The document provides instructions for drawing the projections of various geometric objects, including lines, cylinders, prisms, pyramids, and cones, where the objects are placed in different positions relative to the horizontal and vertical planes and inclined at various angles. Specifically, it describes 12 problems where the dimensions and positioning of each object are given and the task is to draw the projections.
The document provides instructions for drawing the projections of various geometric objects, including lines, cylinders, prisms, pyramids, and cones, where the objects are placed in different positions relative to the horizontal and vertical planes and inclined at various angles. Specifically, it describes 12 problems where the dimensions and positioning of each object are given and the task is to draw the projections.
The document provides instructions for drawing the projections of various geometric objects, including lines, cylinders, prisms, pyramids, and cones, where the objects are placed in different positions relative to the horizontal and vertical planes and inclined at various angles. Specifically, it describes 12 problems where the dimensions and positioning of each object are given and the task is to draw the projections.
1. A line AB 65mm long has its end A, 10mm above HP and 1.
1. A line AB 65mm long has its end A, 10mm above HP and
25mm in front of VP. It is inclined at 65° to HP and 25° to 25mm in front of VP. It is inclined at 65° to HP and 25° to VP. Draw its projections. VP. Draw its projections. 2. A cylinder of base diameter 50 mm and length 70 mm is 2. A cylinder of base diameter 50 mm and length 70 mm is resting on a point on its base on HP. The axis of the resting on a point on its base on HP. The axis of the cylinder is inclined at 40⁰ to HP and is parallel to VP. cylinder is inclined at 40⁰ to HP and is parallel to VP. Draw its projections. Draw its projections. 3. A pentagonal prism of base side 35mm, axis height 3. A pentagonal prism of base side 35mm, axis height 60mm is resting on HP on one of its base edges with its 60mm is resting on HP on one of its base edges with its axis inclined at 45˚ to HP and parallel to VP. Draw the axis inclined at 45˚ to HP and parallel to VP. Draw the projections of the prism. projections of the prism. 4. A pentagonal prism of base side 30 mm and axis length 4. A pentagonal prism of base side 30 mm and axis length 60 mm is suspended from one of its top face corners. 60 mm is suspended from one of its top face corners. Draw its projection Draw its projection 5. A hexagonal pyramid of base side 30mm, axis height 5. A hexagonal pyramid of base side 30mm, axis height 50mm is resting on HP on one of its base corners with its 50mm is resting on HP on one of its base corners with its base inclined at 35˚ to HP and parallel to VP. Draw the base inclined at 35˚ to HP and parallel to VP. Draw the projections of the prism. projections of the prism. 6. A hexagonal prism of base side 30 mm and axis length 65 6. A hexagonal prism of base side 30 mm and axis length 65 mm is resting on HP on one of its rectangular face on HP. mm is resting on HP on one of its rectangular face on HP. The axis of the prism is inclined at 40⁰ to VP and parallel The axis of the prism is inclined at 40⁰ to VP and parallel to HP. Draw its projection to HP. Draw its projection 7. A pentagonal pyramid of base side 30mm and axis 7. A pentagonal pyramid of base side 30mm and axis height 55mm is resting on HP on one of its base edges height 55mm is resting on HP on one of its base edges with the face containing the resting edge perpendicular with the face containing the resting edge perpendicular to both HP and VP. Draw its projections to both HP and VP. Draw its projections 8. . A cone of base diameter 60 mm and height 75 mm is 8. . A cone of base diameter 60 mm and height 75 mm is lying on one of its generators on HP. Draw its projection lying on one of its generators on HP. Draw its projection 9. A cylinder of base diameter 40mm and axis length 60mm 9. A cylinder of base diameter 40mm and axis length 60mm is resting on HP on one of its generators with its axis is resting on HP on one of its generators with its axis inclined 45˚ to VP. Draw its projection inclined 45˚ to VP. Draw its projection 10. The midpoint of a straight line AB 90mm long is 60mm 10. The midpoint of a straight line AB 90mm long is 60mm above HP and 50mm in front of VP. It is inclined 45° to above HP and 50mm in front of VP. It is inclined 45° to VP and 30° to HP. draw the projections. VP and 30° to HP. draw the projections. 11. A line Livi 70 mm long has its end L lOmm above HP 11. A line LO 70 mm long has its end L lOmm above HP and 15 mm m front of VP. Its top View and front and 15 mm m front of VP. Its top View and front View measures 60 mm and 40 mm respectively. View measures 60 mm and 40 mm respectively. Draw the projections of the line and determine Draw the projections of the line and determine Its mclmatrons with HP and VP Its mclmatrons with HP and VP 12. A pentagonal pyramid of base side 30mm, axis height 12. A pentagonal pyramid of base side 30mm, axis height 50mm is resting on HP on one of its slant edges .draw its 50mm is resting on HP on one of its slant edges .draw its projections projections