Professional Documents
Culture Documents
h a n g e Pro
320B, 320B L, 320B LN, 320B N & 320B S Excavators 5MS00001-UP (MACHINE) PO... Page 1 of 6 XChange Pro
F- d F- d
uc
uc
PD
PD
!
!
W
W
t
t
O
O
N
N
y
y
bu
bu
to
to
ww
ww
om
om
k
k
lic
lic
C
C
.c
.c
w
w
tr re tr re
.
.
ac ac
k e r- s o ft w a k e r- s o ft w a
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320B S EXCAVATOR 5MS00353
Configuration: 320B, 320B L, 320B LN, 320B N & 320B S Excavators 5MS00001-UP (MACHINE) POWERED BY 3116 Engine
i00790351
NOTICE
Never remove the fill/vent plug from the hydraulic tank if the oil is hot.
Note: The hydraulic oil tank is on the right side of the machine.
https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 10/27/2020
XC
h a n g e Pro
320B, 320B L, 320B LN, 320B N & 320B S Excavators 5MS00001-UP (MACHINE) PO... Page 2 of 6 XChange Pro
F- d F- d
uc
uc
PD
PD
!
!
W
W
t
t
O
O
N
N
y
y
bu
bu
to
to
ww
ww
om
om
k
k
lic
lic
C
C
.c
.c
w
w
tr re tr re
.
.
ac ac
k e r- s o ft w a k e r- s o ft w a
Illustration 1 g00101347
Excavator
Position the machine with the stick in the vertical position and the implement on the ground.
Illustration 2 g00368266
Retract the stick cylinder. Extend the boom cylinders. Place the bucket on the ground.
https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 10/27/2020
XC
h a n g e Pro
320B, 320B L, 320B LN, 320B N & 320B S Excavators 5MS00001-UP (MACHINE) PO... Page 3 of 6 XChange Pro
F- d F- d
uc
uc
PD
PD
!
!
W
W
t
t
O
O
N
N
y
y
bu
bu
to
to
ww
ww
om
om
k
k
lic
lic
C
C
.c
.c
w
w
tr re tr re
.
.
ac ac
k e r- s o ft w a k e r- s o ft w a
Illustration 3 g00368271
Completely raise the boom and position the tool as close as possible to the machine.
https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 10/27/2020
XC
h a n g e Pro
320B, 320B L, 320B LN, 320B N & 320B S Excavators 5MS00001-UP (MACHINE) PO... Page 4 of 6 XChange Pro
F- d F- d
uc
uc
PD
PD
!
!
W
W
t
t
O
O
N
N
y
y
bu
bu
to
to
ww
ww
om
om
k
k
lic
lic
C
C
.c
.c
w
w
tr re tr re
.
.
ac ac
k e r- s o ft w a k e r- s o ft w a
Illustration 4 g00270080
Material handler
Completely raise the boom and fully retract the stick cylinder.
Illustration 5 g00368333
Coal shovel
Position the bucket on the ground and position the bucket as close as possible to the machine.
https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 10/27/2020
XC
h a n g e Pro
320B, 320B L, 320B LN, 320B N & 320B S Excavators 5MS00001-UP (MACHINE) PO... Page 5 of 6 XChange Pro
F- d F- d
uc
uc
PD
PD
!
!
W
W
t
t
O
O
N
N
y
y
bu
bu
to
to
ww
ww
om
om
k
k
lic
lic
C
C
.c
.c
w
w
tr tr
re
2. Position the machine in a position that is shown in illustration 1, 2, 3, 4, or 5. re
.
.
ac ac
k e r- s o ft w a k e r- s o ft w a
Illustration 6 g00101524
Illustration 7 g00104886
Note: On the 320B Excavator, the sight gauge is on the side of the machine. The access door
does not need to be opened.
https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 10/27/2020
XC
h a n g e Pro
320B, 320B L, 320B LN, 320B N & 320B S Excavators 5MS00001-UP (MACHINE) PO... Page 6 of 6 XChange Pro
F- d F- d
uc
uc
PD
PD
!
!
W
W
t
t
O
O
N
N
y
y
bu
bu
to
to
ww
ww
om
om
k
k
lic
lic
C
C
.c
.c
w
w
tr tr
re
4. For a cold machine, maintain the hydraulic oil level in the low temperature range. For a re
.
.
ac ac
k e r- s o ft w a k e r- s o ft w a
machine that is at normal operating temperature, maintain the hydraulic oil level in the high
temperature range.
Illustration 8 g00101541
Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for
information about containing fluid spillage.
5. Slowly loosen the filler plug in order to relieve any pressure. Add oil, if necessary.
6. Check the O-ring seal on the filler plug. Replace the O-ring seal if the O-ring seal is damaged.
Copyright 1993 - 2020 Caterpillar Inc. Tue Oct 27 16:59:45 PDT 2020
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 10/27/2020