed in Sections 14 and 20 of PD 1570. Every application shall include the following
supporting papers:
Section 2. Services of Aeronautical Engineers. All firms, corporations, offices, education, institution and
agencies, whether government or private, whose activities in part or in full involve the operation of one
(1) or more aircraft or the practice of aeronautical engineering shall employ the services of aeronautical
engineers. Planning, design, operation, management or maintenance of airports and their related
facilities, except those activities that belong to other professions regulated by the Commission, shall
require professional aeronautical engineering services. Department/division/unit heads and
deputy/assistant heads of organizations who are directly involved in the decision-making or in the
implementation of aeronautical engineering matters shall be registered aeronautical engineers.
Organizations referred to in the foregoing statement shall include government civilian agencies,
government owned/controlled corporations, educational institutions, and private firms engage in
activities fully or partly involving the practice of aeronautical engineering.
The keystone of professional conduct is integrity. Hence, it behooves the engineer to discharge his
duties with fidelity to the public, his employers and clients, and to be ready to apply his special
knowledge for the benefit of mankind. He should uphold the honor and dignity of his profession and
avoid association with any enterprise or individual of questionable character. In his dealings with fellow
engineers, he should be fair and tolerant.
a. Each and every engineer shall recognize and respect the supreme authority of the State as
expressed through its laws implemented by its agencies, whenever and wherever such laws do
not infringe upon the rights and privileges of citizens as guaranteed by the Constitution.
b. He shall recognize that the well-being of the public and the interest of the State are above the
well-being and interest of any individual.
c. In the interest of justice, he shall aid the State, if and when the technology he is involved in is
needed in the prevention and/or prosecution of unjust, criminal, or unlawful acts.
d. In the interest of good government, he shall extend cooperation to the State in the
accomplishment of its goals and objectives.
e. In the interest of social efficiency, he shall extend assistance, guidance and training to
subordinates under his jurisdiction in order to increase their skill and ability, knowledge and
experience for purposes of eventually increasing their responsibilities.
f. In the interest of national economy and well-being, he shall always strive in the execution of his
work for optimum efficiency, economy, and safety.
g. In the interest of national security, the State shall be given primary consideration in all his
inventions and/ or devices on aeronautical science and technology useful for national security
and defence.
h. In the event of any national emergency, he shall offer his technology, skill, ability, and
experience to the services of the State, even if it will involve personal sacrifices.
a. He shall interest himself in public welfare and be ready to apply his special knowledge for the
benefit of mankind.
b. He shall guard against conditions that are dangerous or threatening to life, limb, or property on
the work for which he is responsible, or if he is not responsible, he shall promptly call such
conditions to the attention of those responsible so that the conditions can immediately and
effectively be corrected.
c. He shall have due regard for the safety of life and health of the public who may be affected by
the work for which he is responsible.
d. He shall endeavor to extend public knowledge of aeronautical engineering and he shall strive to
win or maintain the public confidence by discouraging the spread of untrue, unfair, and
exaggerated statements regarding his profession.
e. As a witness before a court, commission, and/or other tribunal, he shall express an opinion only
when it is founded on adequate and honest conviction.
f. He shall not issue statements on matters connected with public policy, and ex-parte statements,
criticisms, or arguments which are inspired or paid for by private interest, unless he identifies on
whose behalf he is making the statements.
g. He shall refrain from expressing in public any opinion on an engineering subject unless he is fully
familiar and knowledgeable with all facts relating to the subject.
h. His integrity shall be unquestionable and he shall discharge his duties and responsibilities with
fidelity to the public, his employers, and clients and with fairness and impartiality to all.
a. He shall act in professional matters as a faithful agent or trustee, and treat as confidential all
matters and information concerning business affairs, technical processes, and others, of his
clients and/or employers.
b. He shall inform his client or employer of any financial interest on inventions, equipment, and/or
any other device, before undertakinq any engagement in which he may be called upon to decide
on the use thereof.
c. He shall not accept any other compensation, financial or otherwise, except from an interested
party for a particular service or other services related therewith, without the consent of all
parties concerned.
d. He shall exercise fairness and justice when dealing with contracts between his clients or
employers and the contractors.
e. He shall not accept any commissions or allowances, directly or indirectly, from contractors,
suppliers, and all other parties dealing with his clients and/or employers in connection with the
work for which he is responsible.
f. He shall not be financially interested in the bid or bids of contractors, suppliers, and other
interested parties participating in a competitive work or job on which he has been employed as
engineer without full knowledge and consent of his clients or employers.
g. He shall promptly inform his clients or employers of any business in which he has any interest,
business connection, or affiliation which may compete with or affect the business of his clients
or employers.
h. He shall not allow any decision in connection with his work for which he has been employed or
on which he may be called to perform, to be affected by interest in any business.
i. He will present clearly the consequences to be expected from deviations proposed if his
engineering judgment is overruled by non-technical authority in cases where he is responsible
for the technical adequacy of engineering work.
j. He shall undertake only those engineering assignments for which he is qualified. He shall engage
or advise his employer or client to engage specialists and shall cooperate with them whenever
his employer's or client's interests are served best by such an arrangement.
a. He shall individually or collectively with others in the profession protect the profession from
misunderstanding and/or misrepresentations.
b. He shall not directly or indirectly injure the professional reputation, prospects, and
advancement, and/or practice of other engineers. However, if he has proof or personal
knowledge that an engineer has been unethical and/or illegal in his practices he shall inform in
writing the proper authorities for appropriate action.
c. He shall uphold the principle of appropriate and adequate compensation for those engaged in
the engineering profession, including those in the subordinate capabilities in the interest of
public service, and maintain the standards of the profession.
d. He shall not try to supplant another engineer in a particular employment after becoming aware
that definite steps have been taken towards the other's employment.
e. He shall not compete, by underbidding through reduction in his normal fees on the basis of
charges for work, after having been informed of the charges submitted by another engineer.
f. He shall be fair and tolerant in his dealings with fellow engineers and give credit to those to
whom credit is properly due.
g. He shall uphold the honor and dignity of his profession and avoid association in responsibility for
work with engineers who do not conform to ethical practices.
h. He shall exercise due restraint in criticizing another engineer's work in public, recognizing the
fact that the engineering societies and the engineering press provide the proper forum for
technical discussions and criticism.
a. He shall cooperate in extending the effectiveness of the engineering profession and endeavor to
be well-informed of the latest development in the profession by sharing or exchanging
information and experience with other engineers, other professionals, and students, and by
contributing to engineering publications and participating in the activities of engineering
societies.
b. He shall cooperate in upholding the integrity and honor of the profession by avoiding all conduct
and practices that will be discrediting and injurious to the profession.
c. He shall be dignified in explaining and discussing his work and shall refrain from self-laudatory
advertising or propaganda.
Section 2. Annual Report. Within sixty (60) days following the end of each calendar year, the Board shall
submit to the Commission on Annual Report on its activities including appropriate recommendations.
Section 3. Roster of Aeronautical Engineers. There shall be a roster of aeronautical engineers showing
their names, addresses, and places of practice. To keep the roster updated, every registered
aeronautical engineer will report to the Board any change in address and place of practice, and the
name(s) of person(s) authorized by him to receive notices, communications, and other papers from the
commission or the Board.
Section 4. Amendment. Any section of these Rules and Regulations may be amended by the Board,
subject to the approval of the Commission, as the need for such amendment arises.
Section 5. Effectivity. These Rules and Regulations including the Code of Professional Ethics, when
approved by the Commission, shall take shall take effect fifteen (15) days following the date of their
publication in the Official Gazette.
Adopted by the Board of Aeronautical Engineering at the Metropolitan Manila, Philippines, this 23rd day
of September, 1982.
Acting Chairman
Acting Member
Acting Member
Approved and promulgated as the Rules and Regulations of the Board of Aeronautical Engineering this
12th day of October, 1982